Creasol UniRec1 universal receiver can be connected to the SCS SENTINEL board ACCESS-602 to allow controlling that board by another kind of remote control, for example to use a single remote control to open more than one automation.
Connect one Power Supply wire to terminal 11
Connect the other Power Supply wire to terminal 12
Connect Switch+ to terminal 4
Connect Switch- to terminal 3
Then, program the receiver to learn one or more remote controls, and check that it works.
If it does not open the automation, exchange the connections to terminal 4 with terminal 3, and vice versa.
New and updated products
News
- FAQ veicoli elettrici e fotovoltaico
- Installazione di un' immagine Rasbian + Domoticz ottimizzata su Raspberry Pi3, Pi4 o Pi5
- Integrazione del sistema di illuminazione che utilizza relè a passi successivi in Home Assistant, Domoticz, ...
- Collegamento di una rete di moduli DomBus tramite TCP (WiFi, Ethernet, ...) o collegamento radio wireless
- Prezzi e costi orari dell'elettricità per i paesi dell'UE e previsioni produzione energia solare fotovoltaica: script Domoticz
- Come realizzare un impianto domotico utilizzando i moduli DomBus
- Creasol DomBusGateway: bridge DomBus 2 MQTT per HomeAssistant, NodeRED, OpenHAB, ioBroker, MQTT...
- Realizzare una wallbox intelligente fatta in casa fai-da-te che funziona con Home Assistant per caricare i veicoli elettrici
- Consigli: cosa predisporre in una casa nuova (o in ristrutturazione) per poterla domotizzare
- CR2032 Lithium-Manganese battey passivation layer
- Creasol DomBus and Home Assistant
- Domoticz, affidabile sistema domotico gratuito e open source
How to connect UniRec1 to SCS-SENTINEL ACCESS 602 CTRL 51
Creasol UniRec1 universal receiver can be connected to the SCS SENTINEL board ACCESS-602 to allow controlling that board by another kind of remote control, for example to use a single remote control to open more than one automation.
Connect one Power Supply wire to terminal 11
Connect the other Power Supply wire to terminal 12
Connect Switch+ to terminal 4
Connect Switch- to terminal 3
Then, program the receiver to learn one or more remote controls, and check that it works.
If it does not open the automation, exchange the connections to terminal 4 with terminal 3, and vice versa.
