Our compact universal receiver UniRec1 should be connected to HORMANN / TUBAUTO automation in this way:
UniRec1 should be connected in this way:
* connect 1 supply wire to terminal 5
* connect the other supply wire to terminal 20
* connect Switch+ wire to terminal 21
* connect Switch- wire to terminal 20
If you plan to use our 2 channel UniRec2 receiver, just connect power supply to terminals 5 and 20, and relay outputs to terminals 21 and 20: with UniRec2 you should not care about polarity.
This schema is valid even for Garador Garamatic 9
New and updated products
News
- FAQ veicoli elettrici e fotovoltaico
- Installazione di un' immagine Rasbian + Domoticz ottimizzata su Raspberry Pi3, Pi4 o Pi5
- Integrazione del sistema di illuminazione che utilizza relè a passi successivi in Home Assistant, Domoticz, ...
- Collegamento di una rete di moduli DomBus tramite TCP (WiFi, Ethernet, ...) o collegamento radio wireless
- Prezzi e costi orari dell'elettricità per i paesi dell'UE e previsioni produzione energia solare fotovoltaica: script Domoticz
- Come realizzare un impianto domotico utilizzando i moduli DomBus
- Creasol DomBusGateway: bridge DomBus 2 MQTT per HomeAssistant, NodeRED, OpenHAB, ioBroker, MQTT...
- Realizzare una wallbox intelligente fatta in casa fai-da-te che funziona con Home Assistant per caricare i veicoli elettrici
- Consigli: cosa predisporre in una casa nuova (o in ristrutturazione) per poterla domotizzare
- CR2032 Lithium-Manganese battey passivation layer
- Creasol DomBus and Home Assistant
- Domoticz, affidabile sistema domotico gratuito e open source
How to connect UniRec* universal receivers to Hormann Tubauto Procom 7
Our compact universal receiver UniRec1 should be connected to HORMANN / TUBAUTO automation in this way:
UniRec1 should be connected in this way:
* connect 1 supply wire to terminal 5
* connect the other supply wire to terminal 20
* connect Switch+ wire to terminal 21
* connect Switch- wire to terminal 20
If you plan to use our 2 channel UniRec2 receiver, just connect power supply to terminals 5 and 20, and relay outputs to terminals 21 and 20: with UniRec2 you should not care about polarity.
This schema is valid even for Garador Garamatic 9
