
- Kategorie: Home automation
Creasol DomBus12 ist ein kompaktes Modul , 40x30x11mm, mit 9 konfigurierbaren Ein-/Ausgängen .
Es kann über einen seriellen RS485-Bus (4 Drähte, 2 für 12/24-V-Stromversorgung und 2 für Daten mit 115200 Bit/s) an den Domoticz-Controller angeschlossen werden.
Wie andere DomBus-Geräte ist auch DomBus12 darauf ausgelegt, wenig Strom zu verbrauchen, zuverlässig, vollständig konfigurierbar und einfach zu bedienen zu sein . Jeder Port ist vollständig konfigurierbar, zB als analoger oder digitaler Eingang, Twinbutton (Doppeltaster), Zähler, Summer, NTC 10k, ... 2 Ports können als Open-Drain-Ausgang verwendet werden, um 2 externe Relais oder LEDs zu aktivieren.

- Kategorie: Home automation
Reliable low-power domotic module designed to enable/disable loads saving energy consumption, zeroing the standby power.

- Kategorie: Home automation
Creasol DomBus23 is a module for home automation system with several different kind of configurable inputs/outputs in a short size: 74x72x24mm.

- Kategorie: Home automation
AVAILABLE IN TWO VERSIONS: DomBus protocol and Modbus protocol!
Creasol DomBus31 is a din-rail relay module, 115x90x40mm, with 8 relays outputs. 6 relays are SPST (Normally Open outputs) with 250V 5A max capability, and 2 relays are SPDT (both Normally Open and Normally Closed outputs) with 10A capability. High efficiency module, with very low power consumption, only 600mW with all relays ON.

- Kategorie: Home automation
DomBus32 ist ein 54 mm breites DIN-RAIL-Modul mit 3 Relaisausgängen , 3 AC-Eingängen und 5 Niederspannungs-E/A .
IN ZWEI VERSIONEN VERFÜGBAR: DomBus -Protokoll und Modbus -Protokoll!

- Kategorie: Home automation
DomBus33 is a DIN-RAIL module, 54mm wide, designed to control an existing lighting system with 3 lights using 115/230V pushbuttons and step-by-step relays.

- Kategorie: Home automation
DomBus34 is a DIN-RAIL module, 54mm wide, designed to interface up to 4 power/energy meters, type DDS 238-2 ZN/S (Modbus), to measure power and energy (both imported and exported), voltage frequency and power factor.

- Kategorie: Home automation
Creasol DomBus36 ist ein DIN-Schienen-Relaismodul in Industriequalität für Gebäudeautomatisierung und Heimautomatisierungssysteme, 115 x 90 x 40 mm, mit 12 Relaisausgängen, SPST (normalerweise offene Ausgänge) mit max. 250 V, 5 A Belastbarkeit, aufgeteilt in 3 Gruppen mit je 4 Relais, jede Gruppe mit einem 5-Positionen-Schraubklemmenblock: 1 gemeinsamer Anschluss + 4 Ausgänge

- Kategorie: Home automation
DIN-Schienen-Domotikmodul, 115 x 90 x 40 mm, unterstützt sowohl DomBus- als auch Modbus RTU-Protokolle und integriert 12 analoge/digitale Niederspannungseingänge, 3 Relaisausgänge und 3 115-Vac-/230-Vac-Eingänge . Optional kann es die Stromversorgung einer externen Einbruchalarmsirene steuern und überwachen.
Geeignet für die Verbindung von Alarmsensoren (Magnetkontaktsensoren, PIRs, Manipulationsmelder), die Überwachung von Stromausfällen (über die 3 AC-Eingänge) und die Steuerung von bis zu 3 Ausgängen (Relais).

- Kategorie: Home automation
DIN-rail high reliability and low power home automation module with relays output, low voltage inputs, one 100-250Vac input and plugin terminal blocks.Works with home automation systems like Domoticz, Home Assistant, Node-RED, OpenHAB and more...
Can be used to manage alarm sensors, pushbuttons, lights and other loads, and monitor 230V presence (detecting power outage).

- Kategorie: Home automation
Creasol DomBusEVSE ist ein vollständig getestetes DIN-Schienenmodul, das für die Hausautomationssysteme Domoticz, Home Assistant, OpenHAB, Node-RED, ioBroker usw. entwickelt wurde, um Elektrofahrzeuge mit dem Standard SAE 1772 und IEC 62196-2 Mode3 (AC-Ladung) aufzuladen , bis zu 22 kW Leistung).
Es funktioniert als eigenständiges Gerät (mit oder ohne Domotik-Controller) oder im verwalteten Modus (Ladestrom wird von einem Domotik-Controller gesteuert).

- Kategorie: Home automation
Creasol DomBusTH is a fully configurable small electronic board, 32x17mm, that can fit any blank cover with a 3.5mm hole in the centre, needed by the thermal/humidity sensor to exchange air with the room and to get the 3 LEDs light out. It can be connected to a Domoticz controller using the DomBus protocol, and other contollers (Node-RED, HomeAssistant, OpenHAB, ...) using the standard Modbus protocol by RS485 serial bus (using a standard alarm cable with 4 wires, 2 for 12/24V power supply, and 2 for data at 115200bps). Available in both DomBus and Modbus protocols

- Kategorie: Home automation
Heimautomatisierungsmodul, das als eigenständiger Tracker verwendet werden kann und autonom arbeitet.
Kann auch durch ein Hausautomationssystem gesteuert werden , wie Domoticz (DomBusTracker-Version mit DomBus-Protokoll-Firmware), Home Assistant, Node-RED, OpenHAB , ... (DomBusTracker-Version mit Modbus-Protokoll-Firmware).

- Kategorie: Home automation
ESP8266 is a very powerful and cheap MCU equipped with WiFi transceiver, very useful to expand inputs/outputs of a Raspberry/Domoticz controller.
Creasol DomESP1 board is designed for ESP8266 module NodeMCU V3, with 900 mils header pitch (optionally, soldering additional headers, it's possible to use the 1100mils module or WeMos D1 mini module), and integrates the whole circuitry to manage digital inputs, one analog input, 4 relay outputs, 1 low voltage output, I2C bus, 1wire bus and 2 mosfet outputs with 12A 30Vmax capability.

- Kategorie: Home automation
Creasol DomRelay2 is a compact module, 43x24x25mm, within 2 relays with 12V 200mW coil, 250V 5A SPST contact with special material designed to prevent contact welding due to excessively high surge current load (capacitive loads or tungsten lamps).
Contacts are protected from overvoltage by metal oxide varistors; coils are protected from overvoltage by free-wheeling diodes.
Relay coil should be driven at 12Vdc 17mA: using DomBusTH or DomBus12 modules it's possible to drive relays using a lower power system, consuming less than 1/4 of nominal power.