Creasol MultiST: Universal multi-frequency remote control duplicator with soft-touch casing

Remote controls

Multifrequency remote control, light-weight (only 16g), soft-touch cover, that transmits at 433 MHz and 868 MHz.

Creasol MultiST: Duplicate your remote controls easily!!

This remote control is able to copy several types of remote control for gates, garage doors, traffic barriers, which transmit in frequencies between 224 and 868 MHz (433.92, 868.3, 315, 403.55, 418MHz, and other frequencies between 224 MHz and 390 MHz). Range from 224MHz to 418MHz is not enable for EU market.

Duplication is very easy: both frequency and code are learned automatically, without the need of external equipments.

Each button is independent, so it's possible to clone up to 4 different remote controls, even if they transmit in different frequencies. For example, you can program CAME TOP432 (433.92 MHz) on button 1, HORMANN HSM4 (868.3) on button 2, LIFTMASTER 63LM (390 MHz) on button 3 and LINEAR Multicode (300 MHz) on button 4. Any supported code and frequency combination is possible. See the compatibility and incompatibility tables below.

The remote control is made in EU, supplied in a nice transparent resealable recyclable clamshell, with instructions printed in several languages, 3V lithium battery (CR2032) already installed, mobile strap, and 2 years warranty.

Available in different colors.

Duplication

Duplication is very very easy, and do NOT require any external equipment (frequency counter, programming machine, sniffer):

Press together buttons 1 and 2, until LED becomes green.
Release all buttons.
Press the button where you wish to copy the original remote control: duplicator starts scanning the supported frequencies
Start to transmit by pressing and holding the button on the original remote control from a short distance (few centimeters)

When duplication ends, LED flashes 2 times in case of fixed code, or 4 times in case of rolling code. Then LED becomes green and duplication procedure restart from point 3.

In case that Led flashed 4 times (rolling code), the duplicated code may not work.

At step #3 it's possible to push the button N times to set the desired frequency, instead of let the duplicator scans over the supported frequencies. Please check the frequency table: press 2 for 433.92 MHz, 3 for 868.3 MHz, ...
After duplication, please test that code was copied correctly and that it's really a fixed code, by transmitting 2 or more times to assure that the gate or garage door reacts correctly to all transmissions.

Initialization of a random 32 bit code

Follow the instructions below to set a new random code on one or more buttons:

Press together buttons 3 and 4, until LED becomes green (about 5 seconds).
Release all buttons.
Press 2 or more times the button where you wish to initialize the code (2 for 433.92MHz, 3 for 868.3 MHz)

The remote control emits 2 flashes, then it's possible to initialize a new random code on another button repeating the procedure from point 3.

This feature is useful mainly for two reasons:

Remove a previously stored code from the remote control, for example after showing duplication procedure to a customer.
Program a random code that may be used with a universal receiver.

Battery status and replacement

If, during transmission or duplication, both LEDs blink (red and green), the battery voltage is low due to a very low temperature or flat battery. In the latter case, the remote control shell should be opened (insert a screwdriver in the bottom-left corner) to replace the CR2032 lithium cell inside.

Product look

The remote control is provided with a factory programmed unique code, battery already installed, with a mobile strap, ready to use and 2 years warranty.
Everything is packed in a nice transparent resealable clamshell with multi-language manual.

Companies who'd like to distribute our products can ask for customized instructions with the preferred languages, brand and model name and logo.