Connecting Creasol UniRec1
* Connect one Supply wire with Switch- wire to terminal 1 (GND)
* Connect Switch+ wire to terminal 2 (Impulse)
* Connect the other Supply wire to terminal 3 (24V)
Connecting Creasol UniRec2
* Connect terminal 1 of Supramatic (GND) to terminal -/~ and one of Relay1
* Connect terminal 3 of Supramatic (24V) to terminal +/~
* Connect terminal 2 of Supramatic (Impulse) to the other terminal of Relay1
Proceed with the instructions to configure the frequency of the receiver (if different from 433.92MHz) and to program one or different remote controls.
That's all.
New and updated products
News
- FAQ veicoli elettrici e fotovoltaico
- Installazione di un' immagine Rasbian + Domoticz ottimizzata su Raspberry Pi3, Pi4 o Pi5
- Integrazione del sistema di illuminazione che utilizza relè a passi successivi in Home Assistant, Domoticz, ...
- Collegamento di una rete di moduli DomBus tramite TCP (WiFi, Ethernet, ...) o collegamento radio wireless
- Prezzi e costi orari dell'elettricità per i paesi dell'UE e previsioni produzione energia solare fotovoltaica: script Domoticz
- Come realizzare un impianto domotico utilizzando i moduli DomBus
- Creasol DomBusGateway: bridge DomBus 2 MQTT per HomeAssistant, NodeRED, OpenHAB, ioBroker, MQTT...
- Realizzare una wallbox intelligente fatta in casa fai-da-te che funziona con Home Assistant per caricare i veicoli elettrici
- Consigli: cosa predisporre in una casa nuova (o in ristrutturazione) per poterla domotizzare
- CR2032 Lithium-Manganese battey passivation layer
- Creasol DomBus and Home Assistant
- Domoticz, affidabile sistema domotico gratuito e open source
How to connect UniRec* receivers to Hormann Supramatic S
Connecting Creasol UniRec1
* Connect one Supply wire with Switch- wire to terminal 1 (GND)
* Connect Switch+ wire to terminal 2 (Impulse)
* Connect the other Supply wire to terminal 3 (24V)
Connecting Creasol UniRec2
* Connect terminal 1 of Supramatic (GND) to terminal -/~ and one of Relay1
* Connect terminal 3 of Supramatic (24V) to terminal +/~
* Connect terminal 2 of Supramatic (Impulse) to the other terminal of Relay1
Proceed with the instructions to configure the frequency of the receiver (if different from 433.92MHz) and to program one or different remote controls.
That's all.
