Creasol SenderBatt: 4 channels stationary transmitter/duplicator

This email contains graphics, so if you don't see them, view it in your browser

Creasol SenderBatt - 4 channels transmitter/duplicator

Connected to 1-4 external switches, transmits a code when external switch is pushed or toggled

Dear Visitor,
we've redesigned our SenderBatt device to fit the new transparent enclosure. Creasol SenderBatt

Now this device, supplied by internal 3V cell CR2032, can be connected to 1÷4 external switches and/or pushbutton switches.
Each channel can be configured to transmit when switch goes ON, OFF, ON and OFF; in the last case, code can be different when switch goes ON or OFF: for example, when connected to a micro-switch applied to a door or window, it transmits a code when door/window get open, and another code when door/window get closed.
It can be used with any automation with a receiver that uses a code format supported by SenderBatt, as like as our universal multifrequency receivers and door opener.
Internal battery life is normally greater than 2 years, and to get a very long battery life it's possible to supply SenderBatt by external 2.4-3V battery.
For any requests, feel free to contact us.
We can supply even small quantities, MOQ 5 pcs.
Also, it's possible to get instructions customized for you, with your preferred languages, logo, product name, ....
Best regards.

Creasol - only creative solutions
Farra di Soligo, Italy
WWW: www.creasol.it/products - MAIL: sales@creasol.it
SKYPE: creasol_psubiaco - Telegram: @creasol_psubiaco

Transmitters and remote control duplicators
Creasol Multi MULTI-FREQUENCY: 433.92, 868.3, 286÷418MHz extra-EU AUTOMATICALLY learn frequency and code G Easy duplication	Creasol MultiST Same features of Creasol Multi, with lightweight casing with soft-touch feeling, and optimized for 433.92 MHz (long range at 433MHz) 4 colors	Creasol Four 433.92 MHz Long range (500m) Nice look, easy duplication.	Creasol Sender MultiFrequency 4-channels duplicator Externally supplied, suitable to be installed into a car, in the fuse box, and controlled by highbeam lever or brake pedal. TX power selectable from short to very long range	Creasol SenderBatt MultiFrequency transmitter/duplicator Supplied by a 3V cell TX power selectable from short to very long range Up to 4 external buttons

Universal multi-frequency receivers
Universal receivers that works with almost every remote control in the market, AM and FM, fixed and rolling codes Supported frequencies: 433.42, 433.92, 434.15, 434.42, 868.3, 868.5, 868.8, 288, 300, 303, 306, 310, 315, 318, 330, 390, 403.55, 418 MHz The user can program 1 or 2 frequencies: for example it's possible to set the receiver to work at 433.92 MHz AM and 868.8 MHz FM.
Creasol UniRec1 1 channel universal receiver Very compact: 29x29x11mm. Can be programmed to work 1 frequency only, or in 2 frequencies simultaneously	Creasol UniRec12 2 channels compact universal receiver Size: 38x28x10mm Can be programmed to work 1 frequency only, or in 2 frequencies simultaneously	Creasol UniRec2 2 relay-outputs (250V 5A) universal receiver Manages up to 60 or 1000 different remote controls, and supports one or more Master remote controls. Wide power supply range and low power consumption/dissipation.	Creasol UniLock Very compact electric lock opener Fits everywhere: 29x29x11mm Only 2 wires, can be installed in less than 10 minutes, and permit to open the main door or gate door or any other system using an electric lock or electric strike plate.

Privacy Policy
We take care about your privacy. Check our Privacy Policy and Terms.
Your data is currently used by Creasol for accounting and for direct marketing; data will be kept for 10 years and will not be transferred to other companies or other countries.
You have the rights to check, modify, cancel or transfer data. For any issue, please contact us at privacy@creasol.it