Creasol FourST: long range 433.92 MHz remote control duplicator with soft-touch case

Remote controls

Light-weight (only 16g), soft-touch cover and long range remote control duplicator 433.92MHz.

Creasol FourST: Duplicate your remote controls easily!!

This remote control is able to copy several types of fixed code remote control for gates, garage doors, traffic barriers, which transmit in 433.92 MHz.

Duplication is very easy: code is learned automatically, without the need of external equipment.

Each button is independent, so it's possible to clone up to 4 different remote controls.

The remote control is made in EU, supplied in a nice transparent resealable recyclable clamshell, with instructions printed in several languages, 3V battery already installed, mobile strap, and 2 years warranty.

Available in different colors.

The remote control is provided with a factory programmed unique code, battery already installed, with a mobile strap and 2 years warranty.
Everything is packed packed in a nice transparent resealable clamshell with multi-language manual.

Duplication

Duplication is very very easy, and do NOT require any external equipment (frequency counter, programming machine, sniffer):

Press together buttons 1 and 2, until LED becomes green.
Release all buttons.
Press the button where you wish to copy the original remote control.
Start to transmit by pressing and holding the button on the original remote control from a short distance (few centimeters)

When duplication ends, LED flashes 2 times in case of fixed code, or 4 times in case of rolling code. Then LED becomes green and duplication procedure restart from point 3.

In case that led flashed 4 times (rolling code), the duplicated code may not work.

After duplication, please test that code was copied correctly and that it's really a fixed code, by transmitting at least twice to assure that the gate or garage door reacts correctly to both transmissions.

Initialization of a random 32 bit code

Follow the instructions below to set a new random code on one or more buttons:

Press together buttons 3 and 4, until LED becomes green (about 5 seconds).
Release all buttons.
Press twice the button where you wish to initialize the code.

The remote control emits 2 flashes, then it's possible to initialize a new random code on another button repeating the procedure from point 3.

This feature is useful mainly for two reasons:

Remove a previously stored code from the remote control, for example after showing duplication procedure to a customer.
Program a random code that may be used with a universal receiver.

Battery status and replacement

If, during transmission or duplication, both LEDs blink (red and green), the battery voltage is low due to a very low temperature or flat battery. In the latter case, the remote control shell should be opened (insert a screwdriver in the bottom-left corner) to replace the CR2032 lithium cell inside.

Product look

The remote control is provided with a factory programmed unique code, battery already installed, with a mobile strap, ready to use and 2 years warranty.
Everything is packed in a nice transparent resealable clamshell with multi-language manual.

Companies who'd like to distribute our products can ask for customized instructions with the preferred languages, brand and model name and logo.