Our compact universal receiver UniRec1 should be connected to HORMANN / TUBAUTO automation in this way:
UniRec1 should be connected in this way:
* connect 1 supply wire to terminal 5
* connect the other supply wire to terminal 20
* connect Switch+ wire to terminal 21
* connect Switch- wire to terminal 20
If you plan to use our 2 channel UniRec2 receiver, just connect power supply to terminals 5 and 20, and relay outputs to terminals 21 and 20: with UniRec2 you should not care about polarity.
This schema is valid even for Garador Garamatic 9
New and updated products
News
- Hourly electricity prices and costs, solar photovoltaic energy production forecast and Power System Flexibility: Domoticz script
- Suggestions: what to prepare in a new (or renovated) home to be able to automate it
- FAQ veicoli elettrici e fotovoltaico
- Connecting a network of DomBus modules through TCP (WiFi, Ethernet, ...) or wireless radio link
- Making a DIY homemade Smart Wallbox working with Home Assistant to charge electric vehicles
- Creasol DomBusGateway: DomBus 2 MQTT bridge for HomeAssistant, NodeRED, OpenHAB, ioBroker, MQTT...
- Installing an optimized Rasbian + Domoticz image on Raspberry PI4 or PI3
- CR2032 Lithium-Manganese battey passivation layer
- Creasol DomBus and Home Assistant
- Domoticz, reliable free and open source home automation system
- Free domotic system controlling heat pump to optimize power consumption from photovoltaic
- Connecting UniRec1 receiver to Berner GA 103 or GA 203 or GA 403 motor driver to use any remote control with Berner automations
Support
How to connect UniRec* universal receivers to Hormann Tubauto Procom 7
Our compact universal receiver UniRec1 should be connected to HORMANN / TUBAUTO automation in this way:
UniRec1 should be connected in this way:
* connect 1 supply wire to terminal 5
* connect the other supply wire to terminal 20
* connect Switch+ wire to terminal 21
* connect Switch- wire to terminal 20
If you plan to use our 2 channel UniRec2 receiver, just connect power supply to terminals 5 and 20, and relay outputs to terminals 21 and 20: with UniRec2 you should not care about polarity.
This schema is valid even for Garador Garamatic 9
