- Dettagli
- Categoria: Remote controls
Duplicates several types of remote control for gates, garage doors, barriers, which transmit a fixed code in the frequency 433.92 MHz with OOK/ASK modulation. Each button is independent, so it's possible to clone up to 4 different remote controls, even if made by different manufacturers.
- Dettagli
- Categoria: Remote controls
Light-weight (only 16g), soft-touch cover and long range remote control duplicator 433.92MHz.
- Dettagli
- Categoria: Remote controls
This device is able to duplicate several types of remote control for gates, garage doors, barriers, which transmit in frequencies between 286 and 868 MHz. Each button is independent, so it's possible to clone up to 4 different remote controls, even if they operates in different frequencies.
- Dettagli
- Categoria: Remote controls
Come Creasol Multi , stesso firmware e prezzo, ma leggero (solo 16g), cover soft-touch , trasmette a 433 MHz e 868 MHz .
- Dettagli
- Categoria: Remote controls
Small remote control duplicator, only 41x31x11mm, copy up to 4 different remote controls which transmit a fixed code in one of the supported frequencies, listed in the Tab.1,
- Dettagli
- Categoria: Remote controls
Compact transmitter, 41x31x11mm, can be connected to 1-4 external switches so, when a switch is pressed or released, it starts transmitting.
- Dettagli
- Categoria: Universal receivers
Piccolo dispositivo , 41x31x11mm, che può essere utilizzato per aprire una porta principale o una porta pedonale (con serratura elettrica) utilizzando quasi tutti i radiocomandi in commercio che trasmettono in una frequenza compresa tra 220 MHz e 868 MHz, AM e FM, fissi e codice variabile .
- Dettagli
- Categoria: Universal receivers
Small universal remote control duplicator, only 41x31x11mm, can be used with almost any radio remote control in the market which transmit in a frequency between 288 MHz and 868 MHz, AM and FM, fixed and rolling codes.
- Dettagli
- Categoria: Universal receivers
Multi-frequency universal receiver has 2 optoisolated outputs, with 60V and 30-100mA capability, and can be supplied from 8Vdc to 36Vdc, and from 10Vac to 27Vac.
- Dettagli
- Categoria: Universal receivers
Multi-frequency universal receiver has 2 relay outputs, with 250V and 5A capability, and can be supplied from 9Vdc to 36Vdc, and from 10Vac to 27Vac.
- Dettagli
- Categoria: Antennas
2.1dBi gain, 50Ω impedance, 433-435 MHz band, 10W max. Antenna has LC filter to reduce noise outside 433-435MHz band (narrow bandwidth)
- Dettagli
- Categoria: Antennas
2.1dBi gain, 50Ω impedance, 425-440 MHz band, 10W max
- Dettagli
- Categoria: Antennas
2.1dBi gain, 50Ω impedance, 860-880 MHz band, 10W max
- Dettagli
- Categoria: Batteries
CR2032, 3V LiMnO2 cell, 20mAh, high quality, bulk packing 50pcs/carton
Can be sold with Ecotax already included only for italian customers
Capacity: 20mAh
Dimensions: length 28.5mm, diameter 8mm
- Dettagli
- Categoria: Batteries
CR2032, 3V LiMnO2 cell, 210mAh, blister packing 5pcs/blister, 100pcs/carton
Can be sold with Ecotax already included only for italian customers
Capacity: 210mAh
Dimensions: diameter 20mm, height 3.2mm
- Dettagli
- Categoria: Batteries
CR2032, 3V LiMnO2 cell, 240mAh, very high quality, bulk packing, 40pcs/tray, 480pcs/pack, 4800pcs/carton
Can be sold with Ecotax already included only for italian customers
Capacity: 240mAh
Dimensions: diameter 20mm, height 3.2mm
- Dettagli
- Categoria: Home automation
DomBus1 is the first domotic module of DomBus serie, integrating 6 inputs, 2 relay outputs, 1 AC input.
- Dettagli
- Categoria: Home automation
Creasol DomBus12 è un modulo compatto , 40x30x11mm, con 9 ingressi/uscite configurabili .
Può essere collegato al controllore Domoticz tramite bus seriale RS485 (4 fili, 2 per alimentazione 12/24V e 2 per dati a 115200bps).
Come altri dispositivi DomBus, DomBus12 è progettato per consumare poco, essere affidabile, completamente configurabile e facile da usare . Ogni porta è completamente configurabile, ad esempio come ingresso analogico o digitale, twinbutton (doppio pulsante), contatore, cicalino, NTC 10k, ... 2 porte possono essere utilizzate come uscita open-drain, per attivare 2 relè esterni o LED.
- Dettagli
- Categoria: Home automation
Creasol DomBus23 is a module for home automation system with several different kind of configurable inputs/outputs in a short size: 74x72x24mm.
- Dettagli
- Categoria: Home automation
AVAILABLE IN TWO VERSIONS: DomBus protocol and Modbus protocol!
Creasol DomBus31 is a din-rail relay module, 115x90x40mm, with 8 relays outputs. 6 relays are SPST (Normally Open outputs) with 250V 5A max capability, and 2 relays are SPDT (both Normally Open and Normally Closed outputs) with 10A capability. High efficiency module, with very low power consumption, only 600mW with all relays ON.
- Dettagli
- Categoria: Home automation
DomBus32 is a DIN-RAIL module, 54mm wide, with 3 relay outputs, 3 AC inputs and 5 low-voltage I/Os.
AVAILABLE IN TWO VERSIONS: DomBus protocol and Modbus protocol!
- Dettagli
- Categoria: Home automation
DomBus33 is a DIN-RAIL module, 54mm wide, designed to control an existing lighting system with 3 lights using 115/230V pushbuttons and step-by-step relays.
- Dettagli
- Categoria: Home automation
DomBus34 is a DIN-RAIL module, 54mm wide, designed to interface up to 4 power/energy meters, type DDS 238-2 ZN/S (Modbus), to measure power and energy (both imported and exported), voltage frequency and power factor.
- Dettagli
- Categoria: Home automation
Creasol DomBus36 è un modulo relè di livello industriale su guida din per sistemi di building automation e domotica, 115x90x40mm, con 12 uscite relè, SPST (uscite normalmente aperte) con capacità 250V 5A max, divise in 3 gruppi di 4 relè, ciascun gruppo con a Morsettiere a vite a 5 posizioni: 1 comune + 4 uscite
- Dettagli
- Categoria: Home automation
Modulo domotico su guida DIN, 115x90x40mm, che supporta sia il protocollo DomBus che Modbus RTU , che integra 12 ingressi analogici/digitali a bassa tensione, 3 uscite a relè, 3 ingressi 115Vac / 230Vac . Opzionalmente è in grado di controllare e monitorare l'alimentazione fornita ad una sirena esterna antifurto.
Adatto per interfacciare sensori di allarme (sensori a contatto magnetico, PIR, tamper), monitorare l'interruzione dell'alimentazione (tramite i 3 ingressi AC) e controllare fino a 3 uscite (relè).
- Dettagli
- Categoria: Home automation
Creasol DomBusEVSE è un modulo su guida DIN completamente testato, progettato per Domoticz, Home Assistant, OpenHAB, Node-RED, ioBroker, ... sistemi di automazione domestica, per caricare veicoli elettrici utilizzando lo standard SAE 1772 e IEC 62196 -2 Mode3 (carica CA , fino a 22kW di potenza).
Funziona in modalità stand-alone (con o senza controller domotico) o in modalità gestita (corrente di carica controllata da un controller domotico).
- Dettagli
- Categoria: Home automation
Creasol DomBusTH is a fully configurable small electronic board, 32x17mm, that can fit any blank cover with a 3.5mm hole in the centre, needed by the thermal/humidity sensor to exchange air with the room and to get the 3 LEDs light out. It can be connected to a Domoticz controller using the DomBus protocol, and other contollers (Node-RED, HomeAssistant, OpenHAB, ...) using the standard Modbus protocol by RS485 serial bus (using a standard alarm cable with 4 wires, 2 for 12/24V power supply, and 2 for data at 115200bps). Available in both DomBus and Modbus protocols
- Dettagli
- Categoria: Home automation
ESP8266 is a very powerful and cheap MCU equipped with WiFi transceiver, very useful to expand inputs/outputs of a Raspberry/Domoticz controller.
Creasol DomESP1 board is designed for ESP8266 module NodeMCU V3, with 900 mils header pitch (optionally, soldering additional headers, it's possible to use the 1100mils module or WeMos D1 mini module), and integrates the whole circuitry to manage digital inputs, one analog input, 4 relay outputs, 1 low voltage output, I2C bus, 1wire bus and 2 mosfet outputs with 12A 30Vmax capability.
- Dettagli
- Categoria: Home automation
Creasol DomRelay2 is a compact module, 43x24x25mm, within 2 relays with 12V 200mW coil, 250V 5A SPST contact with special material designed to prevent contact welding due to excessively high surge current load (capacitive loads or tungsten lamps).
Contacts are protected from overvoltage by metal oxide varistors; coils are protected from overvoltage by free-wheeling diodes.
Relay coil should be driven at 12Vdc 17mA: using DomBusTH or DomBus12 modules it's possible to drive relays using a lower power system, consuming less than 1/4 of nominal power.