Connecting Creasol UniRec1
* Connect one Supply wire with Switch- wire to terminal 1 (GND)
* Connect Switch+ wire to terminal 2 (Impulse)
* Connect the other Supply wire to terminal 3 (24V)
Connecting Creasol UniRec2
* Connect terminal 1 of Supramatic (GND) to terminal -/~ and one of Relay1
* Connect terminal 3 of Supramatic (24V) to terminal +/~
* Connect terminal 2 of Supramatic (Impulse) to the other terminal of Relay1
Proceed with the instructions to configure the frequency of the receiver (if different from 433.92MHz) and to program one or different remote controls.
That's all.
New and updated products
News
- Creasol DomBusGateway: puente DomBus 2 MQTT para HomeAssistant, NodeRED, OpenHAB, ioBroker, MQTT...
- Precios y costes de la electricidad por hora en los países de la UE y previsión de la producción de energía solar fotovoltaica: script de Domoticz
- FAQ veicoli elettrici e fotovoltaico
- Instalación de una imagen optimizada de Rasbian + Domoticz en Raspberry Pi 3, Pi 4 o Pi 5.
- Integración del sistema de iluminación que utiliza relés paso a paso en Home Assistant, Domoticz, ...
- Conexión de una red de módulos DomBus a través de TCP (WiFi, Ethernet, ...) o enlace de radio inalámbrico
- Cómo construir un sistema domótico utilizando módulos DomBus
- Cómo hacer una caja de pared inteligente casera que funciona con Home Assistant para cargar vehículos eléctricos
- Sugerencias: qué preparar en una casa nueva (o reformada) para poder automatizarla
- CR2032 Lithium-Manganese battey passivation layer
- Creasol DomBus and Home Assistant
- Domoticz, sistema domótico fiable, gratuito y de código abierto
How to connect UniRec* receivers to Hormann Supramatic S
Connecting Creasol UniRec1
* Connect one Supply wire with Switch- wire to terminal 1 (GND)
* Connect Switch+ wire to terminal 2 (Impulse)
* Connect the other Supply wire to terminal 3 (24V)
Connecting Creasol UniRec2
* Connect terminal 1 of Supramatic (GND) to terminal -/~ and one of Relay1
* Connect terminal 3 of Supramatic (24V) to terminal +/~
* Connect terminal 2 of Supramatic (Impulse) to the other terminal of Relay1
Proceed with the instructions to configure the frequency of the receiver (if different from 433.92MHz) and to program one or different remote controls.
That's all.
