This device is able to duplicate several types of remote control for gates, garage doors, traffic barriers, which transmit in frequencies between 224 and 868 MHz. Each button is independent, so it's possible to clone up to 4 different remote controls, even if they operates in different frequencies.
Duplication
Duplication is very very easy, and do NOT require any external equipment (frequency counter, programming machine, sniffer):
- Press together buttons 1 and 2, until LED becomes green.
- Release all buttons.
- Press the button where you wish to copy the original remote control: duplicator starts scanning the supported frequencies
- Start to transmit by pressing and holding the button on the original remote control from a short distance (few centimeters)
When duplication ends, LED flashes 2 times in case of fixed code, or 4 times in case of rolling code. Then LED becomes green and duplication procedure restart from point 3.
In case that Led flashed 4 times (rolling code), the duplicated code may not work.
At step #3 it's possible to push the button N times to set the desired frequency, instead of let the duplicator scans over the supported frequencies. Please check the frequency table: press 2 for 433.92 MHz, 3 for 868.3 MHz, ...
After duplication, please test that code was copied correctly and that it's really a fixed code, by transmitting 2 or more times to assure that the gate or garage door reacts correctly to all transmissions.
Initialization of a random 32 bit code
Follow the instructions below to set a new random code on one or more buttons:
- Press together buttons 3 and 4, until LED becomes green (about 5 seconds).
- Release all buttons.
- Press 2 or more times the button where you wish to initialize the code (2 for 433.92MHz, 3 for 868.3 MHz)
The remote control emits 2 flashes, then it's possible to initialize a new random code on another button repeating the procedure from point 3.
This feature is useful mainly for two reasons:
- Remove a previously stored code from the remote control, for example after showing duplication procedure to a customer.
- Program a random code that may be used with a universal receiver.
Battery status and replacement
If, during transmission or duplication, both LEDs blink (red and green), the battery voltage is low due to a very low temperature or flat battery. In the latter case, the enclosure should be opened loosening the 2 screws, picking up the board and replacing the existing battery with a new CR2032 battery.
Product look
The remote control is provided with a factory programmed unique code, battery already installed, with a snap hook, ready to use and 2 years warranty.
Everything is packed in a nice transparent resealable clamshell with multi-language manual.
Companies who'd like to distribute our products can ask for customized instructions with the preferred languages, brand and model name and logo.
Other documents
- Instructions in english/french/german/italian/dutch/spanish/portuguese
- Video that shows how to use Creasol Multi
![See the video that show how easy is duplication of 4 remote controls, operating in different frequencies!]( "See the video that show how easy is duplication of 4 remote controls, operating in different frequencies!")
- Application notes that show our products in brief and some examples/schematics, in PDF format
You may also like
- FourST: 4 channels 433.92MHz remote control duplicator
- Four: 4 channels 433.92MHz remote control duplicator
- MultiST: 4 channels multi-frequency remote control duplicator
- Multi: 4 channels multi-frequency remote control duplicator
- UniRec1: 1 channel compact multi-frequency universal receiver
- UniRec12: 2 channels compact multi-frequency universal receiver
- UniRec2: 2 channel universal multi-frequency universal receiver
- UniLock: electric lock opener for pedestrian gate or main door
- Domotic modules with inputs/outputs/sensors
- EVSE module to make DIY WALLBOX charging electric vehicles
