Prodotti progettati e realizzati da noi.
Prego selezionare la categoria di prodotti nel menu di sinistra.

Ultimo aggiornamento (Martedì 15 Maggio 2012 06:10) Scritto da Webmaster Martedì 17 Maggio 2011 20:01
This device is able to duplicate several types of remote control for gates, garage doors, barriers, which transmit in frequencies between 286 and 868 MHz. Each button is independent, so it's possible to clone up to 4 different remote controls, even if they operates in different frequencies. 
Duplication is very very easy, and do NOT require any external equipment (frequency counter, programming machine, sniffer):
When duplication ends, LED flashes 2 times in case of fixed code, or 4 times in case of rolling code. Then LED becomes green and duplication procedure restart from point 3.
After duplication, each button should be pressed at least 2 times to assure that the gate or garage works correctly.

The remote control emits 2 flashes, then it's possible to initialize a new random code on another button restarting the procedure from point 3.
This feature is useful mainly for 2 reasons:
If, during transmission or duplication, both LEDs blink (red and green), the battery voltage is low: in this case the battery should be flat, or the temperature too low. In the first case, the enclosure should be opened loosening the 2 screws, picking up the board and replacing the existing battery with a new CR2032 battery.

The remote control duplicators is sold in blister, with printed instructions in 6 languages. It's supplied 100% tested and working, with the battery inside, and both snap hook and key ring.
It's possible to customize the instructions with your preferred languages, brand and model name, even for small quantities.
The tables below list the remote controls that are compatible, and the remote controls that are not compatible with this device.
| Company | Frequency | Models | Photo | Supported by: |
| ADYX | 433.920 | ALIZE EM2C, ALIZE EM4C | Multi, Four | |
| AETERNA | 433.920 | TX433 1,2,4 buttons | ![]() |
Multi, Four |
| ALLMATIC | 306.000 | ASMX2, ASMX4 | ![]() |
Multi |
| 433.920 | AEMX1, AEMX2, AEMX4 | ![]() |
Multi, Four | |
| EUROPE AUTO ARMY1, ARMY2, ARMY4 | Multi, Four | |||
| MX1, MX2, MX4 | ![]() |
Multi, Four | ||
| ALLISTER | 318.000 | 9931-318, 9931T-318 | ![]() |
Multi |
| ALLSTAR | 288.000 | 111025 Allister Pulsar Quickcode | Multi | |
| 9921T-288, 9921MT, 9921TK, 9922T-288, 9923T-288, 9931-288, 9931T-288, 9931MT, 9931TK, 9931TK6, 8831T-288, 8832T-288, 8833T-288,8821T-288, 8822T-288, 8823T-288, 8832TK | ![]() |
Multi | ||
| 8833OCS-288 | Multi | |||
| 318.000 | 9921T-318, 9921MT, 9921TK, 9922T-318, 9923T-318, 9931-318, 9931T-318, 9931MT, 9931TK, 9931TK6, 8831T-318, 8832T-318, 8833T-318,8821T-318, 8822T-318, 8823T-318, 8832TK | ![]() |
Multi | |
| 110995 Allister Pulsar Quickcode | Multi | |||
| 8830OCS-318 | Multi | |||
| ALLTRONIK | 433.920 |
S429_1, S429_2, S429_4, S429_M Be sure that your remote operates at 433.92MHz! |
Multi Rev.3, Four Rev.3 |
|
| S425 | Multi Rev.3, Four Rev.3 |
|||
| ANSONIC | 433.920 | SA 434-1E, SA434-2E, SA434-3E, SA434-4E |
Multi, Four | |
| SA 434-1MINI, SA434-2MINI, SA 434-2Midi | Multi, Four | |||
| 868.350 | SA 868-1E, SA 868-2E, SA868-3E, SA868-4E | Multi | ||
| SA 868-1mini/M, SA 868-2mini/M (dip switch version) | Multi | |||
| APERTO | 433.920 | CPS1, CPS2, CPS4 | ![]() |
Multi, Four |
| APRIMATIC | 305.000 | TS1, TS2 | ![]() |
Multi |
| AUTELCO | 286-306 | TX300T | ![]() |
Multi |
| AVIDSEN | 433.920 | 100601 micromark MM23164 | ![]() |
Multi, Four |
| 104505 | ![]() |
Multi, Four | ||
| 100951, 100955, 100550, 100400 | Multi, Four | |||
| B&D BnD BD |
433.920 | 062170/4333EBD, 062171, 4333A | Multi, Four | |
| 062162 | Multi, Four | |||
| PTX4 059120 / 059116 | Multi, Four | |||
| BANDY | 433.920 | ![]() |
Multi, Four | |
| BELFOX | 433.920 | DHS433-1, DHS433-2, DHS433-4, dip switch version | ![]() |
Multi, Four |
| DHS 433,92 (7733), dip switch version | Multi, Four | |||
| 868.350 | DHS 868,3, dipswitch version | Multi | ||
| HS 868-20 | Multi | |||
| BENINCA' | 306.000 | LOT1A, LOT2A, LOT4A | ![]() |
Multi |
| LOTX1A, LOTX2A, LOTX4A | ![]() |
Multi | ||
| LO.TX2PS | ![]() |
Multi | ||
| 433.920 | LOT1W, LOT2W, LOT4W | ![]() |
Multi, Four | |
| LOT2WMS | ![]() |
Multi, Four | ||
| T2WK, T4WK | ![]() |
Multi, Four | ||
| LOTX1W, LOTX2W, LOTX4W | Multi, Four | |||
| TO.GO2WP, TO.GO4WP, TO.GO2WK, TO.GO4WK | Multi, Four | |||
| BESIDE | 433.920 | BEZAP | ![]() |
Multi, Four |
| HIT | ![]() |
Multi, Four | ||
| BETA ELETTRONICA | 315.000 |
BETALARM 6500 |
![]() |
Multi |
| 330.000 | BETALARM 5500 | ![]() |
Multi | |
| BFT | 306.000 | RCS | ![]() |
Multi R3 |
| 315.000 | VTM1, VTM2, VTM4 | ![]() |
Multi | |
| 418.000 | GT01, GT02, GT04 | ![]() |
Multi | |
| 433.920 | TE01, TE02 ( TEO1, TEO2 ) | ![]() |
Multi, Four | |
| TE04 ( TEO4 ) | ![]() |
Multi, Four | ||
| BREDA | 433.920 | Breda TOP432SA | Like CAME TOP432SA, blue | Multi, Four |
| CAME | 315.000 | Came T312M, T314M | Multi | |
| 433.920 | Came T432, T434, TOP432A, TOP434A, TOP432, TOP432NA, TOP434NA, TAM432, TAM434, TAM438 |
![]() |
Multi, Four | |
| Came TOP432M, TOP434M | Multi, Four | |||
| Came TAM432SA | ![]() |
Multi, Four | ||
| Came TOP432SA | ![]() |
Multi, Four | ||
| Came TOP432NA, TOP434NA |
![]() |
Multi, Four | ||
| Came TWIN2, TWIN4 | Multi, Four | |||
| CAME TOP-432EV, TOP-434EV | ![]() |
Multi, Four | ||
| 868.350 | CAME TOP862NA, Came TOP864NA | Multi | ||
| CARDIN | 300.000 | S300 | ![]() |
Multi |
| 310.000 | S301, S302 | ![]() |
Multi | |
| 433.920 | S476 TX2, S476TX4 | ![]() |
Multi, Four | |
| CARPER | 300.000 310.000 318.000 |
C300, C310, C318, C318T | ![]() |
Multi |
|
CASALI |
330.000 | ![]() |
Multi | |
| 433.920 | Genius 433 2, Genius 433 3, JA400 TM433, JA401 TM433 | ![]() |
Multi, Four | |
| CASIT | 306.000 | ERTS92B, ERTS92T | ![]() |
Multi |
| 433.920 | ERTS92B, ERTS92T | ![]() |
Multi, Four | |
| ERTS20DB, ERTS20DQ | ![]() |
Multi, Four | ||
| ERTS476D, ERTS476Q | ![]() |
Multi, Four | ||
| TXS1, TXS2, TXS3, TXS4, TXS6 ERTS97B, ERTS97T |
Multi, Four | |||
| CELINSA | 433.920 | S10 1, S10 2, SAW1, SAW2 | ![]() |
Multi, Four |
| CENTURION | 433.920 | CLASSIC, SMART, SMART2 | ![]() |
Multi, Four |
| CHAMBERLAIN LIFTMASTER MOTORLIFT SEARS CRAFTSMAN |
300.000 | Chamberlain 300MC (multicode) | Multi | |
| 315.000 | 333LM | Multi | ||
| 360LM, 362LM, 363LM | Multi | |||
| 390.000 | 50CB, 53CB, 750CB, 753CB, 50LM, 53LM, 61LM, 62LM, 63LM, 139.53100, 139.53110, 139.53200, 139.53210 | Multi | ||
| 54CB, 756CB, 54LM, 64LM, 859CB | ![]() |
Multi |
||
| 850CB, 853CB, 959CB, 81LM, 82LM, 83LM, 84LM, 99LM |
Multi | |||
| 33LM | Multi | |||
| 418.000 | 4180, 4182, 4183 | Multi | ||
| 4185 | Multi | |||
| 787 remote keyless entry | Multi | |||
| 433.920 | 4330E, 4332E, 4333E | Multi, Four | ||
| 4335E | Multi, Four | |||
| COSTEL | 300.000 | Minitix | Multi | |
| CPS | 433.920 | TCP3, CPS, Jolly 4 | ![]() |
Multi, Four |
| CPS1 TCP3, CPS2 TCP3, CPS4 TCP3 EM1CV, EM2CV, EM4CV |
![]() |
Multi, Four | ||
| DASPI | 433.920 | Daspi Happy2 433, Daspi Pops2 | ![]() |
Multi, Four |
| Daspi Zero2, Zero2CLO, Zero4CLO | Multi, Four | |||
| DEA | 306.000 | 306 1, 306 2, 306 4 | ![]() |
Multi |
| 306 | ![]() |
Multi | ||
| 433.920 | 433 1, 433 2, 433 4, Gold S1, Gold S2 Dea Gold 238 S1, Dea Gold 238 S2, Dea Gold 239 S4 |
![]() |
Multi, Four | |
| Genie | ![]() |
Multi, Four | ||
| Punto S2 | ![]() |
Multi, Four | ||
| Dea MIO TD2, MIO TD4 | Multi, Four | |||
| DELMA | 300.000 | Apollo 300, ELSAMEC Apollo 300 | ![]() |
Multi |
| Mizard 300 1, Mizard 300 2, King | ![]() |
Multi | ||
| 433.920 | Mizard 433 1, Mizard 433 2 | ![]() |
Multi, Four | |
| King 433 2 | ![]() |
Multi, Four | ||
| Style Copy 2CH (this is a code duplicator) | Multi, Four | |||
| DICKERT | 433.920 | MAHS433 01, MAHS433 04 Note: we can NOT guarantee that it can be duplicated, because it depends by the receiver. |
![]() |
Multi, Four |
| S10-433A1L00, S10-433A4L00, S20-433A1L00, S20-433A4L00, S20-433A1000, S20-433A4000 Note: only RED buttons model can be duplicated! |
![]() |
Multi, Four | ||
|
S5-433-A2L00, S5U-433-A2L00 |
![]() |
Multi, Four | ||
| 868.350 | HS868-21 Note: only RED buttons model can be duplicated! |
![]() |
Multi | |
|
S5-868A2L00, S5U-868A2L00 |
![]() |
Multi | ||
| S10-868A100, S10-868A400, S20-868A1L00, S20-868A4L00, S20-868A1000, S20-868A4000 Note: only RED buttons model can be duplicated! |
![]() |
Multi | ||
| DIGICODE | 300.000 310.000 |
DC5010, DC5012, DC5030, DC5032, DC5040, DC5042, DC5060, DC5062, DC5070, DC5072 | ![]() |
Multi |
| DITEC | 433.920 | GOL4C | ![]() |
Multi, Four |
|
GOL4 |
![]() |
Multi, Four | ||
|
BIX LS2, BIX LP2, BIX LG4 |
![]() |
Multi, Four | ||
| DOITRAND FDOITRAND |
433.920 | MPSTF2E JAUNE, MPSTF4E, HYPERPHONE MPSTF2E_GRISE | ![]() |
Multi, Four |
| TS2DE, TS4DE | ![]() |
Multi, Four | ||
| DOORHAN | 433.920 | Multi, Four | ||
| DOORMATIC | 433.920 | SAW | ![]() |
Multi, Four |
|
DUCATI |
433.920 | TSAW1, TSAW2, TSAW3, TSAW4, 124 ELBER TSAW1, TSAW2, TSAW3, TSAW4 RONDY TSAW1, RONDY TSAW2, RONDY TSAW3 |
![]() |
Multi, Four |
| TPR10-A, TPR20-A RONDY TPR10_A, RONDY TPR20_A |
![]() |
Multi, Four | ||
| TE2 | ![]() |
Multi, Four | ||
| HC6203, 6203: only blue with transparent buttons, and transparent with transparent buttons |
![]() |
Multi, Four | ||
| ECP | 292.000 |
FIX 292 MHz F105611 | ![]() |
Multi |
| KEY 292 MHz F106038 | ![]() |
Multi | ||
| ELBE | 433.920 | 501, 502, 504 | ![]() |
Multi, Four |
| 502a, 504a | ![]() |
Multi, Four | ||
| 502, 504 | ![]() |
Multi, Four | ||
| ELCA | 300.000 | Aster 1100, Aster 1101 | ![]() |
Multi |
| 433.920 |
IRIS, IRIS 9CH. Model 433D only! |
![]() |
Multi, Four | |
| ASTER2 | ![]() |
Multi, Four | ||
| Aster 1000, Aster1001. Model 433D only! Colors: black, blue, light grey |
![]() |
Multi, Four | ||
| GEMINI 9CH | Multi, Four | |||
| VIRGO | ![]() |
Multi, Four | ||
| ELEK | 300.000 | KTM194B | ![]() |
Multi |
| KTR4 | ![]() |
Multi | ||
| ELV CONRAD |
868.350 | FS20 S4, FS20 S8, FS20 S8-2, FS20 S16, FS20S16R, FS20 S20-2, FS20 S20-3 | ![]() |
Multi Rev.4 |
| ELVOX | 433.920 | Elvox ET | Multi, Four | |
| Elvox ET03, ET04 | Multi, Four | |||
| 868.350 | Elvox ET08 | Multi | ||
EMFA |
287.000 | ET1, ET2, ET3 | ![]() |
Multi |
| 308.000 | ES_1, ES_2 | ![]() |
Multi | |
| ERONE | 433.920 | SETDS39433E2, SETDS39433E4 | Multi, Four | |
| ERREKA | 289.000 | Erreka E20, Erreka E22 | ![]() |
Multi |
| 433.920 | Erreka Luna, Erreka SMAT 1 RESON 1, RESON 2, RESON 3 | ![]() |
Multi, Four | |
| EUROPE AUTOMATISMES | 306.000 | ASMY1, ASMY2, ASMY4 | Multi | |
| 433.920 | ARMY1, ARMY2, ARMY4 | Multi, Four | ||
| S1, S2, S3 | Multi, Four | |||
| FAAC | 300.000 |
TM300S, TM300S05 H |
![]() |
Multi |
| 315.000 | T1, T2, T3 Faac TM1 315, TM2 315, TM3 315 |
![]() |
Multi | |
| 330.000 | TM1, TM2, TM3 Faac TM1 330, TM2 330, TM3 330 |
![]() |
Multi | |
| 418.000 | TM1 418 DS, TM2 418 DS, TM3 418 DS | ![]() |
Multi |
|
| TM 418SL, TM1 418SL, TM2 418 SL, TM3 418SL | ![]() |
Multi | ||
| 433.920 | TM1 433 DS, TM2 433 DS, TM3 433 DS TM1 433DS DPH, TM2 433DS DPH, TM3 433DS DPH |
![]() |
Multi, Four | |
| TML2 433 SLR, TML4 433 SLR, TML2-433-SLR, TML4-433-SLR, TML2 433 ESL, TML4 433 ESL |
![]() |
Multi, Four |
||
| TML2 433 SLP, TML4 433 SLP, TML2-433-SLP, TML4-433-SLP | Multi, Four | |||
| 868.350 | TM1 868 DS, TM2 868 DS, TM3 868 DS TM1 868DS DPH, TM2 868DS DPH, TM3 868DS DPH |
![]() |
Multi | |
|
FADINI BPT |
315.000 | ASTRO75-1, ASTRO75-2, ASTRO75-4 | ![]() |
Multi |
| 433.920 | 433 2M, Astro43_2m | ![]() |
Multi, Four | |
| Astro433-2, Astro433-4, Astro43-2, Astro43-4 | ![]() |
Multi, Four | ||
| FERPORT | 433.920 | Tac1, Tac2, Tac4, Tac1k, Tac2k, Tac4k, Tac2kr | ![]() |
Multi, Four |
|
FUNKMODUL ELSECO |
433.920 | T433A2K1, T433A2K2 | Multi, Four | |
| T433A2K4, T433A2K4n | Multi, Four | |||
| GIBIDI | 306.000 | TS2M | ![]() |
Multi |
| 433.920 | Open TMB 433, OPEN TMQ 433, OPEN OUT 2, OPEN OUT 4 | ![]() |
Multi, Four | |
| GOBBATO | 306.000 | T306 | ![]() |
Multi |
| GRIFFON | 403.55 | Griffon 404 MHz dip switch remotes and duplicating remotes | ![]() |
Multi |
| 433.92 | Griffon 433 MHz dip switch remotes and duplicating remotes | ![]() |
Multi, Four | |
| GTO | 318.000 | GTO Mighty Mule 1/2 buttons, RB741, RB742 | ![]() |
Multi |
| GTO Mighty Mule 3 buttons, RB743 | ![]() |
Multi | ||
| GULLIVER | 306.000 | MDRQ 306 | ![]() |
Multi |
| 433.920 | MDW 2E | ![]() |
Multi, Four | |
| HAUSS | 433.920 | Pocket 3750-1, Pocket3750-2, Pocket 3750-4 | Multi, Four | |
| HEDDOF | 318.000 | P219-1, P219-2 | ![]() |
Multi |
| P220-1, P220-2, P220-3 | ![]() |
Multi | ||
| HORMANN HOERMANN |
433.920 |
HSM2, HSM4, yellow buttons Please note that, in Netherlands, Hoermann sell this kind of remote control which transmit a rolling code: in this case it cannot be duplicated! |
![]() |
Multi, Four |
| 868.300 | HS1, HS2, HS4, blue buttons |
|
Multi | |
| HSD2 | Multi | |||
| HSE2, HSE4, blue buttons | Multi | |||
| HSM2, HSM4, blue buttons | ![]() |
Multi | ||
| HSP4, blue buttons | ![]() |
Multi | ||
| HSS2, HSS4, blue buttons | Multi | |||
| HSZ1-868, HSZ2-868 | ![]() |
Multi | ||
| HRC | 433.920 | Multi, Four | ||
| JAY | 433.920 | UBEI x1 SL1 | ![]() |
Multi, Four |
| UBET 11, UBET 21, UBET 31, UBET 41, UBET 61Â | ![]() |
Multi, Four | ||
| JCM | 290.000 | EC1, EC2, EC3, ET1, ET2, ET3 | ![]() |
Multi |
| KEY AUTOMATION | 433.920 | 900TXB-42, 900TXB-42N, 900TXP-42, 900TXP-42N | ![]() |
Multi, Four |
| 900TXB-44, 900TXG-44 | Multi, Four | |||
| 900SUB-44, 900SUB-44N, 900SUB-44W, 900SUB-44WN | Multi, Four |
|||
| 900TXK-42, 900TXW-42,900TXK-44, 900TXW-44 | ![]() |
Multi, Four | ||
| KING | 433.920 | Note: receiver should be setup withrolling code feature disabled | Multi, Four | |
| LABEL IUPPITER |
306.000 | MDR, IUPPITER 306 | ![]() |
Multi |
| 433.920 | RJW/1E, RJW/2E, RJW/4E, RJW/12E | ![]() |
Multi, Four | |
| MDW/1E, MDW/2E | ![]() |
Multi, Four | ||
| LEB | 306.000 | TSA4 | ![]() |
Multi |
| 433.920 | TMW | ![]() |
Multi, Four | |
| TSAW2N, TSAW4N | ![]() |
Multi, Four | ||
| TCP3Â (this is a code duplicator) | Multi, Four | |||
| TRK4 Note: receiver should be configured to disable rolling check. | ![]() |
Multi, Four | ||
| TPW4 | ![]() |
Multi, Four | ||
| 868.300 | TPK4 | ![]() |
Multi | |
| LINCE | 302.000 | LE TX1, LE TX2 | Multi | |
| 433.920 | LR 2035 | Multi, Four | ||
| LINEAR |
300.000 |
MULTI-CODE 308911, 308913, 1089 | ![]() |
Multi |
| MULTI-CODE 412001, 414001, 109410, 109710 | Multi | |||
| MULTICODE 306010, 307010, 108210 | ![]() |
Multi | ||
| MULTI-CODE 308301, 308302 | Multi | |||
| MULTI-CODE 105015 | ![]() |
Multi | ||
| 310.000 | Delta3 Moore-o-Matic: DT, DT2, DT2A, DT22A, DTC, DTD |
![]() |
Multi |
|
| Delta 3 Moore-o-Matic: DT3, DT4 | Multi | |||
| Delta 3 Moore-o-Matic: Mini-T LB "LadyBug" | ![]() |
Multi | ||
| 312.000 | Delta3 DTK (canada) | ![]() |
Multi | |
| MA SYSTEM | 433.920 | MA TX1, MA TX2, MA TX3 | ![]() |
Multi, Four |
| MARANTEC | 418.000 | D212, D222, D232 | Multi | |
| 433.920 | D101 | ![]() |
Multi, Four | |
| D12 | ![]() |
Multi, Four | ||
| D212, D222, D232 | Multi, Four | |||
| Digital 302, D302 | ![]() |
Multi Rev.4, Four Rev.4 |
||
| Digital 304, D304 | ![]() |
Multi Rev.4, Four Rev.4 |
||
| 868.300 | Digital 302, D302 | ![]() |
Multi Rev.4 Rev.4 |
|
| Digital 304, D304 | ![]() |
Multi Rev.4 Rev.4 |
||
| MCZ | 433.920 | Aster | Multi, Four | |
| MEIßNER MEISSNER |
433.920 | LW433-1, LW433-2, LW433-4 | Multi, Four | |
| Pocket 3750 1, 2, 4 | Multi, Four | |||
| MONSEIGNEUR | 433.920 | ARC2, ARC4 | ![]() |
Multi, Four |
| TDR 400 3845, TDR 400 3846, TDR 400 3847 T1SAW433, T2SAW433, T4SAW433 |
![]() |
Multi, Four | ||
|
MOTORLINE |
433.920 | MX1, MX2, MX3, MX4, MX6 MX11, MX12, MX13 |
![]() |
Multi, Four |
| MOTOSTAR | 433.920 | CLIKSTAR2, CLICKSTAR4 CLICK-4M, CLICKSTAR RE 532, CLICKSTAR RE 534 |
Multi, Four | |
| NICE | 306.000 | EASY S1, S2, S4 | ![]() |
Multi |
| 433.920 | FLO1, FLO2, FLO4 | ![]() |
Multi, Four | |
| VERY VE | Multi, Four | |||
| NOLOGO | 306.000 | ![]() |
Multi | |
| 433.920 | ECO DIP | ![]() |
Multi, Four | |
| NOVOTECNICA | 306.000 | BIT N1, BIT N2 | Multi | |
| BIT NT1, BIT NT2, BIT NT4 | Multi | |||
| OG | 433.920 | OG62, OG64 | ![]() |
Multi, Four |
| O&O OeO, O and O |
306.000 | O and O TX02 | Multi | |
| 433.920 | OeO T-COM DS 4-2, O&O T-COM DS 4-4 | Multi, Four | ||
| OPENOUT | 306.000 | TS2M | ![]() |
Multi |
| 433.920 | TMQ 433 2, TMQ 433 4 | ![]() |
Multi, Four | |
| PIAZZETTA | 433.920 | 4 buttons for wood/pellet heater | Multi, Four | |
| PORTAMATIC | 433.920 | MPH01, MPH02 | ![]() |
Multi, Four |
|
POWERFIX Profi |
433.920 | RCB-A 3600R | Multi, Four | |
| PRASTEL | 306.000 | NCSMT1, NCSMT2P, NCSMT4P | ![]() |
Multi |
| KMFT2P, KMFT4P, KMFT2P93, KMFT4P93 | ![]() |
Multi | ||
| 433.920 | MPSTF2E, MPSTF4E | ![]() |
Multi, Four | |
| PROEM | 433.920 | ER2C4ACM, ER4C4ACM | Multi, Four | |
| PROGET | 433.920 | ETY_433N2, ETY 433N4 | ![]() |
Multi, Four |
| EMI433-N2 | ![]() |
Multi, Four | ||
| PROTECO | 433.920 | TX433 | ![]() |
Multi, Four |
| EUROMATIC | ![]() |
Multi, Four | ||
| HIT | ![]() |
Multi, Four | ||
| PUJOL | 288.000 | JCM TRINARIO 1, TRINARIO 2, TRINARIO 3 | ![]() |
Multi |
| 288.000 | TT1, TT2, TRINARIO 1, TRINARIO 2 | ![]() |
Multi | |
| PULSAR | 318.000 | 9931-318, 9931T-318 | ![]() |
Multi |
| QUASAR | 287.000 | Tx SA4, Serie Argento, SA |
|
Multi |
| 287.000 | TXSA2T | ![]() |
Multi | |
| 306.000 | 300 2, 300 4 | ![]() |
Multi | |
| 433.920 | 433 TANGO SLIM BLEU | ![]() |
Multi, Four | |
| QUICK | 433.92 | Model: 302 | Multi |
|
| RADIODIGIT | 291.000 | TBM, TCM | Multi | |
| ROGER | 433.920 | R80/TX12, R80/TX14, R80/TX12R, R80/TX14R | Multi, Four | |
| H80/TX22 | ![]() |
|||
| G80/TX32, G80/TX34, G80/TX32R, G80/TX34R | ||||
| SEA |
433.920 | ![]() |
Multi, Four | |
| SMART433_TX2_DIP, SMART433_TX3_DIP SMART433_TX2_COPY,SMART433_TX3_COPY Smart2 Dip Switch, Smart3 Dip Switch |
![]() |
Multi, Four | ||
| 868.350 | 231103, SEA868_4 | ![]() |
Multi | |
| 231103, Head2 Dip Switch | ![]() |
Multi | ||
| SMART868-TX2-DIP, SMART868-TX3-DIP Smart2 Dip Switch, Smart3 Dip Switch |
![]() |
Multi | ||
| SEAV | 306/330 |
TX1, TX2, TX3, TX4, TX1/330 |
![]() |
Multi |
| 433.920 | TXS1, TXS2, TXS3, TXS4 | ![]() |
Multi, Four | |
| Behappy S1, Behappy S2, Behappy S3 | Multi, Four | |||
| Be Easy TX, Be Easy Murale2 | ![]() |
Multi, Four | ||
| BeSmart S2, BeSmart S4 | Multi, Four | |||
| BeFree S1 | Multi, Four | |||
| 868.300 | BeSmart H2, BeSmart H4 | Multi | ||
| BeFree H1 | Multi | |||
| SECURVERA | 433.920 | SV R2C | ![]() |
Multi, Four |
| SV R2C | ![]() |
Multi, Four | ||
| SV R4C | ![]() |
Multi, Four | ||
| SV R6C | ![]() |
Multi, Four | ||
| SENDER | 433.920 | Multi, Four | ||
|
SENTRY MARTIN ELECTRONICS |
403.550 | SENTRY binary, SENTRY trinary |
s |
Multi |
| 433.920 | SENTRY binary | Multi, Four | ||
| SERAI | 310.000 | OG/32 | ![]() |
Multi |
| 433.920 | OG/52, OG/54, OG/82, OG/84 | ![]() |
Multi, Four | |
| OG/28, OG/48, OG/62, OG/64 | ![]() |
Multi, Four | ||
| OG/02, OG/04 | ![]() |
Multi, Four | ||
| SICE | 433.920 | TX4 CLACK Bigfoot | ![]() |
Multi, Four |
| SILVELOX - INTRA | 306.000 | Green case with black buttons | ![]() |
Multi |
| 433.920 | Silvelox Intra HSM4 | ![]() |
Multi, Four | |
| SIMBA | 433.920 | Simba RC1 | Multi, Four | |
| SIMINOR | 433.920 | ER2C4ACM, ER4C4ACM, ER2C4ACS, ER4C4ACS |
Multi, Four | |
| SKYLINK |
300.000 |
MultiLink SD300M, Skylink 100, LD310M, SD310M |
![]() |
Multi |
| 318.000 | Skylink Mltilink PD-318M | ![]() |
Multi | |
| 390.000 | Multilink CB-390M, CD-390M (versions compatible with Chamberlain) |
![]() |
Multi | |
| SMD | 433.920 | LW433-1, LW433-2, LW433-4 : AM models only | Multi, Four | |
| SOMFY | 433.920 | LEB TMW | ![]() |
Multi, Four |
| SPARKRITE | ? | SRA2-2 | ![]() |
Multi |
| STAGNOLI | 433.920 | ZEUS AZTR | ![]() |
Multi, Four |
| 868.350 | ZEUS AZTR | ![]() |
Multi | |
| STANLEY | 310.000 | 24286 | ![]() |
Multi |
| 1082 | ![]() |
Multi | ||
| 1050 | ![]() |
Multi | ||
| 1094 | Multi | |||
| 1097 | ![]() |
Multi | ||
| STARTEC | 433.920 | TXQ2 | ![]() |
Multi, Four |
| STINGER | 300.000 310.000 318.000 390.000 |
300MCD21V, 300MCD22V 310MCD21V, 310LID21V, 310LID22V 318ALD31V 390LMD21V, 390LMPB1V |
diff. colors |
Multi |
| TAU | 315.000 | 250 TXA2, 250 TXA4 | ![]() |
Multi |
| 433.920 | 250 SLIM, 250K-SLIM, 250K-SLIMC | ![]() |
Multi, Four | |
| 250TXD2, 250TXD4 | ![]() |
Multi, Four | ||
| 250BUG2, 250BUG4 | ![]() |
Multi, Four | ||
| 250T-4, 250T-4C | Multi, Four | |||
| TEC KEY | 300.000 | MK1010 | ![]() |
Multi |
| TECNOMATIC | 433.920 | TQ433 | Multi, Four | |
| TEDSEN BERNER GFA Elektromaten |
433.920 | SKX1MD, SKX2MD, SKX3MD, SKX4MD | ![]() |
Multi, Four |
| SKX1KD, SKX2KD, SKX4KD, SKX6KD | Multi, Four | |||
| SKX1DL, SKX2DL, SKX3DL, SKX4DL | ![]() |
Multi, Four | ||
| SKX1LC, SKX2LC, SKX3LC, SKX4LC | Multi, Four | |||
| SKX1SL, SKX2SL, SKX3SL, SKX4SL | Multi, Four | |||
| SKJ | ![]() |
Multi, Four | ||
| SKX1WD, SKX2WD, SKX4WD, SKX11WD, SKX22WD, SKX44WD | ![]() |
Multi, Four | ||
| TELCOMA | 306.000 | RCS TP2 | ![]() |
Multi Rev.4 |
| RCST2, RCST4 | Multi Rev.4 |
|||
| 433.920 | Telcoma EDGE 2, Telcoma EDGE 4 | Multi, Four | ||
| TANGO 2 SW, TANGO4 SW | ![]() |
Multi, Four | ||
| TANGO BLUE 2, TANGO 4 BLUE, TANGO BLEU 2, TANGO BLEU 4 | Multi, Four | |||
| TANGO 2 N, TANGO 4 N | Multi, Four |
|||
| TANGO 2 SLIM, TANGO 4 SLIM | ![]() |
Multi, Four | ||
| Telcoma Noire2, Noire4 Note: Rolling-code jumper should be removed from the receiver! |
Multi, Four |
|||
| TANGO WIN3 | ![]() |
Multi, Four | ||
| TANGO2, TANGO4 | Multi, Four | |||
| TELEMATIC | 300.000 | TL1, TL2 | ![]() |
Multi |
| TKC | 433.920 | TSAW433 | ![]() |
Multi, Four |
| TONKARR | 287.000 | TK2 | ![]() |
Multi |
| TORAG | 433.920 | S429 1, S429 2, S429 4 | ![]() |
Multi, Four |
| TORMATIC DORMA |
433.920 | HS, Dorma HS43 1E, HS43 2E, HS43 3E, HS43 4E | ![]() |
Multi, Four |
| MAHS, Siebau, Novoferm, Dorma | ![]() |
Multi, Four | ||
| MHS, MHS43-1 | ![]() |
Multi, Four | ||
| TREMA | 433.920 | TO93TV1, TO93TV2, TO93TV4 | ![]() |
Multi, Four |
| TUBAUTO | 433.920 | DIGITAL 101 433 | ![]() |
Multi, Four |
| V2 | 306.000 | TRR1_306 |
![]() |
Multi |
| 318.000 | TPS1K | ![]() |
Multi | |
| 433.920 |
PHOENIX series: Phoenix2, Phoenix2P, Phoenix4, Phoenix4P, TXC2 Contr.47, TXC4 Contr.47, Handy2 Contr.47, Handy4 Contr.47, TRC4 Contr.47, TSC4 Contr.47 . |
|
Multi, Four | |
| TCP3 | ![]() |
Multi, Four | ||
| TCP3, ARC3 | ![]() |
Multi, Four | ||
| TCP3 | ![]() |
Multi, Four | ||
| TPR | ![]() |
Multi, Four | ||
| T1SAW/433, T2SAW/433, T4SAW/433 | ![]() |
Multi, Four | ||
| TRR1, TRR2, TRR4 | ![]() |
Multi, Four | ||
| PMR2, PMR4 | ![]() |
Multi, Four | ||
| 868.300 | PHOENIX series: Phoenix2-868, Phoenix2P-868, Phoenix4-868, Phoenix4P-868. Note:the receiver should be programmed with the rolling code feature disabled. When the code is learned, LED will blink for 6 times to highlight that the code is rolling. |
![]() |
Multi | |
| VISONIC | 315.000 | WT100, WT100A, WT101, WT101A, WT102, WT104,WT-201, WT-201A, WT-201WP, WT-201AWP | ![]() |
Multi |
| 418.000 | WT-100, WT-100A, WT-101, WT-101A, WT-102, WT-104,WT-201, WT-201A, WT-201WP, WT-201AWP | Multi | ||
| 433.920 | WT 100, WT 100A, WT 101, WT 101A, WT 102, WT 104,WT 201, WT 201A, WT 201WP, WT 201AWP | Multi, Four | ||
| VSEG | 433.920 | CR SLIM | Multi, Four | |
| VISA ELECTRONICS | 306.000 | VISA VRK 4021A | Multi | |
| 433.920 | Visa Beet 1, Visa Skippy | Multi | ||
| WAINE-DALTON | 433.920 | S429-1, S429-2, S429-4, S429-mini | Multi, Four | |
| S425 | Multi, Four | |||
|
WECLA |
433.920 | 433, 433_2 | ![]() |
Multi, Four |
| ZULLAN | 315.000 | 250TXA1H, 250TXA2H, 250TXA4H | ![]() |
Multi |
| OEM | 315.000 |
|
![]() |
Multi |
Our products MULTI and FOUR cannot duplicate remote controls which transmits below 286 MHz (for example 27, 30, 40 MHz remote controls). The following table lists some remote controls that are known to be not compatible.
| Company | Frequency | Models | Photo | Notes |
| ALLMATIC | 433.920 | TECH3, BRO | Several different enclosures |
Rolling code |
| APERTO | 434.420 | TX02-434-2 | ![]() |
Rolling code |
| AVIDSEN | 433.920 | TOV | ![]() |
Rolling code |
| B&D | 433.920 | 062170/4333EBD 1A4982 | ![]() |
10 trinary |
| BFT | 433.920 | MITTO2, MITTO4 | ![]() |
Rolling code |
| CARDIN | 433.920 | S435 | Rolling code | |
| S438, S449 | FM / FSK |
|||
| 868.300 | S486 | FM / FSK | ||
|
CHAMBERLAIN |
433.920 |
84335eml, 94335e |
Rolling code |
|
| DICKERT |
433.920 |
S5-433-A2K00, S5U-433-A2K00, S10-433A1K00, S10-433A4K00, S20-433A1K00, S20-433A4K00, HS868-50 roltek, S5-868A2K00, S5U-868A2K00, S10-868A1K00, S10-868A4K00, S20-868A1K00, S20-868A4K00 |
![]() |
Rolling code |
| DUCATI ALLDUCKS |
433.920 | 6203/R, 6203/P, 6204 | Several different enclosures |
Rolling code |
| EAZYMATIC | 218.000 | 218 MHz | ||
| FAAC | 868.300 | TML2868SLH | Rolling code | |
| XT2868SLH, XT4868SLH | ![]() |
Rolling code | ||
| FADINI | 868.350 | BIRIO | Rolling code, programmed by palm | |
|
GENIUS |
868.350 | AMIGO JA332, AMIGO JA334 | ![]() |
Rolling code |
| GLIDEROL | 868.350 | TM-868C | Rolling code (KeeLoq) | |
| HORMANN HOERMANN |
29-40MHz | Models with green or grey buttons | Cannot be duplicated | |
| 433.920 | RS2-433, RS4-433 (Rolling code versions, usually sold in Netherlands) |
Rolling code (KeeLoq) |
||
| MHOUSE | 433.920 | TX3, TX4 | Rolling code | |
| NICE | 30-40 | BT1K, BT2K, BT4K, K1M, K2M, K4M | Several different enclosures |
30-40MHz |
| 433.920 | SMILO SM2, SM4 | ![]() |
Rolling code | |
| FLO1R-S, FLO2R-S, FLO4R-S | ![]() |
Rolling code | ||
|
NORMSTAHL |
433.920 | EA433 | ![]() |
Rolling code |
| NOVOFERM | 433.920 | MNHS433, NOVOTRON 502,504 | Rolling code | |
| PROEM / SIMINOR | 433.920 | ER2C4ACM, ER4C4ACM, ER2C4ACS, ER4C4ACS | ![]() |
Rolling code |
| PRASTEL | 433.920 | MPSTP2E,MPSDT2E, MT2E, MT4E, | Rolling code | |
| PUJOL | 433.920 | P215/4, VARIO | ![]() |
Rolling code |
| RIB | 312.000 | 312A | ||
| 433.920 | 433 | |||
| SKYLINK | 433.920 | R3 serie | Rolling code | |
| SOMFY | 433.420 | Keytis NS 2 RTS, Keytis NS 4 RTS | ![]() |
Rolling code |
| SOMMER | 868.800 | TX03 868 04 | Rolling code | |
| TELECO | 433.920 | TXP, TXR, TXV, TXW, TVT series | Rolling code | |
| TELE RADIO | 433 - 868 | Tele radio T60 series | FM | |
| WELLER | 868.500 | MT87A, MT87A4 | ![]() |
Rolling code |
Extended support for Marantec Digital (some codes cannot be learned before).
Add new code: FS20 protocol, used for domotic / home automation
Longer time before entering learning mode (buttons 1+2 should be pressed for 1s, now)
BugFix on the management of certain TELCOMA RCS and BFT RCS remote controls, operating at 306 MHz.
New remote control Alltronik S425.
Ultimo aggiornamento (Martedì 15 Maggio 2012 06:07) Scritto da Webmaster Martedì 17 Maggio 2011 20:01

This device is able to duplicate several types of remote control for gates, garage doors, barriers, which transmit in the frequency 433.92 MHz with OOK/ASK modulation. Each button is independent, so it's possible to clone up to 4 different remote controls, even if made by different manufacturers.
Duplication is very very easy, and do NOT require any external equipment (frequency counter, programming machine, sniffer):
When duplication ends, LED flashes 2 times in case of fixed code, or 4 times in case of rolling code. Then LED becomes green and duplication procedure restart from point 3.
After duplication, each button should be pressed at least 2 times to assure that the gate or garage works correctly.
The remote control emits 2 flashes, then it's possible to initialize a new random code on another button restarting the procedure from point 3.
This feature is useful mainly for two reasons:
If, during transmission or duplication, both LEDs blink (red and green), the battery voltage is low: in this case the battery should be flat, or the temperature too low. In the first case, the enclosure should be opened loosening the 2 screws, picking up the board and replacing the existing battery with a new 27A alkaline battery (12V 20mAh).
The remote control duplicators is sold in blister, with printed instructions in many languages. It's supplied 100% tested and working, with the battery inside, and both snap hook and key ring.
Instructions can be customize with the preferred languages, brand and model name, logos, even for small quantities.
The tables below list the remote controls that are compatible, and the remote controls that are not compatible with this device.
| Company | Frequency | Models | Photo | Supported by: |
| ADYX | 433.920 | ALIZE EM2C, ALIZE EM4C | Multi, Four | |
| AETERNA | 433.920 | TX433 1,2,4 buttons | ![]() |
Multi, Four |
| ALLMATIC | 306.000 | ASMX2, ASMX4 | ![]() |
Multi |
| 433.920 | AEMX1, AEMX2, AEMX4 | ![]() |
Multi, Four | |
| EUROPE AUTO ARMY1, ARMY2, ARMY4 | Multi, Four | |||
| MX1, MX2, MX4 | ![]() |
Multi, Four | ||
| ALLISTER | 318.000 | 9931-318, 9931T-318 | ![]() |
Multi |
| ALLSTAR | 288.000 | 111025 Allister Pulsar Quickcode | Multi | |
| 9921T-288, 9921MT, 9921TK, 9922T-288, 9923T-288, 9931-288, 9931T-288, 9931MT, 9931TK, 9931TK6, 8831T-288, 8832T-288, 8833T-288,8821T-288, 8822T-288, 8823T-288, 8832TK | ![]() |
Multi | ||
| 8833OCS-288 | Multi | |||
| 318.000 | 9921T-318, 9921MT, 9921TK, 9922T-318, 9923T-318, 9931-318, 9931T-318, 9931MT, 9931TK, 9931TK6, 8831T-318, 8832T-318, 8833T-318,8821T-318, 8822T-318, 8823T-318, 8832TK | ![]() |
Multi | |
| 110995 Allister Pulsar Quickcode | Multi | |||
| 8830OCS-318 | Multi | |||
| ALLTRONIK | 433.920 |
S429_1, S429_2, S429_4, S429_M Be sure that your remote operates at 433.92MHz! |
Multi Rev.3, Four Rev.3 |
|
| S425 | Multi Rev.3, Four Rev.3 |
|||
| ANSONIC | 433.920 | SA 434-1E, SA434-2E, SA434-3E, SA434-4E |
Multi, Four | |
| SA 434-1MINI, SA434-2MINI, SA 434-2Midi | Multi, Four | |||
| 868.350 | SA 868-1E, SA 868-2E, SA868-3E, SA868-4E | Multi | ||
| SA 868-1mini/M, SA 868-2mini/M (dip switch version) | Multi | |||
| APERTO | 433.920 | CPS1, CPS2, CPS4 | ![]() |
Multi, Four |
| APRIMATIC | 305.000 | TS1, TS2 | ![]() |
Multi |
| AUTELCO | 286-306 | TX300T | ![]() |
Multi |
| AVIDSEN | 433.920 | 100601 micromark MM23164 | ![]() |
Multi, Four |
| 104505 | ![]() |
Multi, Four | ||
| 100951, 100955, 100550, 100400 | Multi, Four | |||
| B&D BnD BD |
433.920 | 062170/4333EBD, 062171, 4333A | Multi, Four | |
| 062162 | Multi, Four | |||
| PTX4 059120 / 059116 | Multi, Four | |||
| BANDY | 433.920 | ![]() |
Multi, Four | |
| BELFOX | 433.920 | DHS433-1, DHS433-2, DHS433-4, dip switch version | ![]() |
Multi, Four |
| DHS 433,92 (7733), dip switch version | Multi, Four | |||
| 868.350 | DHS 868,3, dipswitch version | Multi | ||
| HS 868-20 | Multi | |||
| BENINCA' | 306.000 | LOT1A, LOT2A, LOT4A | ![]() |
Multi |
| LOTX1A, LOTX2A, LOTX4A | ![]() |
Multi | ||
| LO.TX2PS | ![]() |
Multi | ||
| 433.920 | LOT1W, LOT2W, LOT4W | ![]() |
Multi, Four | |
| LOT2WMS | ![]() |
Multi, Four | ||
| T2WK, T4WK | ![]() |
Multi, Four | ||
| LOTX1W, LOTX2W, LOTX4W | Multi, Four | |||
| TO.GO2WP, TO.GO4WP, TO.GO2WK, TO.GO4WK | Multi, Four | |||
| BESIDE | 433.920 | BEZAP | ![]() |
Multi, Four |
| HIT | ![]() |
Multi, Four | ||
| BETA ELETTRONICA | 315.000 |
BETALARM 6500 |
![]() |
Multi |
| 330.000 | BETALARM 5500 | ![]() |
Multi | |
| BFT | 306.000 | RCS | ![]() |
Multi R3 |
| 315.000 | VTM1, VTM2, VTM4 | ![]() |
Multi | |
| 418.000 | GT01, GT02, GT04 | ![]() |
Multi | |
| 433.920 | TE01, TE02 ( TEO1, TEO2 ) | ![]() |
Multi, Four | |
| TE04 ( TEO4 ) | ![]() |
Multi, Four | ||
| BREDA | 433.920 | Breda TOP432SA | Like CAME TOP432SA, blue | Multi, Four |
| CAME | 315.000 | Came T312M, T314M | Multi | |
| 433.920 | Came T432, T434, TOP432A, TOP434A, TOP432, TOP432NA, TOP434NA, TAM432, TAM434, TAM438 |
![]() |
Multi, Four | |
| Came TOP432M, TOP434M | Multi, Four | |||
| Came TAM432SA | ![]() |
Multi, Four | ||
| Came TOP432SA | ![]() |
Multi, Four | ||
| Came TOP432NA, TOP434NA |
![]() |
Multi, Four | ||
| Came TWIN2, TWIN4 | Multi, Four | |||
| CAME TOP-432EV, TOP-434EV | ![]() |
Multi, Four | ||
| 868.350 | CAME TOP862NA, Came TOP864NA | Multi | ||
| CARDIN | 300.000 | S300 | ![]() |
Multi |
| 310.000 | S301, S302 | ![]() |
Multi | |
| 433.920 | S476 TX2, S476TX4 | ![]() |
Multi, Four | |
| CARPER | 300.000 310.000 318.000 |
C300, C310, C318, C318T | ![]() |
Multi |
|
CASALI |
330.000 | ![]() |
Multi | |
| 433.920 | Genius 433 2, Genius 433 3, JA400 TM433, JA401 TM433 | ![]() |
Multi, Four | |
| CASIT | 306.000 | ERTS92B, ERTS92T | ![]() |
Multi |
| 433.920 | ERTS92B, ERTS92T | ![]() |
Multi, Four | |
| ERTS20DB, ERTS20DQ | ![]() |
Multi, Four | ||
| ERTS476D, ERTS476Q | ![]() |
Multi, Four | ||
| TXS1, TXS2, TXS3, TXS4, TXS6 ERTS97B, ERTS97T |
Multi, Four | |||
| CELINSA | 433.920 | S10 1, S10 2, SAW1, SAW2 | ![]() |
Multi, Four |
| CENTURION | 433.920 | CLASSIC, SMART, SMART2 | ![]() |
Multi, Four |
| CHAMBERLAIN LIFTMASTER MOTORLIFT SEARS CRAFTSMAN |
300.000 | Chamberlain 300MC (multicode) | Multi | |
| 315.000 | 333LM | Multi | ||
| 360LM, 362LM, 363LM | Multi | |||
| 390.000 | 50CB, 53CB, 750CB, 753CB, 50LM, 53LM, 61LM, 62LM, 63LM, 139.53100, 139.53110, 139.53200, 139.53210 | Multi | ||
| 54CB, 756CB, 54LM, 64LM, 859CB | ![]() |
Multi |
||
| 850CB, 853CB, 959CB, 81LM, 82LM, 83LM, 84LM, 99LM |
Multi | |||
| 33LM | Multi | |||
| 418.000 | 4180, 4182, 4183 | Multi | ||
| 4185 | Multi | |||
| 787 remote keyless entry | Multi | |||
| 433.920 | 4330E, 4332E, 4333E | Multi, Four | ||
| 4335E | Multi, Four | |||
| COSTEL | 300.000 | Minitix | Multi | |
| CPS | 433.920 | TCP3, CPS, Jolly 4 | ![]() |
Multi, Four |
| CPS1 TCP3, CPS2 TCP3, CPS4 TCP3 EM1CV, EM2CV, EM4CV |
![]() |
Multi, Four | ||
| DASPI | 433.920 | Daspi Happy2 433, Daspi Pops2 | ![]() |
Multi, Four |
| Daspi Zero2, Zero2CLO, Zero4CLO | Multi, Four | |||
| DEA | 306.000 | 306 1, 306 2, 306 4 | ![]() |
Multi |
| 306 | ![]() |
Multi | ||
| 433.920 | 433 1, 433 2, 433 4, Gold S1, Gold S2 Dea Gold 238 S1, Dea Gold 238 S2, Dea Gold 239 S4 |
![]() |
Multi, Four | |
| Genie | ![]() |
Multi, Four | ||
| Punto S2 | ![]() |
Multi, Four | ||
| Dea MIO TD2, MIO TD4 | Multi, Four | |||
| DELMA | 300.000 | Apollo 300, ELSAMEC Apollo 300 | ![]() |
Multi |
| Mizard 300 1, Mizard 300 2, King | ![]() |
Multi | ||
| 433.920 | Mizard 433 1, Mizard 433 2 | ![]() |
Multi, Four | |
| King 433 2 | ![]() |
Multi, Four | ||
| Style Copy 2CH (this is a code duplicator) | Multi, Four | |||
| DICKERT | 433.920 | MAHS433 01, MAHS433 04 Note: we can NOT guarantee that it can be duplicated, because it depends by the receiver. |
![]() |
Multi, Four |
| S10-433A1L00, S10-433A4L00, S20-433A1L00, S20-433A4L00, S20-433A1000, S20-433A4000 Note: only RED buttons model can be duplicated! |
![]() |
Multi, Four | ||
|
S5-433-A2L00, S5U-433-A2L00 |
![]() |
Multi, Four | ||
| 868.350 | HS868-21 Note: only RED buttons model can be duplicated! |
![]() |
Multi | |
|
S5-868A2L00, S5U-868A2L00 |
![]() |
Multi | ||
| S10-868A100, S10-868A400, S20-868A1L00, S20-868A4L00, S20-868A1000, S20-868A4000 Note: only RED buttons model can be duplicated! |
![]() |
Multi | ||
| DIGICODE | 300.000 310.000 |
DC5010, DC5012, DC5030, DC5032, DC5040, DC5042, DC5060, DC5062, DC5070, DC5072 | ![]() |
Multi |
| DITEC | 433.920 | GOL4C | ![]() |
Multi, Four |
|
GOL4 |
![]() |
Multi, Four | ||
|
BIX LS2, BIX LP2, BIX LG4 |
![]() |
Multi, Four | ||
| DOITRAND FDOITRAND |
433.920 | MPSTF2E JAUNE, MPSTF4E, HYPERPHONE MPSTF2E_GRISE | ![]() |
Multi, Four |
| TS2DE, TS4DE | ![]() |
Multi, Four | ||
| DOORHAN | 433.920 | Multi, Four | ||
| DOORMATIC | 433.920 | SAW | ![]() |
Multi, Four |
|
DUCATI |
433.920 | TSAW1, TSAW2, TSAW3, TSAW4, 124 ELBER TSAW1, TSAW2, TSAW3, TSAW4 RONDY TSAW1, RONDY TSAW2, RONDY TSAW3 |
![]() |
Multi, Four |
| TPR10-A, TPR20-A RONDY TPR10_A, RONDY TPR20_A |
![]() |
Multi, Four | ||
| TE2 | ![]() |
Multi, Four | ||
| HC6203, 6203: only blue with transparent buttons, and transparent with transparent buttons |
![]() |
Multi, Four | ||
| ECP | 292.000 |
FIX 292 MHz F105611 | ![]() |
Multi |
| KEY 292 MHz F106038 | ![]() |
Multi | ||
| ELBE | 433.920 | 501, 502, 504 | ![]() |
Multi, Four |
| 502a, 504a | ![]() |
Multi, Four | ||
| 502, 504 | ![]() |
Multi, Four | ||
| ELCA | 300.000 | Aster 1100, Aster 1101 | ![]() |
Multi |
| 433.920 |
IRIS, IRIS 9CH. Model 433D only! |
![]() |
Multi, Four | |
| ASTER2 | ![]() |
Multi, Four | ||
| Aster 1000, Aster1001. Model 433D only! Colors: black, blue, light grey |
![]() |
Multi, Four | ||
| GEMINI 9CH | Multi, Four | |||
| VIRGO | ![]() |
Multi, Four | ||
| ELEK | 300.000 | KTM194B | ![]() |
Multi |
| KTR4 | ![]() |
Multi | ||
| ELV CONRAD |
868.350 | FS20 S4, FS20 S8, FS20 S8-2, FS20 S16, FS20S16R, FS20 S20-2, FS20 S20-3 | ![]() |
Multi Rev.4 |
| ELVOX | 433.920 | Elvox ET | Multi, Four | |
| Elvox ET03, ET04 | Multi, Four | |||
| 868.350 | Elvox ET08 | Multi | ||
EMFA |
287.000 | ET1, ET2, ET3 | ![]() |
Multi |
| 308.000 | ES_1, ES_2 | ![]() |
Multi | |
| ERONE | 433.920 | SETDS39433E2, SETDS39433E4 | Multi, Four | |
| ERREKA | 289.000 | Erreka E20, Erreka E22 | ![]() |
Multi |
| 433.920 | Erreka Luna, Erreka SMAT 1 RESON 1, RESON 2, RESON 3 | ![]() |
Multi, Four | |
| EUROPE AUTOMATISMES | 306.000 | ASMY1, ASMY2, ASMY4 | Multi | |
| 433.920 | ARMY1, ARMY2, ARMY4 | Multi, Four | ||
| S1, S2, S3 | Multi, Four | |||
| FAAC | 300.000 |
TM300S, TM300S05 H |
![]() |
Multi |
| 315.000 | T1, T2, T3 Faac TM1 315, TM2 315, TM3 315 |
![]() |
Multi | |
| 330.000 | TM1, TM2, TM3 Faac TM1 330, TM2 330, TM3 330 |
![]() |
Multi | |
| 418.000 | TM1 418 DS, TM2 418 DS, TM3 418 DS | ![]() |
Multi |
|
| TM 418SL, TM1 418SL, TM2 418 SL, TM3 418SL | ![]() |
Multi | ||
| 433.920 | TM1 433 DS, TM2 433 DS, TM3 433 DS TM1 433DS DPH, TM2 433DS DPH, TM3 433DS DPH |
![]() |
Multi, Four | |
| TML2 433 SLR, TML4 433 SLR, TML2-433-SLR, TML4-433-SLR, TML2 433 ESL, TML4 433 ESL |
![]() |
Multi, Four |
||
| TML2 433 SLP, TML4 433 SLP, TML2-433-SLP, TML4-433-SLP | Multi, Four | |||
| 868.350 | TM1 868 DS, TM2 868 DS, TM3 868 DS TM1 868DS DPH, TM2 868DS DPH, TM3 868DS DPH |
![]() |
Multi | |
|
FADINI BPT |
315.000 | ASTRO75-1, ASTRO75-2, ASTRO75-4 | ![]() |
Multi |
| 433.920 | 433 2M, Astro43_2m | ![]() |
Multi, Four | |
| Astro433-2, Astro433-4, Astro43-2, Astro43-4 | ![]() |
Multi, Four | ||
| FERPORT | 433.920 | Tac1, Tac2, Tac4, Tac1k, Tac2k, Tac4k, Tac2kr | ![]() |
Multi, Four |
|
FUNKMODUL ELSECO |
433.920 | T433A2K1, T433A2K2 | Multi, Four | |
| T433A2K4, T433A2K4n | Multi, Four | |||
| GIBIDI | 306.000 | TS2M | ![]() |
Multi |
| 433.920 | Open TMB 433, OPEN TMQ 433, OPEN OUT 2, OPEN OUT 4 | ![]() |
Multi, Four | |
| GOBBATO | 306.000 | T306 | ![]() |
Multi |
| GRIFFON | 403.55 | Griffon 404 MHz dip switch remotes and duplicating remotes | ![]() |
Multi |
| 433.92 | Griffon 433 MHz dip switch remotes and duplicating remotes | ![]() |
Multi, Four | |
| GTO | 318.000 | GTO Mighty Mule 1/2 buttons, RB741, RB742 | ![]() |
Multi |
| GTO Mighty Mule 3 buttons, RB743 | ![]() |
Multi | ||
| GULLIVER | 306.000 | MDRQ 306 | ![]() |
Multi |
| 433.920 | MDW 2E | ![]() |
Multi, Four | |
| HAUSS | 433.920 | Pocket 3750-1, Pocket3750-2, Pocket 3750-4 | Multi, Four | |
| HEDDOF | 318.000 | P219-1, P219-2 | ![]() |
Multi |
| P220-1, P220-2, P220-3 | ![]() |
Multi | ||
| HORMANN HOERMANN |
433.920 |
HSM2, HSM4, yellow buttons Please note that, in Netherlands, Hoermann sell this kind of remote control which transmit a rolling code: in this case it cannot be duplicated! |
![]() |
Multi, Four |
| 868.300 | HS1, HS2, HS4, blue buttons |
|
Multi | |
| HSD2 | Multi | |||
| HSE2, HSE4, blue buttons | Multi | |||
| HSM2, HSM4, blue buttons | ![]() |
Multi | ||
| HSP4, blue buttons | ![]() |
Multi | ||
| HSS2, HSS4, blue buttons | Multi | |||
| HSZ1-868, HSZ2-868 | ![]() |
Multi | ||
| HRC | 433.920 | Multi, Four | ||
| JAY | 433.920 | UBEI x1 SL1 | ![]() |
Multi, Four |
| UBET 11, UBET 21, UBET 31, UBET 41, UBET 61Â | ![]() |
Multi, Four | ||
| JCM | 290.000 | EC1, EC2, EC3, ET1, ET2, ET3 | ![]() |
Multi |
| KEY AUTOMATION | 433.920 | 900TXB-42, 900TXB-42N, 900TXP-42, 900TXP-42N | ![]() |
Multi, Four |
| 900TXB-44, 900TXG-44 | Multi, Four | |||
| 900SUB-44, 900SUB-44N, 900SUB-44W, 900SUB-44WN | Multi, Four |
|||
| 900TXK-42, 900TXW-42,900TXK-44, 900TXW-44 | ![]() |
Multi, Four | ||
| KING | 433.920 | Note: receiver should be setup withrolling code feature disabled | Multi, Four | |
| LABEL IUPPITER |
306.000 | MDR, IUPPITER 306 | ![]() |
Multi |
| 433.920 | RJW/1E, RJW/2E, RJW/4E, RJW/12E | ![]() |
Multi, Four | |
| MDW/1E, MDW/2E | ![]() |
Multi, Four | ||
| LEB | 306.000 | TSA4 | ![]() |
Multi |
| 433.920 | TMW | ![]() |
Multi, Four | |
| TSAW2N, TSAW4N | ![]() |
Multi, Four | ||
| TCP3Â (this is a code duplicator) | Multi, Four | |||
| TRK4 Note: receiver should be configured to disable rolling check. | ![]() |
Multi, Four | ||
| TPW4 | ![]() |
Multi, Four | ||
| 868.300 | TPK4 | ![]() |
Multi | |
| LINCE | 302.000 | LE TX1, LE TX2 | Multi | |
| 433.920 | LR 2035 | Multi, Four | ||
| LINEAR |
300.000 |
MULTI-CODE 308911, 308913, 1089 | ![]() |
Multi |
| MULTI-CODE 412001, 414001, 109410, 109710 | Multi | |||
| MULTICODE 306010, 307010, 108210 | ![]() |
Multi | ||
| MULTI-CODE 308301, 308302 | Multi | |||
| MULTI-CODE 105015 | ![]() |
Multi | ||
| 310.000 | Delta3 Moore-o-Matic: DT, DT2, DT2A, DT22A, DTC, DTD |
![]() |
Multi |
|
| Delta 3 Moore-o-Matic: DT3, DT4 | Multi | |||
| Delta 3 Moore-o-Matic: Mini-T LB "LadyBug" | ![]() |
Multi | ||
| 312.000 | Delta3 DTK (canada) | ![]() |
Multi | |
| MA SYSTEM | 433.920 | MA TX1, MA TX2, MA TX3 | ![]() |
Multi, Four |
| MARANTEC | 418.000 | D212, D222, D232 | Multi | |
| 433.920 | D101 | ![]() |
Multi, Four | |
| D12 | ![]() |
Multi, Four | ||
| D212, D222, D232 | Multi, Four | |||
| Digital 302, D302 | ![]() |
Multi Rev.4, Four Rev.4 |
||
| Digital 304, D304 | ![]() |
Multi Rev.4, Four Rev.4 |
||
| 868.300 | Digital 302, D302 | ![]() |
Multi Rev.4 Rev.4 |
|
| Digital 304, D304 | ![]() |
Multi Rev.4 Rev.4 |
||
| MCZ | 433.920 | Aster | Multi, Four | |
| MEIßNER MEISSNER |
433.920 | LW433-1, LW433-2, LW433-4 | Multi, Four | |
| Pocket 3750 1, 2, 4 | Multi, Four | |||
| MONSEIGNEUR | 433.920 | ARC2, ARC4 | ![]() |
Multi, Four |
| TDR 400 3845, TDR 400 3846, TDR 400 3847 T1SAW433, T2SAW433, T4SAW433 |
![]() |
Multi, Four | ||
|
MOTORLINE |
433.920 | MX1, MX2, MX3, MX4, MX6 MX11, MX12, MX13 |
![]() |
Multi, Four |
| MOTOSTAR | 433.920 | CLIKSTAR2, CLICKSTAR4 CLICK-4M, CLICKSTAR RE 532, CLICKSTAR RE 534 |
Multi, Four | |
| NICE | 306.000 | EASY S1, S2, S4 | ![]() |
Multi |
| 433.920 | FLO1, FLO2, FLO4 | ![]() |
Multi, Four | |
| VERY VE | Multi, Four | |||
| NOLOGO | 306.000 | ![]() |
Multi | |
| 433.920 | ECO DIP | ![]() |
Multi, Four | |
| NOVOTECNICA | 306.000 | BIT N1, BIT N2 | Multi | |
| BIT NT1, BIT NT2, BIT NT4 | Multi | |||
| OG | 433.920 | OG62, OG64 | ![]() |
Multi, Four |
| O&O OeO, O and O |
306.000 | O and O TX02 | Multi | |
| 433.920 | OeO T-COM DS 4-2, O&O T-COM DS 4-4 | Multi, Four | ||
| OPENOUT | 306.000 | TS2M | ![]() |
Multi |
| 433.920 | TMQ 433 2, TMQ 433 4 | ![]() |
Multi, Four | |
| PIAZZETTA | 433.920 | 4 buttons for wood/pellet heater | Multi, Four | |
| PORTAMATIC | 433.920 | MPH01, MPH02 | ![]() |
Multi, Four |
|
POWERFIX Profi |
433.920 | RCB-A 3600R | Multi, Four | |
| PRASTEL | 306.000 | NCSMT1, NCSMT2P, NCSMT4P | ![]() |
Multi |
| KMFT2P, KMFT4P, KMFT2P93, KMFT4P93 | ![]() |
Multi | ||
| 433.920 | MPSTF2E, MPSTF4E | ![]() |
Multi, Four | |
| PROEM | 433.920 | ER2C4ACM, ER4C4ACM | Multi, Four | |
| PROGET | 433.920 | ETY_433N2, ETY 433N4 | ![]() |
Multi, Four |
| EMI433-N2 | ![]() |
Multi, Four | ||
| PROTECO | 433.920 | TX433 | ![]() |
Multi, Four |
| EUROMATIC | ![]() |
Multi, Four | ||
| HIT | ![]() |
Multi, Four | ||
| PUJOL | 288.000 | JCM TRINARIO 1, TRINARIO 2, TRINARIO 3 | ![]() |
Multi |
| 288.000 | TT1, TT2, TRINARIO 1, TRINARIO 2 | ![]() |
Multi | |
| PULSAR | 318.000 | 9931-318, 9931T-318 | ![]() |
Multi |
| QUASAR | 287.000 | Tx SA4, Serie Argento, SA |
|
Multi |
| 287.000 | TXSA2T | ![]() |
Multi | |
| 306.000 | 300 2, 300 4 | ![]() |
Multi | |
| 433.920 | 433 TANGO SLIM BLEU | ![]() |
Multi, Four | |
| QUICK | 433.92 | Model: 302 | Multi |
|
| RADIODIGIT | 291.000 | TBM, TCM | Multi | |
| ROGER | 433.920 | R80/TX12, R80/TX14, R80/TX12R, R80/TX14R | Multi, Four | |
| H80/TX22 | ![]() |
|||
| G80/TX32, G80/TX34, G80/TX32R, G80/TX34R | ||||
| SEA |
433.920 | ![]() |
Multi, Four | |
| SMART433_TX2_DIP, SMART433_TX3_DIP SMART433_TX2_COPY,SMART433_TX3_COPY Smart2 Dip Switch, Smart3 Dip Switch |
![]() |
Multi, Four | ||
| 868.350 | 231103, SEA868_4 | ![]() |
Multi | |
| 231103, Head2 Dip Switch | ![]() |
Multi | ||
| SMART868-TX2-DIP, SMART868-TX3-DIP Smart2 Dip Switch, Smart3 Dip Switch |
![]() |
Multi | ||
| SEAV | 306/330 |
TX1, TX2, TX3, TX4, TX1/330 |
![]() |
Multi |
| 433.920 | TXS1, TXS2, TXS3, TXS4 | ![]() |
Multi, Four | |
| Behappy S1, Behappy S2, Behappy S3 | Multi, Four | |||
| Be Easy TX, Be Easy Murale2 | ![]() |
Multi, Four | ||
| BeSmart S2, BeSmart S4 | Multi, Four | |||
| BeFree S1 | Multi, Four | |||
| 868.300 | BeSmart H2, BeSmart H4 | Multi | ||
| BeFree H1 | Multi | |||
| SECURVERA | 433.920 | SV R2C | ![]() |
Multi, Four |
| SV R2C | ![]() |
Multi, Four | ||
| SV R4C | ![]() |
Multi, Four | ||
| SV R6C | ![]() |
Multi, Four | ||
| SENDER | 433.920 | Multi, Four | ||
|
SENTRY MARTIN ELECTRONICS |
403.550 | SENTRY binary, SENTRY trinary |
s |
Multi |
| 433.920 | SENTRY binary | Multi, Four | ||
| SERAI | 310.000 | OG/32 | ![]() |
Multi |
| 433.920 | OG/52, OG/54, OG/82, OG/84 | ![]() |
Multi, Four | |
| OG/28, OG/48, OG/62, OG/64 | ![]() |
Multi, Four | ||
| OG/02, OG/04 | ![]() |
Multi, Four | ||
| SICE | 433.920 | TX4 CLACK Bigfoot | ![]() |
Multi, Four |
| SILVELOX - INTRA | 306.000 | Green case with black buttons | ![]() |
Multi |
| 433.920 | Silvelox Intra HSM4 | ![]() |
Multi, Four | |
| SIMBA | 433.920 | Simba RC1 | Multi, Four | |
| SIMINOR | 433.920 | ER2C4ACM, ER4C4ACM, ER2C4ACS, ER4C4ACS |
Multi, Four | |
| SKYLINK |
300.000 |
MultiLink SD300M, Skylink 100, LD310M, SD310M |
![]() |
Multi |
| 318.000 | Skylink Mltilink PD-318M | ![]() |
Multi | |
| 390.000 | Multilink CB-390M, CD-390M (versions compatible with Chamberlain) |
![]() |
Multi | |
| SMD | 433.920 | LW433-1, LW433-2, LW433-4 : AM models only | Multi, Four | |
| SOMFY | 433.920 | LEB TMW | ![]() |
Multi, Four |
| SPARKRITE | ? | SRA2-2 | ![]() |
Multi |
| STAGNOLI | 433.920 | ZEUS AZTR | ![]() |
Multi, Four |
| 868.350 | ZEUS AZTR | ![]() |
Multi | |
| STANLEY | 310.000 | 24286 | ![]() |
Multi |
| 1082 | ![]() |
Multi | ||
| 1050 | ![]() |
Multi | ||
| 1094 | Multi | |||
| 1097 | ![]() |
Multi | ||
| STARTEC | 433.920 | TXQ2 | ![]() |
Multi, Four |
| STINGER | 300.000 310.000 318.000 390.000 |
300MCD21V, 300MCD22V 310MCD21V, 310LID21V, 310LID22V 318ALD31V 390LMD21V, 390LMPB1V |
diff. colors |
Multi |
| TAU | 315.000 | 250 TXA2, 250 TXA4 | ![]() |
Multi |
| 433.920 | 250 SLIM, 250K-SLIM, 250K-SLIMC | ![]() |
Multi, Four | |
| 250TXD2, 250TXD4 | ![]() |
Multi, Four | ||
| 250BUG2, 250BUG4 | ![]() |
Multi, Four | ||
| 250T-4, 250T-4C | Multi, Four | |||
| TEC KEY | 300.000 | MK1010 | ![]() |
Multi |
| TECNOMATIC | 433.920 | TQ433 | Multi, Four | |
| TEDSEN BERNER GFA Elektromaten |
433.920 | SKX1MD, SKX2MD, SKX3MD, SKX4MD | ![]() |
Multi, Four |
| SKX1KD, SKX2KD, SKX4KD, SKX6KD | Multi, Four | |||
| SKX1DL, SKX2DL, SKX3DL, SKX4DL | ![]() |
Multi, Four | ||
| SKX1LC, SKX2LC, SKX3LC, SKX4LC | Multi, Four | |||
| SKX1SL, SKX2SL, SKX3SL, SKX4SL | Multi, Four | |||
| SKJ | ![]() |
Multi, Four | ||
| SKX1WD, SKX2WD, SKX4WD, SKX11WD, SKX22WD, SKX44WD | ![]() |
Multi, Four | ||
| TELCOMA | 306.000 | RCS TP2 | ![]() |
Multi Rev.4 |
| RCST2, RCST4 | Multi Rev.4 |
|||
| 433.920 | Telcoma EDGE 2, Telcoma EDGE 4 | Multi, Four | ||
| TANGO 2 SW, TANGO4 SW | ![]() |
Multi, Four | ||
| TANGO BLUE 2, TANGO 4 BLUE, TANGO BLEU 2, TANGO BLEU 4 | Multi, Four | |||
| TANGO 2 N, TANGO 4 N | Multi, Four |
|||
| TANGO 2 SLIM, TANGO 4 SLIM | ![]() |
Multi, Four | ||
| Telcoma Noire2, Noire4 Note: Rolling-code jumper should be removed from the receiver! |
Multi, Four |
|||
| TANGO WIN3 | ![]() |
Multi, Four | ||
| TANGO2, TANGO4 | Multi, Four | |||
| TELEMATIC | 300.000 | TL1, TL2 | ![]() |
Multi |
| TKC | 433.920 | TSAW433 | ![]() |
Multi, Four |
| TONKARR | 287.000 | TK2 | ![]() |
Multi |
| TORAG | 433.920 | S429 1, S429 2, S429 4 | ![]() |
Multi, Four |
| TORMATIC DORMA |
433.920 | HS, Dorma HS43 1E, HS43 2E, HS43 3E, HS43 4E | ![]() |
Multi, Four |
| MAHS, Siebau, Novoferm, Dorma | ![]() |
Multi, Four | ||
| MHS, MHS43-1 | ![]() |
Multi, Four | ||
| TREMA | 433.920 | TO93TV1, TO93TV2, TO93TV4 | ![]() |
Multi, Four |
| TUBAUTO | 433.920 | DIGITAL 101 433 | ![]() |
Multi, Four |
| V2 | 306.000 | TRR1_306 |
![]() |
Multi |
| 318.000 | TPS1K | ![]() |
Multi | |
| 433.920 |
PHOENIX series: Phoenix2, Phoenix2P, Phoenix4, Phoenix4P, TXC2 Contr.47, TXC4 Contr.47, Handy2 Contr.47, Handy4 Contr.47, TRC4 Contr.47, TSC4 Contr.47 . |
|
Multi, Four | |
| TCP3 | ![]() |
Multi, Four | ||
| TCP3, ARC3 | ![]() |
Multi, Four | ||
| TCP3 | ![]() |
Multi, Four | ||
| TPR | ![]() |
Multi, Four | ||
| T1SAW/433, T2SAW/433, T4SAW/433 | ![]() |
Multi, Four | ||
| TRR1, TRR2, TRR4 | ![]() |
Multi, Four | ||
| PMR2, PMR4 | ![]() |
Multi, Four | ||
| 868.300 | PHOENIX series: Phoenix2-868, Phoenix2P-868, Phoenix4-868, Phoenix4P-868. Note:the receiver should be programmed with the rolling code feature disabled. When the code is learned, LED will blink for 6 times to highlight that the code is rolling. |
![]() |
Multi | |
| VISONIC | 315.000 | WT100, WT100A, WT101, WT101A, WT102, WT104,WT-201, WT-201A, WT-201WP, WT-201AWP | ![]() |
Multi |
| 418.000 | WT-100, WT-100A, WT-101, WT-101A, WT-102, WT-104,WT-201, WT-201A, WT-201WP, WT-201AWP | Multi | ||
| 433.920 | WT 100, WT 100A, WT 101, WT 101A, WT 102, WT 104,WT 201, WT 201A, WT 201WP, WT 201AWP | Multi, Four | ||
| VSEG | 433.920 | CR SLIM | Multi, Four | |
| VISA ELECTRONICS | 306.000 | VISA VRK 4021A | Multi | |
| 433.920 | Visa Beet 1, Visa Skippy | Multi | ||
| WAINE-DALTON | 433.920 | S429-1, S429-2, S429-4, S429-mini | Multi, Four | |
| S425 | Multi, Four | |||
|
WECLA |
433.920 | 433, 433_2 | ![]() |
Multi, Four |
| ZULLAN | 315.000 | 250TXA1H, 250TXA2H, 250TXA4H | ![]() |
Multi |
| OEM | 315.000 |
|
![]() |
Multi |
Our products MULTI and FOUR cannot duplicate remote controls which transmits below 286 MHz (for example 27, 30, 40 MHz remote controls). The following table lists some remote controls that are known to be not compatible.
| Company | Frequency | Models | Photo | Notes |
| ALLMATIC | 433.920 | TECH3, BRO | Several different enclosures |
Rolling code |
| APERTO | 434.420 | TX02-434-2 | ![]() |
Rolling code |
| AVIDSEN | 433.920 | TOV | ![]() |
Rolling code |
| B&D | 433.920 | 062170/4333EBD 1A4982 | ![]() |
10 trinary |
| BFT | 433.920 | MITTO2, MITTO4 | ![]() |
Rolling code |
| CARDIN | 433.920 | S435 | Rolling code | |
| S438, S449 | FM / FSK |
|||
| 868.300 | S486 | FM / FSK | ||
|
CHAMBERLAIN |
433.920 |
84335eml, 94335e |
Rolling code |
|
| DICKERT |
433.920 |
S5-433-A2K00, S5U-433-A2K00, S10-433A1K00, S10-433A4K00, S20-433A1K00, S20-433A4K00, HS868-50 roltek, S5-868A2K00, S5U-868A2K00, S10-868A1K00, S10-868A4K00, S20-868A1K00, S20-868A4K00 |
![]() |
Rolling code |
| DUCATI ALLDUCKS |
433.920 | 6203/R, 6203/P, 6204 | Several different enclosures |
Rolling code |
| EAZYMATIC | 218.000 | 218 MHz | ||
| FAAC | 868.300 | TML2868SLH | Rolling code | |
| XT2868SLH, XT4868SLH | ![]() |
Rolling code | ||
| FADINI | 868.350 | BIRIO | Rolling code, programmed by palm | |
|
GENIUS |
868.350 | AMIGO JA332, AMIGO JA334 | ![]() |
Rolling code |
| GLIDEROL | 868.350 | TM-868C | Rolling code (KeeLoq) | |
| HORMANN HOERMANN |
29-40MHz | Models with green or grey buttons | Cannot be duplicated | |
| 433.920 | RS2-433, RS4-433 (Rolling code versions, usually sold in Netherlands) |
Rolling code (KeeLoq) |
||
| MHOUSE | 433.920 | TX3, TX4 | Rolling code | |
| NICE | 30-40 | BT1K, BT2K, BT4K, K1M, K2M, K4M | Several different enclosures |
30-40MHz |
| 433.920 | SMILO SM2, SM4 | ![]() |
Rolling code | |
| FLO1R-S, FLO2R-S, FLO4R-S | ![]() |
Rolling code | ||
|
NORMSTAHL |
433.920 | EA433 | ![]() |
Rolling code |
| NOVOFERM | 433.920 | MNHS433, NOVOTRON 502,504 | Rolling code | |
| PROEM / SIMINOR | 433.920 | ER2C4ACM, ER4C4ACM, ER2C4ACS, ER4C4ACS | ![]() |
Rolling code |
| PRASTEL | 433.920 | MPSTP2E,MPSDT2E, MT2E, MT4E, | Rolling code | |
| PUJOL | 433.920 | P215/4, VARIO | ![]() |
Rolling code |
| RIB | 312.000 | 312A | ||
| 433.920 | 433 | |||
| SKYLINK | 433.920 | R3 serie | Rolling code | |
| SOMFY | 433.420 | Keytis NS 2 RTS, Keytis NS 4 RTS | ![]() |
Rolling code |
| SOMMER | 868.800 | TX03 868 04 | Rolling code | |
| TELECO | 433.920 | TXP, TXR, TXV, TXW, TVT series | Rolling code | |
| TELE RADIO | 433 - 868 | Tele radio T60 series | FM | |
| WELLER | 868.500 | MT87A, MT87A4 | ![]() |
Rolling code |
Extended support for Marantec Digital (some codes cannot be learned before).
Add new code: FS20 protocol, used for domotic / home automation
Longer time before entering learning mode (buttons 1+2 should be pressed for 1s, now)
BugFix on the management of certain TELCOMA RCS and BFT RCS remote controls, operating at 306 MHz.
New remote control Alltronik S425.
Ultimo aggiornamento (Venerdì 02 Dicembre 2011 14:44) Scritto da Webmaster Martedì 05 Ottobre 2010 07:28

This very small device, only 29x29x10mm, can be used with remote controls like Creasol Multi and Creasol Four to activate gate and garage doors operators, as like as other electronic devices which have one low-voltage input connected to a pushbutton switch.
It's very easy to be installed, using only two wires for the power supply and two opto-coupled wires which should be connected in parallel with the electronic board that should be remotely controlled.
The operating frequency, 433.92 MHz, 868.3 MHz or 315 MHz, can be simply programmed using the Prog button, as like as the type of output which should be programmed as bistable, hold-to-run and as timer with time programmed from 250 ms to 15 minutes.
When the proper code is transmitted by the remote control, Creasol Rec1 shorts the supply wires, simulating a pushbutton. The output is opto-insulated: maximum admitted current is 15mA and maximum voltage 40Vdc.
Creasol Rec1 can be used to:
It's supplied in nice blister with instructions printed in several languages.

This device has 5 wires, one of which is used as antenna and should not be connected anywhere. Two wires should be connected to a power supply, usually provided by the operator boards (typically 12 or 24V ac/dc), and two wires should be connected, in parallel to the existing switch, to the input of the electronic board, as shown in the figure.
Check the voltage on the start button: it should be in the range 2÷40Vdc. Mark the positive pole.
Measure the current through the start button: it should be less than 15mA.
Connect the 2 wires marked as Supply to a power supply: don't care about polarity.
Connect the wire Switch+ to the positive pole of the start button, and the wire Switch- to the negative pole of the start button.
Initialize a new code on the device, as specified in Fig. 3: turn power OFF, press and hold the Prog button then turn power ON: LED starts flashing slowly. After 10 seconds LED will flash quickly for 5 times, indicating that the new code has been initialized. Release the Prog button.
Activate the duplication procedure on the remote control, then press the Prog button on the device to transmit the device to the remote control. Repeat the procedure on other remote controls, or start duplication from the programmed remote control to other empty remote controls.
Creasol Rec1 can be used with almost any remote control duplicator: we suggest to use it with Creasol Four, if only 433.92 MHz frequency is needed, or with Creasol Multi : in the latter case you can control more devices, even if they operates in different frequencies, for example you can use Creasol Multi for

When the receiver should be connected to a circuit that works at high voltage (230V courtesy light, for example) or high current, a Relay should be connected as shown below.
Please note that Creasol Rec1 or UniRec1 has an opto-insulated output that consists in a NPN transistor, where Switch+ is the collector and Switch- is the emitter.
For this reason, the external relay is not needed when the receiver output should be connected to a low-voltage/low-current input of an electronic board.

Download this application note in PDF format
Ultimo aggiornamento (Mercoledì 16 Maggio 2012 05:27) Scritto da Webmaster Martedì 05 Ottobre 2010 07:28

This very small device, only 29x29x10mm, can be used with almost any radio remote control in the market which transmit in a frequency between 288 and 868 MHz.
It's very easy to be installed, using only two wires for the power supply and two opto-coupled wires which should be connected in parallel with the electronic board that should be remotely controlled.
The operating frequency, shown in the table, can be simply programmed using the Prog button, as like as the type of output which should be programmed as bistable, hold-to-run and as timer programmed from 250ms to 15 minutes.
In the same receiver it's possible to learn up to 60 different remote controls, even if different brand/model, both fixed and rolling code: the number of remote controls depends by the code complex, so, for example, it's possible to manage 40 KeeLoq rolling code remote controls.
When a known code is transmitted by the remote control, Creasol UniRec1 shorts the switch wires, simulating a pushbutton. The output is opto-insulated: maximum admitted current is 15mA and maximum voltage 40Vdc.
Creasol UniRec1 can be used to:
It's supplied in nice blister with instructions printed in several languages. We can also supply this device with customized instructions.

This device has 5 wires, one of which is used as antenna and should not be connected anywhere. Two wires should be connected to a power supply, usually provided by the operator board (typically 12 or 24Vac/dc). The remaining two wires should be connected to the input of the electronic board, in parallel to the existing switch (start button), as shown in the figure.
Check the voltage on the start button: it should be in the range 2÷40Vdc. Mark the positive pole.
Measure the current through the start button: it should be less than 15mA.
Connect the 2 wires marked as Supply to a power supply: don't care about polarity.
Connect the wire Switch+ to the positive pole of the start button, and the wire Switch- to the negative pole of the start button.
Press the Prog button twice to enable learning mode: then it's possible to press a button on the existing remote control, within 10s, to learn it. Every time a new code is learned, the 10s timeout is reload.
LED flashes 2 times if the remote control has been learned, 3 times if it was already learned, 6 times if memory is full.
Press the Prog button 3 times, then it's possible to transmit, within 10s, from the remote control that need to be removed: LED flashes 4 times indicating that the remote control has been removed.
Alternatively, to blank memory (remove all remote controls), press Prog button for 10 times, LED flashes 10 times, then press again Prog button 3 times.
Press the Prog button 4 times and follow the same procedure to learn remote controls: in this case it's possible to learn one or more "master" remote control, which can be used only to enable the learning procedure remotely, without the need to press the Prog button. Note that "master" remote controls do NOT activate the receiver output.
To learn new remote controls in this way, put the "master" remote control in trasmission for 1-2 seconds, then start to transmit for 1-2 seconds from the new remote controls: every time a new remote control is learned, the 10s timer is reload to permit successive learnings.
When the receiver should be connected to a circuit that works at high voltage (230V courtesy light, for example) or high current, a Relay should be connected as shown below.
Please note that Creasol Rec1 or UniRec1 has an opto-insulated output that consists in a NPN transistor, where Switch+ is the collector and Switch- is the emitter.
For this reason, the external relay is not needed when the receiver output should be connected to a low-voltage/low-current input of an electronic board.

Download this application note in PDF format
| Company | Frequency | Models | Photo | Number of differente codes that can be learned |
Frequency value (cmd=5) | Notes |
| ADYX | 433.920 | ALIZE EM2C, ALIZE EM4C | 60 |
2 | ||
| BRAVO TE4433H | ![]() |
40 | 2 | |||
| AETERNA | 433.920 | TX433 1,2,4 buttons | ![]() |
60 |
2 | |
| ALLMATIC | 306.000 | ASMX2, ASMX4 | ![]() |
60 |
8 | Original remote controls may be not stable in frequency |
| 433.920 | AEMX1, AEMX2, AEMX4 | ![]() |
60 |
2 | ||
| EUROPE AUTO ARMY1, ARMY2, ARMY4 | 60 |
2 | ||||
| MX1, MX2, MX4 | ![]() |
60 |
2 | |||
| Allmatic BRO1WN, B.RO2WN, B.RO4WN, B.ROSTAR, B.RO ministar | 40 | 2 | ||||
| TECH3, BROOVER, BROSTAR |
40 | 2 | ||||
| PASS1, PASS2, PASS4 | 40 | 2 | ||||
| ALLTRONIK | 433.920 |
S429_1, S429_2, S429_4, S429_M Be sure that your remote operates at 433.92MHz! |
40 |
2 | ||
| S425 | 40 |
2 | ||||
| ANSONIC | 433.920 | SA 434-1E, SA434-2E, SA434-3E, SA434-4E |
60 |
2 | ||
| SA 434-1MINI, SA434-2MINI, SA 434-2Midi | 60 |
2 | ||||
| 868.350 | SA 868-1E, SA 868-2E, SA868-3E, SA868-4E | 60 |
3 |
|||
| SA 868-1mini/M, SA 868-2mini/M (dip switch version) | 60 |
3 |
||||
| APERTO | 433.920 | CPS1, CPS2, CPS |
![]() |
60 |
2 | |
| APRIMATIC | 433.920 | TR2, TR4 | 40 | 2 | ||
| TX2M, TX4M | 40 | 2 | ||||
| AVIDSEN | 433.920 | 100601 micromark MM23164 | ![]() |
34 |
2 | |
| 104505 | ![]() |
34 |
2 | |||
| 100951, 100955, 100550, 100400 | 34 |
2 | ||||
| TOV 4 104700, ASTRELL, 104250, 614700 | 26 | 2 | ||||
| BANDY | 433.920 | ![]() |
variable |
2 | Not sure it work, because this is a duplicator: check the original remote control | |
| BELFOX | 433.920 | DHS433-1, DHS433-2, DHS433-4, dip switch version | ![]() |
60 |
2 | |
| DHS 433,92 (7733), dip switch version | 60 |
2 | ||||
| 868.350 | DHS 868,3, dipswitch version | 60 |
3 |
|||
| HS 868-20 | 60 |
3 |
||||
| BENINCA' | 306.000 | LOT1A, LOT2A, LOT4A | ![]() |
60 |
8 | Original remote controls may be not stable in frequency |
| LOTX1A, LOTX2A, LOTX4A | ![]() |
60 |
8 | Original remote controls may be not stable in frequency | ||
| LO.TX2PS | ![]() |
60 |
8 | Original remote controls may be not stable in frequency | ||
| 433.920 | LOT1W, LOT2W, LOT4W | ![]() |
60 |
2 | ||
| LOT2WMS | ![]() |
60 |
2 | |||
| T2WK, T4WK | ![]() |
60 |
2 | |||
| LOTX1W, LOTX2W, LOTX4W | 60 |
2 | ||||
| TO.GO2WP, TO.GO4WP, TO.GO2WK, TO.GO4WK | 60 |
2 | ||||
|
IO.COLOURS, IO.GREY, TO.GO2WV, TO.GO4WV, APPLE.2, APPLE.4 |
Several images | 40 | 2 | |||
| BESIDE | 433.920 | BEZAP | ![]() |
60 |
2 | |
| HIT | ![]() |
60 |
2 | |||
| BETA ELETTRONICA | 315.000 |
BETALARM 6500 |
![]() |
60 |
4 | Original remote controls may be not stable in frequency |
| 330.000 | BETALARM 5500 | ![]() |
60 |
11 | Original remote controls may be not stable in frequency | |
| BFT | 306.000 | RCS | ![]() |
60 |
8 | Original remote controls may be not stable in frequency |
| 315.000 | VTM1, VTM2, VTM4 | ![]() |
60 |
4 | Original remote controls may be not stable in frequency | |
| 418.000 | GT01, GT02, GT04 | ![]() |
60 |
14 | ||
| 433.920 | TE01, TE02 ( TEO1, TEO2 ) | ![]() |
60 |
2 | ||
| TE04 ( TEO4 ) | ![]() |
60 |
2 | |||
| BFT MITTO 2, MITTO 4, MITTO-2A, BFT MITTO-4A, MITTO-2M, MITTO-4M BFT TRC 1, TRC 2, TRC 4 |
![]() |
40 | 2 | |||
| BREDA | 433.920 | Breda TOP432SA | Like CAME TOP432SA, blue | 60 | 2 | |
| CAME | 315.000 | Came T312M, T314M | 60 |
4 | Original remote controls may be not stable in frequency | |
| 433.920 | Came T432, T434 Came TOP432A, TOP434A, TOP432, TOP432NA, TOP434NA, Came Came TAM432, TAM434, TAM438 |
![]() |
60 |
2 | ||
| Came TOP432M, TOP434M | 60 |
2 | ||||
| Came TAM432SA | ![]() |
48 |
2 | |||
| Came TOP432SA | ![]() |
60 |
2 | |||
| Came TOP432NA, TOP434NA |
![]() |
60 |
2 | |||
| Came TWIN2, TWIN4 | 60 |
2 | ||||
| CAME TOP-432EV, TOP-434EV | ![]() |
60 | 2 | |||
| CAME ATOMO AT01, AT02, AT04 | 40 | 2 | ||||
| 868.350 | CAME TOP862NA, Came TOP864NA | 60 | 3 | |||
| CARDIN | 300.000 | S300 | ![]() |
60 |
6 | Original remote controls may be not stable in frequency |
| 310.000 | S301, S302 | ![]() |
60 |
9 | Original remote controls may be not stable in frequency | |
| 433.920 | S476 TX2, S476TX4 | ![]() |
48 |
2 | ||
|
CASALI |
330.000 | ![]() |
60 | 11 | Original remote controls may be not stable in frequency | |
| 433.920 | Genius 433 2, Genius 433 3, JA400 TM433, JA401 TM433 | ![]() |
60 | 2 |
||
| Genius A252, A254 | 40 | 2 | ||||
| 868.350 | Genius Amigo JA332, JA334, JA332 grey, JA334 grey | 40 | 3 | |||
| CASIT | 306.000 | ERTS92B, ERTS92T | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | ERTS92B, ERTS92T | ![]() |
60 | 2 |
||
| ERTS20DB, ERTS20DQ | ![]() |
60 | 2 |
|||
| ERTS476D, ERTS476Q | ![]() |
60 | 2 |
|||
| TXS1, TXS2, TXS3, TXS4, TXS6 ERTS97B, ERTS97T |
60 | 2 |
||||
| CELINSA | 433.920 | S10 1, S10 2, SAW1, SAW2 | ![]() |
48 |
2 |
|
| CENTURION | 433.920 | CLASSIC, SMART, SMART2 | ![]() |
60 | 2 |
|
| CHAMBERLAIN LIFTMASTER MOTORLIFT SEARS CRAFTSMAN |
300.000 | Chamberlain 300MC (multicode) | Not supported yet! |
|||
| 315.000 | 333LM | Not supported yet! |
||||
| 360LM, 362LM, 363LM | Not supported yet! | |||||
| 390.000 | 50CB, 53CB, 750CB, 753CB, 50LM, 53LM, 61LM, 62LM, 63LM, 139.53100, 139.53110, 139.53200, 139.53210 | Not supported yet! | ||||
| 54CB, 756CB, 54LM, 64LM, 859CB | ![]() |
Not supported yet! | ||||
| 850CB, 853CB, 959CB, 81LM, 82LM, 83LM, 84LM, 99LM |
Not supported yet! | |||||
| 33LM | Not supported yet! | |||||
| 418.000 | 4180, 4182, 4183 | Not supported yet! | ||||
| 4185 | Not supported yet! | |||||
|
787 remote
less entry |
Not supported yet! | |||||
| 433.920 | 4330E, 4332E, 4333E | Not supported yet! | ||||
| 4335E | Not supported yet! | |||||
| CPS | 433.920 | TCP3, CPS, Jolly 4 | ![]() |
60 | 2 |
|
| CPS1 TCP3, CPS2 TCP3, CPS4 TCP3 EM1CV, EM2CV, EM4CV |
![]() |
60 | 2 |
|||
| DASPI | 433.920 | Daspi Happy2 433, Daspi Pops2 | ![]() |
60 | 2 |
|
| Daspi Zero2, Zero2CLO, Zero4CLO | 60 | 2 | ||||
|
Daspi Zero2RC |
40 | 2 | ||||
| DEA | 306.000 | 306 1, 306 2, 306 4 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 306 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency | ||
| 433.920 | 433 1, 433 2, 433 4, Gold S1, Gold S2 Dea Gold 238 S1, Dea Gold 238 S2, Dea Gold 239 S4 |
![]() |
60 | 2 |
||
| Dea Gold 288-R2, Dea Gold 289-R4 | 40 | 2 | ||||
| Genie | ![]() |
60 | 2 |
|||
| Punto S2 | ![]() |
60 | 2 |
|||
| Dea MIO TD2, MIO TD4 | 60 | 2 |
||||
| Dea MIO TR2, MIO TR4 | 40 | 2 | ||||
| DELMA | 300.000 | Apollo 300, ELSAMEC Apollo 300 | ![]() |
60 | 6 |
Original remote controls may be not stable in frequency |
| Mizard 300 1, Mizard 300 2, King | ![]() |
60 | 6 |
Original remote controls may be not stable in frequency | ||
| 433.920 | Mizard 433 1, Mizard 433 2 | ![]() |
60 | 2 |
||
| King 433 2 | ![]() |
60 | 2 |
|||
| Style Copy 2CH (this is a code duplicator) | 60 | 2 |
||||
| DICKERT | 433.920 | MAHS433 01, MAHS433 04 Note: we can NOT guarantee that it can be duplicated, because it depends by the receiver. |
![]() |
Not supported yet! |
||
| S10-433A1L00, S10-433A4L00, S20-433A1L00, S20-433A4L00, S20-433A1000, S20-433A4000 Note: only RED buttons model can be duplicated! |
![]() |
60 | 2 |
|||
|
S5-433-A2L00, S5U-433-A2L00 |
![]() |
60 | 2 |
|||
| 868.350 | HS868-21 Note: only RED buttons model can be duplicated! |
![]() |
60 | 3 |
||
|
S5-868A2L00, S5U-868A2L00 |
![]() |
60 | 3 |
|||
| S10-868A100, S10-868A400, S20-868A1L00, S20-868A4L00, S20-868A1000, S20-868A4000 Note: only RED buttons model can be duplicated! |
![]() |
60 | 3 |
|||
| DIGICODE | 300.000 310.000 |
DC5010, DC5012, DC5030, DC5032, DC5040, DC5042, DC5060, DC5062, DC5070, DC5072 | ![]() |
60 | 6 or 9 |
Original remote controls may be not stable in frequency |
| DITEC | 433.920 | GOL4C | ![]() |
60 | 2 |
|
|
GOL4 |
![]() |
34 |
2 |
|||
|
BIX LS2, BIX LP2, BIX LG4 |
![]() |
34 |
2 |
|||
| DOITRAND FDOITRAND |
433.920 | MPSTF2E JAUNE, MPSTF4E, HYPERPHONE MPSTF2E_GRISE | ![]() |
60 | 2 |
|
| TS2DE, TS4DE |
![]() |
60 | 2 |
|||
| DOORHAN | 433,920 | 40 | 2 | |||
| DOORMATIC | 433.920 | SAW | ![]() |
60 | 2 |
|
|
DUCATI |
433.920 | TSAW1, TSAW2, TSAW3, TSAW4, 124 ELBER TSAW1, TSAW2, TSAW3, TSAW4 RONDY TSAW1, RONDY TSAW2, RONDY TSAW3 |
![]() |
60 | 2 |
|
| TPR10-A, TPR20-A RONDY TPR10_A, RONDY TPR20_A |
![]() |
60 | 2 |
|||
| TE2 | ![]() |
60 | 2 |
|||
| 6203blue and transparent, with transparent buttons |
|
60 | 2 |
|||
| 6203, with blue or red buttons | ![]() |
40 | 2 | |||
| HC6204 | ![]() |
40 | 2 | |||
| ELBE | 433.920 | 501, 502, 504 | ![]() |
60 | 2 |
|
| 502a, 504a | ![]() |
60 | 2 |
|||
| 502, 504 | ![]() |
60 | 2 |
|||
| ELCA | 300.000 | Aster 1100, Aster 1101 | ![]() |
60 | 6 |
Original remote controls may be not stable in frequency |
| 433.920 |
IRIS, IRIS 9CH. |
![]() |
60 | 2 |
||
| ASTER2 | ![]() |
60 | 2 |
|||
| Aster 1000, Aster1001. Colors: black, blue, light grey |
![]() |
60 | 2 |
|||
| GEMINI 9CH | 60 | 2 |
||||
| VIRGO | ![]() |
60 | 2 |
|||
|
ELV |
868.350 | FS20 S4, FS20 S8, FS20 S8-2, FS20 S16, FS20S16R, FS20 S20-2, FS20 S20-3 |
![]() |
24 | 3 | |
| ELVOX | 433.920 | Elvox ET | 60 | 2 |
||
| Elvox ET03, ET04 | 60 | 2 |
||||
| Elvox ERT01 | 40 | 2 | ||||
| 868.350 | Elvox ET08 | 60 | 3 |
|||
| ERONE | 433.920 | SETDS39433E2, SETDS39433E4 | 60 | 2 |
||
| Erone SETR2641-AM2.B, SETR2641-AM2.N, SETR2641-AM2.R, SETR2641-AM2.C, SETR2641AM1, S5TR2641E2, S5TR2641E4, S2TR2641-E2M, SETR2641-TM, TSW2641E1 | ![]() |
40 | 2 | |||
| 868.350 | Erone S2TR2681-E2, 2TR2681-E4, 2TR2681-E2M | ![]() |
40 | 2 | ||
| ERREKA | 433.920 | Erreka LUNA, SMAT RESON 1, RESON 2, Erreka RESON 3 | ![]() |
48 | 2 | |
| Erreka ROLLER-1, ROLLER-2, Erreka ROLL-2 JOY, Erreka Roll-4 JOY, Erreka LIRA, Erreka IRIS 2, IRIS 4 | ![]() |
40 | 3 | |||
| 868.300 | Erreka Roller 1 868, Roller 2 868, Erreka Roller 4 868 | 40 | 4 | |||
| EUROPE AUTOMATISME | 306.000 | ASMY1, ASMY2, ASMY4 | 60 | 8 | Original remote controls may be not stable in frequency | |
| 433.920 | ARMY1, ARMY2, ARMY4 | 60 | 2 | |||
| S1, S2, S3 | 60 | 2 | ||||
| FAAC | 300.000 | Faac TM300S, TM300S05 H Faac TM1 300, TM2 300, TM3 300 |
![]() |
34 |
6 |
Original remote controls may be not stable in frequency |
| 315.000 | Faac T1, T2, T3 Faac TM1 315, TM2 315, TM3 315 |
![]() |
34 |
4 |
Original remote controls may be not stable in frequency | |
| 330.000 | Faac TM1, TM2, TM3 Faac TM1 330, TM2 330, TM3 330 |
![]() |
34 |
11 |
Original remote controls may be not stable in frequency | |
| 418.000 | Faac TM1 418 DS, TM2 418 DS, TM3 418 DS | ![]() |
34 | 14 |
||
| Faac TM 418SL, TM1 418SL, TM2 418 SL, TM3 418SL | ![]() |
34 |
14 |
|||
| 433.920 | Faac TM1 433 DS, TM2 433 DS, TM3 433 DS TM1 433DS DPH, TM2 433DS DPH, TM3 433DS DPH |
![]() |
60 | 2 |
||
| Faac TML2 433 SLR, TML4 433 SLR, TML2-433-SLR, TML4-433-SLR, TML2 433 ESL, TML4 433 ESL | ![]() |
34 |
2 |
|||
| Faac TML2 433 SLP, TML4 433 SLP, TML2-433-SLP, TML4-433-SLP | 34 |
2 |
||||
| Faac T2 433 SLH, Faac T4 433 SLH |
40 | 2 | ||||
| Faac TML2 433 SLH, TML4 433 SLH | 40 | 2 | ||||
| Faac XT2 433 SLH, XT4 433 SLH | ![]() |
40 | 2 | |||
| 868.350 | Faac TM1 868 DS, TM2 868 DS, TM3 868 DS Faac TM1 868DS DPH, TM2 868DS DPH, TM3 868DS DPH |
![]() |
60 | 3 |
||
| Faac T2 868 SLH, Faac T4 868 SLH | 40 | 3 | ||||
|
Faac TML2 868 SLH, TML4 868 SLH |
40 | 3 | ||||
| Faac XT2 868 SLH, Faac XT4 868 SLH | ![]() |
40 |
3 |
|||
| Faac DL2 868 SLH, DL4 868 SLH | ![]() |
40 | 3 | |||
|
FADINI BPT |
315.000 | ASTRO75-1, ASTRO75-2, ASTRO75-4 | ![]() |
60 | 4 |
Original remote controls may be not stable in frequency |
| 433.920 | 433 2M, Astro43_2m | ![]() |
60 | 2 |
||
| Astro433-2, Astro433-4, Astro43-2, Astro43-4 | ![]() |
60 | 2 |
|||
| Fadini JUBI 433/2, JUBI 433/4, Fadini JUBI SMALL 433/2 | ![]() |
40 | 2 | |||
| Fadini SITI 2, Fadini SITI 4 | 40 | 2 | ||||
| 868.350 | Fadini BIRIO 2, Fadini BIRIO 4 | 40 | 3 | |||
| FERPORT | 433.920 | Tac1, Tac2, Tac4, Tac1k, Tac2k, Tac4k, Tac2kr | ![]() |
60 | 2 |
|
|
FUNKMODUL ELSECO |
433.920 | T433A2K1, T433A2K2 | 60 | 2 |
||
| T433A2K4, T433A2K4n | 60 | 2 |
||||
| GIBIDI | 306.000 | TS2M | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | Open TMB 433, OPEN TMQ 433, OPEN OUT 2, OPEN OUT 4 | ![]() |
60 | 2 |
||
| Gibidi Domino, AU1600, AU1610, AU1680, AU1680 wood, AU1810 | ![]() |
40 | 2 | |||
| GOBBATO | 306.000 | T306 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | TRA3S | 40 | 2 | |||
| GRIFFON | 403.55 | Griffon 404 MHz dip switch remotes and duplicating remotes | ![]() |
60 | 13 |
|
| 433.92 | Griffon 433 MHz dip switch remotes and duplicating remotes | ![]() |
60 | 2 |
||
| GTO | 318.000 | GTO Mighty Mule 1/2 buttons, RB741, RB742 | ![]() |
Not supported yet! |
||
| GTO Mighty Mule 3 buttons, RB743 | ![]() |
Not supported yet! |
||||
| GULLIVER | 306.000 | MDRQ 306 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | MDW 2E | ![]() |
60 | 2 |
||
| HAUSS | 433.920 | Pocket 3750-1, Pocket3750-2, Pocket 3750-4 | 60 | 2 |
||
| HEDDOF | 318.000 | P219-1, P219-2 | ![]() |
Not supported yet! |
||
| P220-1, P220-2, P220-3 | ![]() |
Not supported yet! |
||||
| HORMANN HOERMANN |
433.920 |
HSM2, HSM4, yellow buttons |
![]() |
30 |
2 |
|
| 868.300 | HS1, HS2, HS4, blue buttons |
|
30 |
3 |
||
| HSD2 | 30 |
3 |
||||
| HSE2, HSE4, blue buttons | 30 |
3 | ||||
| HSM2, HSM4, blue buttons | ![]() |
30 |
3 |
|||
| HSP4, blue buttons | ![]() |
30 |
3 |
|||
| HSS2, HSS4, blue buttons | 30 |
3 |
||||
| HSZ1-868, HSZ2-868 | ![]() |
30 |
3 |
|||
| HRC | 433.920 | 60 | 2 |
|||
| JAY | 433.920 | UBEI x1 SL1 | ![]() |
60 | 2 |
|
| UBET 11, UBET 21, UBET 31, UBET 41, UBET 61Â | ![]() |
60 | 2 |
|||
| KEY AUTOMATION | 433.920 | 900TXB-42, 900TXB-42N, 900TXP-42, 900TXP-42N | ![]() |
60 | 2 |
|
| 900TXB-44, 900TXG-44 | 60 | 2 |
||||
| 900SUB-44, 900SUB-44N, 900SUB-44W, 900SUB-44WN | |
60 | 2 |
|||
| 900TXK-42, 900TXW-42,900TXK-44, 900TXW-44 | ![]() |
60 | 2 |
|||
| Key TXB-42R, TXP-42R TXG-42R, TXG-44R, TXB-42R, TXB-44R SUB-44R TXW-42R, TXW-44R, TXK-42R, TXK-44R |
|
40 | 2 | |||
| KING | 433.920 | Not yet supported! |
||||
| LABEL IUPPITER |
306.000 | MDR, IUPPITER 306 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | RJW/1E, RJW/2E, RJW/4E, RJW/12E | ![]() |
60 | 2 |
||
| MDW/1E, MDW/2E | ![]() |
60 | 2 |
|||
| SPYCO1, SPYCO2, SPYCO3 | ![]() |
40 | 2 | |||
| LEB | 306.000 | TSA4 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | TMW | ![]() |
60 | 2 |
||
| TSAW2N, TSAW4N | ![]() |
60 | 2 |
|||
| TCP3Â (this is a code duplicator) | Variable |
2 |
Not sure it work, because this is a duplicator: check the original remote control | |||
| TRK4 | ![]() |
60 | 2 |
|||
| TPW4 | ![]() |
60 | 2 |
|||
| 868.300 | TPK4 | ![]() |
60 | 3 |
||
| LINCE | 433.920 | LR 2035 | 60 | 2 | ||
| LINEAR |
300.000 |
MULTI-CODE 308911, 308913, 1089 | ![]() |
60 | 6 or 9 |
Original remote controls may be not stable in frequency |
| MULTI-CODE 412001, 414001, 109410, 109710 | 60 | 6 or 9 |
Original remote controls may be not stable in frequency | |||
| MULTICODE 306010, 307010, 108210 | ![]() |
60 | 6 or 9 |
Original remote controls may be not stable in frequency | ||
| MULTI-CODE 308301, 308302 | 60 | 6 or 9 |
Original remote controls may be not stable in frequency | |||
| MULTI-CODE 105015 | ![]() |
60 | 6 or 9 |
Original remote controls may be not stable in frequency | ||
| 310.000 | Delta3 Moore-o-Matic: DT, DT2, DT2A, DT22A, DTC, DTD |
![]() |
60 | 9 | Not supported yet! | |
| Delta 3 Moore-o-Matic: DT3, DT4 | 60 | 9 | Not supported yet! |
|||
| Delta 3 Moore-o-Matic: Mini-T LB "LadyBug" | ![]() |
60 | 9 | Not supported yet! |
||
| 312.000 | Delta3 DTK (canada) | ![]() |
Not supported |
|||
| MA SYSTEM | 433.920 | MA TX1, MA TX2, MA TX3 | ![]() |
60 | 2 |
|
| MARANTEC | 418.000 | D212, D222, D232 | 34 |
14 |
||
| 433.920 | D101 | ![]() |
60 | 2 |
||
| D12 | ![]() |
60 | 2 | |||
| D212, D222, D232 | 60 | 2 | ||||
| Digital 302, D302 | ![]() |
34 |
2 | |||
| Digital 304, D304 | ![]() |
34 |
2 | |||
| 868.300 | Digital 302, D302 | ![]() |
34 |
3 | ||
| Digital 304, D304 | ![]() |
34 |
3 |
|||
| MCZ | 433.920 | Aster | 60 | 2 |
||
| MEIßNER MEISSNER |
433.920 | LW433-1, LW433-2, LW433-4 | 60 | 2 |
||
| Pocket 3750 1, 2, 4 | 60 | 2 |
||||
| MONSEIGNEUR | 433.920 | ARC2, ARC4 | ![]() |
60 | 2 |
|
| TDR 400 3845, TDR 400 3846, TDR 400 3847 T1SAW433, T2SAW433, T4SAW433 |
![]() |
60 | 2 |
|||
|
MOTORLINE |
433.920 | MX1, MX2, MX3, MX4, MX6 MX11, MX12, MX13 |
![]() |
60 | 2 |
|
| MOTOSTAR | 433.920 | CLIKSTAR2, CLICKSTAR4 CLICK-4M, CLICKSTAR RE 532, CLICKSTAR RE 534 |
60 | 2 |
||
| NICE | 306.000 | EASY S1, S2, S4 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | FLO1, FLO2, FLO4 | ![]() |
60 | 2 |
||
| VERY VE | 60 | 2 |
||||
| NOLOGO | 306.000 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
|
| 433.920 | ECO DIP | ![]() |
60 | 2 |
||
| NOVOTECNICA | 306.000 | BIT N1, BIT N2 | 60 | 8 |
Original remote controls may be not stable in frequency |
|
| BIT NT1, BIT NT2, BIT NT4 | 60 | 2 |
||||
| OG | 433.920 | OG62, OG64 | ![]() |
34 |
2 |
|
| O&O OeO O and O |
433.920 | T-COM DS 4-2, T-COM DS 4-4 | 60 | 2 |
||
| OeO T-COM R4-2, O&O TCOM R4-4 | 40 | 2 | ||||
| OeO ELIOT 2 - R4, O&O ELIOT 4 - R4 | ![]() |
40 | 2 | |||
| 868.350 | OeO T-COM R8-2, O&O TCOM R8-4 | ![]() |
40 | 3 | ||
| OPENOUT | 306.000 | TS2M | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | TMQ 433 2, TMQ 433 4 | ![]() |
60 | 2 |
||
| PIAZZETTA | 433.920 | 4 buttons for wood/pellet heater | 60 | 2 |
||
| PORTAMATIC | 433.920 | MPH01, MPH02 | ![]() |
60 | 2 |
|
|
POWERFIX Profi |
433.920 | RCB-A 3600R | 60 | 2 |
||
| PRASTEL | 306.000 | NCSMT1, NCSMT2P, NCSMT4P | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| KMFT2P, KMFT4P, KMFT2P93, KMFT4P93 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency | ||
| 433.920 | MPSTF2E, MPSTF4E | ![]() |
60 | 2 |
||
| PROEM | 433.920 | ER2C4ACM, ER4C4ACM | 60 | 2 |
||
| PROGET | 433.920 | ETY_433N2, ETY 433N4 | ![]() |
60 | 2 |
|
| EMI433-N2 | ![]() |
60 | 2 |
|||
| PROTECO | 433.920 | TX433 | ![]() |
60 | 2 |
|
| EUROMATIC | ![]() |
60 | 2 |
|||
| HIT | ![]() |
60 | 2 |
|||
| PUJOL | 288.000 | JCM TRINARIO 1, TRINARIO 2, TRINARIO 3 | ![]() |
60 | 5 |
Original remote controls may be not stable in frequency |
| 288.000 | TT1, TT2, TRINARIO 1, TRINARIO 2 | ![]() |
60 | 5 |
Original remote controls may be not stable in frequency | |
| PULSAR | 318.000 | 9931-318, 9931T-318 | ![]() |
Not supported yet! |
||
| QUASAR | 433.920 | 433 TANGO SLIM BLEU | ![]() |
40 |
2 |
|
| QUICK | 433.920 | Model: 302 | |
60 | 2 |
|
| ROGER | 433.920 | R80/TX12, R80/TX14, R80/TX12R, R80/TX14R | 40 | 2 |
||
| H80/TX22 | ![]() |
|||||
| G80/TX32, G80/TX34, G80/TX32R, G80/TX34R | ||||||
| SEA |
433.920 | ![]() |
60 | 2 |
||
| SMART433_TX2, SMART433_TX3 SMART433_TX2_COPY,SMART433_TX3_COPY Smart2, Smart3 |
![]() |
60 | 2 |
|||
| 868.350 | 231103, SEA868_4 | ![]() |
60 | 3 |
||
| 231103, Head2 Dip Switch | ![]() |
60 | 3 |
|||
| SMART868-TX2, SMART868-TX3 Smart2, Smart3 |
![]() |
60 | 3 |
|||
| SEAV | 306/330 |
TX1, TX2, TX3, TX4, TX1/330 |
![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | TXS1, TXS2, TXS3, TXS4 | ![]() |
60 | 2 |
||
| Behappy S1, Behappy S2, Behappy S3 | 60 | 2 |
||||
| Seav Behappy RS1, Behappy RS2, Behappy RS3 | 40 | 2 | ||||
| Be Easy TX, Be Easy Murale2 | ![]() |
60 | 2 |
|||
| BeSmart S2, BeSmart S4 | 60 | 2 |
||||
| BeFree S1 | 60 | 2 |
||||
| 868.300 | BeSmart H2, BeSmart H4 | 60 | 3 |
|||
| BeFree H1 | 60 | 3 |
||||
| SECURVERA | 433.920 | SV R2C | ![]() |
60 | 2 |
|
| SV R2C | ![]() |
60 | 2 |
|||
| SV R4C | ![]() |
60 | 2 |
|||
| SV R6C | ![]() |
60 | 2 |
|||
| SENDER | 433.920 | 60 | 2 |
|||
|
SENTRY MARTIN ELECTRONICS |
403.550 | SENTRY binary, SENTRY trinary |
s |
60 | 13 |
|
| 433.920 | SENTRY binary | 60 | 2 |
|||
| SERAI | 310.000 | OG/32 | ![]() |
34 |
9 |
Original remote controls may be not stable in frequency |
| 433.920 | OG/52, OG/54, OG/82, OG/84 | ![]() |
34 |
2 |
||
| OG/28, OG/48, OG/62, OG/64 | ![]() |
34 |
2 |
|||
| OG/02, OG/04 | ![]() |
34 |
2 |
|||
| SICE | 433.920 | TX4 CLACK Bigfoot | ![]() |
Not supported! |
||
| SILVELOX - INTRA | 306.000 | Green case with black buttons | ![]() |
60 | 8 | Original remote controls may be not stable in frequency |
| 433.920 | Silvelox Intra HSM4 | ![]() |
30 | 2 | ||
| SIMBA | 433.920 | Simba RC1 | 60 | 2 | ||
| SIMINOR | 433.920 | ER2C4ACM, ER4C4ACM, ER2C4ACS, ER4C4ACS |
60 | 2 |
||
| SKYLINK |
300.000 |
MultiLink SD300M, Skylink 100, LD310M, SD310M |
![]() |
60 | 6 or 9 |
Original remote controls may be not stable in frequency |
| 318.000 | Skylink Mltilink PD-318M | ![]() |
Not supported yet! |
|||
| 390.000 | Multilink CB-390M, CD-390M (versions compatible with Chamberlain) |
![]() |
Not supported yet! |
|||
| SMD | 433.920 | LW433-1, LW433-2, LW433-4 : AM models only | 60 | 2 |
||
| SOMFY | 433.920 | LEB TMW | ![]() |
60 | 2 |
|
| STAGNOLI | 433.920 | ZEUS AZTR | ![]() |
60 | 2 |
|
| 868.350 | ZEUS AZTR | ![]() |
60 | 3 |
||
| STANLEY | 310.000 | 24286 | ![]() |
60 | 9 |
Original remote controls may be not stable in frequency |
| 1082 | ![]() |
60 | 9 |
Original remote controls may be not stable in frequency | ||
| 1050 | ![]() |
60 | 9 |
Original remote controls may be not stable in frequency | ||
| 1094 | 60 | 9 |
Original remote controls may be not stable in frequency | |||
| 1097 | ![]() |
60 | 9 |
Original remote controls may be not stable in frequency |
||
| STARTEC | 433.920 | TXQ2 | ![]() |
60 | 2 |
|
| STINGER | 300.000 310.000 318.000 390.000 |
300MCD21V, 300MCD22V 310MCD21V, 310LID21V, 310LID22V 318ALD31V 390LMD21V, 390LMPB1V |
diff. colors |
This is a compatible remote control: please look for the compatibility of the original retmotes! |
||
| TAU | 315.000 | 250 TXA2, 250 TXA4 | ![]() |
60 | 4 |
Original remote controls may be not stable in frequency |
| 433.920 | 250 SLIM, 250K-SLIM, 250K-SLIMC | ![]() |
60 | 2 |
||
| 250TXD2, 250TXD4 | ![]() |
60 | 2 |
|||
| 250BUG2, 250BUG4 | ![]() |
60 | 2 | |||
| 250T-4, 250T-4C | 60 | 2 |
||||
| TEC KEY | 300.000 | MK1010 | ![]() |
60 | 6 |
Original remote controls may be not stable in frequency |
| TECNOMATIC | 433.920 | TQ433 | 60 | 2 |
||
| TEDSEN BERNER GFA Elektromaten |
433.920 | SKX1MD, SKX2MD, SKX3MD, SKX4MD | ![]() |
60 | 2 |
|
| SKX1KD, SKX2KD, SKX4KD, SKX6KD | 60 | 2 |
||||
| SKX1DL, SKX2DL, SKX3DL, SKX4DL | ![]() |
60 | 2 | |||
| SKX1LC, SKX2LC, SKX3LC, SKX4LC | 60 | 2 | ||||
| SKX1SL, SKX2SL, SKX3SL, SKX4SL | 60 | 2 | ||||
| SKJ | ![]() |
60 | 2 | |||
| SKX1WD, SKX2WD, SKX4WD, SKX11WD, SKX22WD, SKX44WD | ![]() |
60 | 2 | |||
| TELCOMA | 306.000 | RCST2, RCST4 | 40 |
8 | Original remote controls may be not stable in frequency | |
| 433.920 | TELCOMA EDGE 2, TELCOMA EDGE 4 | 40 | 2 | |||
| TELCOMA TANGO 2 SW, TANGO4 SW | ![]() |
40 |
2 |
|||
| TANGO BLUE 2, TANGO 4 BLUE, TANGO BLEU 2, TANGO BLEU 4 | 40 |
2 |
||||
| TANGO 2 N, TANGO 4 N | 40 |
2 |
||||
| TANGO 2 SLIM, TANGO 4 SLIM | ![]() |
40 |
2 |
|||
| Telcoma Noire2, Noire4 |
34 |
2 | ||||
| TANGO WIN3 | ![]() |
40 |
2 | |||
| TANGO2, TANGO4 | 40 |
2 |
||||
| TELECO | 433.920 |
Teleco TXP433A01 |
![]() |
40 |
2 |
|
| TELEMATIC | 300.000 | TL1, TL2 | ![]() |
60 | 6 | Original remote controls may be not stable in frequency |
| TKC | 433.920 | TSAW433 | ![]() |
60 | 2 |
|
| TORAG | 433.920 | S429 1, S429 2, S429 4 | ![]() |
60 | 2 |
|
| TORMATIC DORMA NOVOFERM |
433.920 | HS, Dorma HS43 1E, HS43 2E, HS43 3E, HS43 4E | ![]() |
60 | 2 |
|
| MAHS, Siebau, Novoferm, Dorma | ![]() |
60 | 2 |
|||
| MHS, MHS43-1 | ![]() |
60 | 2 |
|||
| Tormatic Novoferm Novotron 502 Tormatic Novoferm Novotron 504 MCHS43, MNHS433-02, MNHS433-04 |
40 | 2 | ||||
| TREMA | 433.920 | TO93TV1, TO93TV2, TO93TV4 | ![]() |
60 | 2 |
|
| TUBAUTO | 433.920 | DIGITAL 101 433 | ![]() |
60 | 2 |
|
| V2 | 306.000 | TRR1_306 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 318.000 | TPS1K | ![]() |
60 | 10 | Original remote controls may be not stable in frequency | |
| 433.920 |
PHOENIX series: Phoenix2, Phoenix2P, Phoenix4, Phoenix4P, TXC2 Contr.47, TXC4 Contr.47, Handy2 Contr.47, Handy4 Contr.47, TRC4 Contr.47, TSC4 Contr.47 . |
|
34 |
2 |
||
| TCP3 | ![]() |
60 | 2 | |||
| TCP3, ARC3 | ![]() |
60 | 2 | |||
| TCP3 | ![]() |
60 | 2 | |||
| TPR | ![]() |
60 | 2 | |||
| T1SAW/433, T2SAW/433, T4SAW/433 | ![]() |
60 | 2 | |||
| TRR1, TRR2, TRR4 | ![]() |
60 | 2 | |||
| PMR2, PMR4 | ![]() |
60 | 2 | |||
| 868.300 | PHOENIX series: Phoenix2-868, Phoenix2P-868, Phoenix4-868, Phoenix4P-868. |
![]() |
34 | 3 | ||
| VISONIC | 315.000 | WT100, WT100A, WT101, WT101A, WT102, WT104,WT-201, WT-201A, WT-201WP, WT-201AWP | ![]() |
60 | 4 |
|
| 418.000 | WT-100, WT-100A, WT-101, WT-101A, WT-102, WT-104,WT-201, WT-201A, WT-201WP, WT-201AWP | 60 | 14 |
|||
| 433.920 | WT 100, WT 100A, WT 101, WT 101A, WT 102, WT 104,WT 201, WT 201A, WT 201WP, WT 201AWP | 60 | 2 |
|||
| VSEG | 433.920 | CR SLIM | 60 | 2 |
||
| WAINE-DALTON | 433.920 | S429-1, S429-2, S429-4, S429-mini | 48 | 2 |
||
| S425 | 48 | 2 |
||||
|
WECLA |
433.920 | 433, 433_2 | ![]() |
60 | 2 |
|
| ZULLAN | 315.000 | 250TXA1H, 250TXA2H, 250TXA4H | ![]() |
60 | 4 |
Original remote controls may be not stable in frequency |
| OEM | 315.000 |
|
![]() |
60 | 4 |
Original remote controls may be not stable in frequency |
Additional information:
Original remote controls may be not stable in frequency: it means that the original remote controls has a transmitter circuitry which frequency may be NOT accurate. Because the universal receiver has a narrow bandwidth receiver, in this case it's usable only with remote control duplicators that are stable in frequency, like Creasol Multi .
Not supported yet!: it means that this kind of remote control will be supported later, so at this moment the receiver ss not compatible with this kind of remote control.
Added 3 levels of power saving mode: power consumption (and dissipation) reduced at 40%, 25% or 20% by turning ON the receiver for 60ms and turning OFF for 120ms, 300ms or 500ms.
20dB attenuation during learning mode, to prevent learning remote controls which transmit from a remote location.
Restricted bandwidth at 288, 300, 303, 306, 310, 315, 318, 330, 390 MHz to improve the sensitivity in those frequency. Now bandwidth is 500KHz (+-250KHz). Bandwidth at 403.55, 418, 433.92 and 868.3 MHz is not modified (250KHz, +-125KHz).
Added support to FS20 protocol, used for domotic. Thanks to Martin P.
Added support to Domia and Home Easy remote controls (tested Chacon KCT-510 and LYCT-505) used for domotic / home automation). Thanks to Mickael V.
Ultimo aggiornamento (Mercoledì 16 Maggio 2012 05:27) Scritto da Webmaster Martedì 05 Ottobre 2010 07:28

This very small device, only 29x29x10mm, can be used with almost any radio remote control in the market which transmit in a frequency between 288 and 868 MHz.
It's very easy to be installed: only two wires that should be connected in parallel with the switch used to activate the electric lock. Get a low current through these 2 wires, and when it receive a previously learned code, it shorts this wires let current flowing through the electric lock.
The operating frequency, shown in the table, can be simply programmed using the Prog button, as like as the number of activating pulses (1, 2, 3, 4) and their length (100ms, 200ms, 400ms, 800ms).
In the same door opener it's possible to learn up to 60 different remote controls, even if different brand/model, both fixed and rolling code: the number of remote controls depends by the code complex, so, for example, it's possible to manage 60 12bit remote controls or 40 KeeLoq rolling code remote controls.
When a known code is transmitted by the remote control, Creasol UniLock shorts the supply wires, simulating a pushbutton: in this way the current through the electric lock will open it. It can manage current up to 3.2Aac or 3.5Adc, and voltage up to 18Vac or 24Vdc.
Creasol UniLock can be used to:
It's supplied in nice blister with instructions printed in several languages. We can also supply this device with customized instructions.

This device has 3 wires, one of which is used as antenna and should not be connected anywhere. Two wires should be connected to the existing switch, so a little current (20mA) will pass through the electric lock supplying Creasol UniLock.
Check the voltage on the existing switch: it should be in the range 9÷24Vdc or 9÷18Vac.
Measure the current through the existing switch: it should be in the range 0,5÷3.2Aac or 0.5÷3.5Adc.
Connect the 2 wires marked as Supply in parallel to the existing switch.
Press the Prog button twice to enable learning mode: then it's possible to press a button on the existing remote control, within 10s, to learn it. Every time a new code is learned, the 10s timeout is reload.
LED flashes 2 times if the remote control has been learned, 3 times if it was already learned, 6 times if memory is full.
Press the Prog button 3 times, then it's possible to transmit, within 10s, from the remote control that need to be removed: LED flashes 4 times indicating that the remote control has been removed.
Alternatively, to blank memory (remove all remote controls), press Prog button for 10 times, LED flashes 10 times, then press again Prog button 3 times.
Press the Prog button 4 times and follow the same procedure to learn remote controls: in this case it's possible to learn one or more "master" remote control, which can be used only to enable the learning procedure remotely, without the need to press the Prog button. Note that "master" remote controls do NOT activate the door opener output.
To learn new remote controls in this way, put the "master" remote control in trasmission for 1-2 seconds, then start to transmit for 1-2 seconds from the new remote controls: every time a new remote control is learned, the 10s timer is reload to permit successive learnings.
The following schema shows how to connect the receiver Creasol Lock to activate one or two electric locks. In this way it's possible, with a remote control like Creasol Four and Creasol Multi, to easily open for example the pedestrian gate and/or the entrance door.
This cheap solution is also very simple to be integrated in the house, thanks to the easy connection and the very compact dimensions.
Creasol Lock has only 3 wires: 1 as antenna that must be left open, and 2 wires that should be connected in parallel with the existing switch.
No need for additional supply or battery!
When a valid code is transmitted by the remote control, the two wires will be internally shorted by the Creasol Lock, letting the current (max 3,2A) flows through the electric lock, activating it.
Through the Prog button, the user can program the frequency (315, 433.92 or 868.3MHz), the number of activating pulses (1, 2, 3 or 4) and the pulse duration (100, 200, 400, 800ms).

Download this application note in PDF format
Lo schema seguente mostra come collegare il ricevitore CreasolLock in modo da poter attivare una o due serrature elettriche. In questo modo è possibile, con un telecomando come CreasolFour e CreasolMulti, per aprire facilmente per esempio il cancello pedonale e / o la porta d'ingresso.
Questa soluzione a basso costo è anche molto semplice da integrare nella casa, grazie al collegamento facile e le dimensioni molto compatte.
CreasolLock ha solo 3 fili: 1 come antenna che deve essere lasciata aperta, e 2 fili che dovrebbero essere collegati in parallelo con l'interruttore esistente.
Non necessita di alimentazione supplementare o la batteria!
Quando un codice valido è trasmesso da telecomando, i due conduttori saranno cortocircuitati internamente dal CreasolLock, lasciando che la corrente (max 3,2 A) passa attraverso la serratura elettrica attivazione.
Attraverso il pulsante Prog, l'utente può programmare la frequenza (315, 433,92 o 868.3MHz), il numero di impulsi di attivazione (1, 2, 3 o 4) e la durata dell'impulso (100, 200, 400, 800 ms).
Das folgende Schema zeigt, wie der Empfänger CreasolLock verbinden so dass es einen oder zwei elektrische Schlösser aktivieren können. Auf diese Weise ist es möglich, mit einer Fernbedienung wie CreasolFour und CreasolMulti, auf einfache Weise zum Beispiel die Fußgänger-Tor und / oder die Eingangstür zu öffnen.
Diese kostengünstige Lösung ist auch sehr einfach in das Haus integriert werden, dank der einfachen Anschluss und die sehr kompakten Abmessungen.
CreasolLock hat nur 3 Drähte: 1 als Antenne, muss offen gelassen werden, und 2 Drähte, die parallel zu den vorhandenen Switch angeschlossen werden soll.
Keine Notwendigkeit für zusätzliche Versorgung oder Batterie!
Wenn ein gültiger Code von der Fernbedienung gesendet wird, werden die beiden Drähte werden intern kurzgeschlossen durch die CreasolLock und ließ den Strom (max 3,2 A) fließt durch die elektrische Sperre aktiviert ist.
Durch die Prog-Taste kann der Anwender die gewünschte Frequenz (315, 433,92 oder 868.3MHz), die Anzahl der aktivierenden Impulse (1, 2, 3 oder 4) und der Pulsdauer (100, 200, 400, 800 ms).
Le schéma suivant montre comment connecter le récepteur afin CreasolLock il peut activer une ou deux serrures électriques. De cette façon il est possible, avec une télécommande, comme CreasolFour et CreasolMulti, d'ouvrir facilement la porte, par exemple des piétons et / ou la porte d'entrée.
Cette solution bon marché est aussi très simple à être intégré dans la maison, grâce à la connexion facile et les dimensions très compactes.
CreasolLock n'a que 3 fils: 1 comme antenne qui doit être laissée ouverte, et deux fils qui doivent être connectés en parallèle avec l'interrupteur existant.
Pas besoin d'alimentation supplémentaire ou de la batterie!
Quand un code valide est transmis par la télécommande, les deux fils seront interne court-circuité par le CreasolLock, laisser le courant (max 3,2 A) circule à travers la serrure électrique de l'activer.
Grâce à la touche PROG, l'utilisateur peut programmer la fréquence (315, 433.92 ou 868.3MHz), le nombre d'impulsions activation (1, 2, 3 ou 4) et la durée d'impulsion (100, 200, 400, 800ms).
El siguiente esquema muestra cómo conectar el receptor CreasolLock lo que se puede activar una o dos cerraduras eléctricas. De esta manera es posible, con un control remoto como CreasolFour y CreasolMulti, para abrir con facilidad, por ejemplo, la entrada para peatones y / o la puerta de entrada.
Esta solución barata es también muy fácil de integrar en la casa, gracias a la conexión fácil y dimensiones muy compactas.
CreasolLock sólo tiene 3 cables: uno como una antena que debe ser libre, y dos cables que se deben conectar en paralelo con el interruptor existente.
No hay necesidad de suministro adicional o la batería!
Cuando un código válido se transmite a través del mando a distancia, los dos cables será cortocircuitado internamente por el CreasolLock, dejar que la corriente (máx. 3,2 A) fluye a través de la cerradura eléctrica activarlo.
A través del botón Prog, el usuario puede programar la frecuencia (315, 433.92 o 868.3MHz), el número de pulsos de activación (1, 2, 3 ó 4) y la duración del pulso (100, 200, 400, 800 ms).
O esquema a seguir mostra como conectar o receptor CreasolLock para que ele possa ativar uma ou duas fechaduras elétricas. Desta forma é possível, com um controle remoto como CreasolFour e CreasolMulti, para facilmente abrir, por exemplo, o portão de pedestres e / ou a porta de entrada.
Esta solução barata é também muito simples de ser integrado na casa, graças à conexão fácil e as dimensões muito compactas.
CreasolLock tem apenas 3 fios: 1 como antena que deve ser deixada em aberto, e dois fios que deve ser conectado em paralelo com o interruptor existente.
Não há necessidade de oferta adicional ou bateria!
Quando um código válido é transmitida pelo controle remoto, os dois fios será internamente em curto pela CreasolLock, deixando a corrente (max 3,2 A) flui através da fechadura elétrica ativá-lo.
Através do botão Prog, o usuário pode programar a freqüência (315, 433.92 ou 868.3MHz), o número de pulsos de ativação (1, 2, 3 ou 4) e a duração do pulso (100, 200, 400, 800ms).
| Company | Frequency | Models | Photo | Number of differente codes that can be learned |
Frequency value (cmd=5) | Notes |
| ADYX | 433.920 | ALIZE EM2C, ALIZE EM4C | 60 |
2 | ||
| BRAVO TE4433H | ![]() |
40 | 2 | |||
| AETERNA | 433.920 | TX433 1,2,4 buttons | ![]() |
60 |
2 | |
| ALLMATIC | 306.000 | ASMX2, ASMX4 | ![]() |
60 |
8 | Original remote controls may be not stable in frequency |
| 433.920 | AEMX1, AEMX2, AEMX4 | ![]() |
60 |
2 | ||
| EUROPE AUTO ARMY1, ARMY2, ARMY4 | 60 |
2 | ||||
| MX1, MX2, MX4 | ![]() |
60 |
2 | |||
| Allmatic BRO1WN, B.RO2WN, B.RO4WN, B.ROSTAR, B.RO ministar | 40 | 2 | ||||
| TECH3, BROOVER, BROSTAR |
40 | 2 | ||||
| PASS1, PASS2, PASS4 | 40 | 2 | ||||
| ALLTRONIK | 433.920 |
S429_1, S429_2, S429_4, S429_M Be sure that your remote operates at 433.92MHz! |
40 |
2 | ||
| S425 | 40 |
2 | ||||
| ANSONIC | 433.920 | SA 434-1E, SA434-2E, SA434-3E, SA434-4E |
60 |
2 | ||
| SA 434-1MINI, SA434-2MINI, SA 434-2Midi | 60 |
2 | ||||
| 868.350 | SA 868-1E, SA 868-2E, SA868-3E, SA868-4E | 60 |
3 |
|||
| SA 868-1mini/M, SA 868-2mini/M (dip switch version) | 60 |
3 |
||||
| APERTO | 433.920 | CPS1, CPS2, CPS |
![]() |
60 |
2 | |
| APRIMATIC | 433.920 | TR2, TR4 | 40 | 2 | ||
| TX2M, TX4M | 40 | 2 | ||||
| AVIDSEN | 433.920 | 100601 micromark MM23164 | ![]() |
34 |
2 | |
| 104505 | ![]() |
34 |
2 | |||
| 100951, 100955, 100550, 100400 | 34 |
2 | ||||
| TOV 4 104700, ASTRELL, 104250, 614700 | 26 | 2 | ||||
| BANDY | 433.920 | ![]() |
variable |
2 | Not sure it work, because this is a duplicator: check the original remote control | |
| BELFOX | 433.920 | DHS433-1, DHS433-2, DHS433-4, dip switch version | ![]() |
60 |
2 | |
| DHS 433,92 (7733), dip switch version | 60 |
2 | ||||
| 868.350 | DHS 868,3, dipswitch version | 60 |
3 |
|||
| HS 868-20 | 60 |
3 |
||||
| BENINCA' | 306.000 | LOT1A, LOT2A, LOT4A | ![]() |
60 |
8 | Original remote controls may be not stable in frequency |
| LOTX1A, LOTX2A, LOTX4A | ![]() |
60 |
8 | Original remote controls may be not stable in frequency | ||
| LO.TX2PS | ![]() |
60 |
8 | Original remote controls may be not stable in frequency | ||
| 433.920 | LOT1W, LOT2W, LOT4W | ![]() |
60 |
2 | ||
| LOT2WMS | ![]() |
60 |
2 | |||
| T2WK, T4WK | ![]() |
60 |
2 | |||
| LOTX1W, LOTX2W, LOTX4W | 60 |
2 | ||||
| TO.GO2WP, TO.GO4WP, TO.GO2WK, TO.GO4WK | 60 |
2 | ||||
|
IO.COLOURS, IO.GREY, TO.GO2WV, TO.GO4WV, APPLE.2, APPLE.4 |
Several images | 40 | 2 | |||
| BESIDE | 433.920 | BEZAP | ![]() |
60 |
2 | |
| HIT | ![]() |
60 |
2 | |||
| BETA ELETTRONICA | 315.000 |
BETALARM 6500 |
![]() |
60 |
4 | Original remote controls may be not stable in frequency |
| 330.000 | BETALARM 5500 | ![]() |
60 |
11 | Original remote controls may be not stable in frequency | |
| BFT | 306.000 | RCS | ![]() |
60 |
8 | Original remote controls may be not stable in frequency |
| 315.000 | VTM1, VTM2, VTM4 | ![]() |
60 |
4 | Original remote controls may be not stable in frequency | |
| 418.000 | GT01, GT02, GT04 | ![]() |
60 |
14 | ||
| 433.920 | TE01, TE02 ( TEO1, TEO2 ) | ![]() |
60 |
2 | ||
| TE04 ( TEO4 ) | ![]() |
60 |
2 | |||
| BFT MITTO 2, MITTO 4, MITTO-2A, BFT MITTO-4A, MITTO-2M, MITTO-4M BFT TRC 1, TRC 2, TRC 4 |
![]() |
40 | 2 | |||
| BREDA | 433.920 | Breda TOP432SA | Like CAME TOP432SA, blue | 60 | 2 | |
| CAME | 315.000 | Came T312M, T314M | 60 |
4 | Original remote controls may be not stable in frequency | |
| 433.920 | Came T432, T434 Came TOP432A, TOP434A, TOP432, TOP432NA, TOP434NA, Came Came TAM432, TAM434, TAM438 |
![]() |
60 |
2 | ||
| Came TOP432M, TOP434M | 60 |
2 | ||||
| Came TAM432SA | ![]() |
48 |
2 | |||
| Came TOP432SA | ![]() |
60 |
2 | |||
| Came TOP432NA, TOP434NA |
![]() |
60 |
2 | |||
| Came TWIN2, TWIN4 | 60 |
2 | ||||
| CAME TOP-432EV, TOP-434EV | ![]() |
60 | 2 | |||
| CAME ATOMO AT01, AT02, AT04 | 40 | 2 | ||||
| 868.350 | CAME TOP862NA, Came TOP864NA | 60 | 3 | |||
| CARDIN | 300.000 | S300 | ![]() |
60 |
6 | Original remote controls may be not stable in frequency |
| 310.000 | S301, S302 | ![]() |
60 |
9 | Original remote controls may be not stable in frequency | |
| 433.920 | S476 TX2, S476TX4 | ![]() |
48 |
2 | ||
|
CASALI |
330.000 | ![]() |
60 | 11 | Original remote controls may be not stable in frequency | |
| 433.920 | Genius 433 2, Genius 433 3, JA400 TM433, JA401 TM433 | ![]() |
60 | 2 |
||
| Genius A252, A254 | 40 | 2 | ||||
| 868.350 | Genius Amigo JA332, JA334, JA332 grey, JA334 grey | 40 | 3 | |||
| CASIT | 306.000 | ERTS92B, ERTS92T | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | ERTS92B, ERTS92T | ![]() |
60 | 2 |
||
| ERTS20DB, ERTS20DQ | ![]() |
60 | 2 |
|||
| ERTS476D, ERTS476Q | ![]() |
60 | 2 |
|||
| TXS1, TXS2, TXS3, TXS4, TXS6 ERTS97B, ERTS97T |
60 | 2 |
||||
| CELINSA | 433.920 | S10 1, S10 2, SAW1, SAW2 | ![]() |
48 |
2 |
|
| CENTURION | 433.920 | CLASSIC, SMART, SMART2 | ![]() |
60 | 2 |
|
| CHAMBERLAIN LIFTMASTER MOTORLIFT SEARS CRAFTSMAN |
300.000 | Chamberlain 300MC (multicode) | Not supported yet! |
|||
| 315.000 | 333LM | Not supported yet! |
||||
| 360LM, 362LM, 363LM | Not supported yet! | |||||
| 390.000 | 50CB, 53CB, 750CB, 753CB, 50LM, 53LM, 61LM, 62LM, 63LM, 139.53100, 139.53110, 139.53200, 139.53210 | Not supported yet! | ||||
| 54CB, 756CB, 54LM, 64LM, 859CB | ![]() |
Not supported yet! | ||||
| 850CB, 853CB, 959CB, 81LM, 82LM, 83LM, 84LM, 99LM |
Not supported yet! | |||||
| 33LM | Not supported yet! | |||||
| 418.000 | 4180, 4182, 4183 | Not supported yet! | ||||
| 4185 | Not supported yet! | |||||
|
787 remote
less entry |
Not supported yet! | |||||
| 433.920 | 4330E, 4332E, 4333E | Not supported yet! | ||||
| 4335E | Not supported yet! | |||||
| CPS | 433.920 | TCP3, CPS, Jolly 4 | ![]() |
60 | 2 |
|
| CPS1 TCP3, CPS2 TCP3, CPS4 TCP3 EM1CV, EM2CV, EM4CV |
![]() |
60 | 2 |
|||
| DASPI | 433.920 | Daspi Happy2 433, Daspi Pops2 | ![]() |
60 | 2 |
|
| Daspi Zero2, Zero2CLO, Zero4CLO | 60 | 2 | ||||
|
Daspi Zero2RC |
40 | 2 | ||||
| DEA | 306.000 | 306 1, 306 2, 306 4 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 306 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency | ||
| 433.920 | 433 1, 433 2, 433 4, Gold S1, Gold S2 Dea Gold 238 S1, Dea Gold 238 S2, Dea Gold 239 S4 |
![]() |
60 | 2 |
||
| Dea Gold 288-R2, Dea Gold 289-R4 | 40 | 2 | ||||
| Genie | ![]() |
60 | 2 |
|||
| Punto S2 | ![]() |
60 | 2 |
|||
| Dea MIO TD2, MIO TD4 | 60 | 2 |
||||
| Dea MIO TR2, MIO TR4 | 40 | 2 | ||||
| DELMA | 300.000 | Apollo 300, ELSAMEC Apollo 300 | ![]() |
60 | 6 |
Original remote controls may be not stable in frequency |
| Mizard 300 1, Mizard 300 2, King | ![]() |
60 | 6 |
Original remote controls may be not stable in frequency | ||
| 433.920 | Mizard 433 1, Mizard 433 2 | ![]() |
60 | 2 |
||
| King 433 2 | ![]() |
60 | 2 |
|||
| Style Copy 2CH (this is a code duplicator) | 60 | 2 |
||||
| DICKERT | 433.920 | MAHS433 01, MAHS433 04 Note: we can NOT guarantee that it can be duplicated, because it depends by the receiver. |
![]() |
Not supported yet! |
||
| S10-433A1L00, S10-433A4L00, S20-433A1L00, S20-433A4L00, S20-433A1000, S20-433A4000 Note: only RED buttons model can be duplicated! |
![]() |
60 | 2 |
|||
|
S5-433-A2L00, S5U-433-A2L00 |
![]() |
60 | 2 |
|||
| 868.350 | HS868-21 Note: only RED buttons model can be duplicated! |
![]() |
60 | 3 |
||
|
S5-868A2L00, S5U-868A2L00 |
![]() |
60 | 3 |
|||
| S10-868A100, S10-868A400, S20-868A1L00, S20-868A4L00, S20-868A1000, S20-868A4000 Note: only RED buttons model can be duplicated! |
![]() |
60 | 3 |
|||
| DIGICODE | 300.000 310.000 |
DC5010, DC5012, DC5030, DC5032, DC5040, DC5042, DC5060, DC5062, DC5070, DC5072 | ![]() |
60 | 6 or 9 |
Original remote controls may be not stable in frequency |
| DITEC | 433.920 | GOL4C | ![]() |
60 | 2 |
|
|
GOL4 |
![]() |
34 |
2 |
|||
|
BIX LS2, BIX LP2, BIX LG4 |
![]() |
34 |
2 |
|||
| DOITRAND FDOITRAND |
433.920 | MPSTF2E JAUNE, MPSTF4E, HYPERPHONE MPSTF2E_GRISE | ![]() |
60 | 2 |
|
| TS2DE, TS4DE |
![]() |
60 | 2 |
|||
| DOORHAN | 433,920 | 40 | 2 | |||
| DOORMATIC | 433.920 | SAW | ![]() |
60 | 2 |
|
|
DUCATI |
433.920 | TSAW1, TSAW2, TSAW3, TSAW4, 124 ELBER TSAW1, TSAW2, TSAW3, TSAW4 RONDY TSAW1, RONDY TSAW2, RONDY TSAW3 |
![]() |
60 | 2 |
|
| TPR10-A, TPR20-A RONDY TPR10_A, RONDY TPR20_A |
![]() |
60 | 2 |
|||
| TE2 | ![]() |
60 | 2 |
|||
| 6203blue and transparent, with transparent buttons |
|
60 | 2 |
|||
| 6203, with blue or red buttons | ![]() |
40 | 2 | |||
| HC6204 | ![]() |
40 | 2 | |||
| ELBE | 433.920 | 501, 502, 504 | ![]() |
60 | 2 |
|
| 502a, 504a | ![]() |
60 | 2 |
|||
| 502, 504 | ![]() |
60 | 2 |
|||
| ELCA | 300.000 | Aster 1100, Aster 1101 | ![]() |
60 | 6 |
Original remote controls may be not stable in frequency |
| 433.920 |
IRIS, IRIS 9CH. |
![]() |
60 | 2 |
||
| ASTER2 | ![]() |
60 | 2 |
|||
| Aster 1000, Aster1001. Colors: black, blue, light grey |
![]() |
60 | 2 |
|||
| GEMINI 9CH | 60 | 2 |
||||
| VIRGO | ![]() |
60 | 2 |
|||
|
ELV |
868.350 | FS20 S4, FS20 S8, FS20 S8-2, FS20 S16, FS20S16R, FS20 S20-2, FS20 S20-3 |
![]() |
24 | 3 | |
| ELVOX | 433.920 | Elvox ET | 60 | 2 |
||
| Elvox ET03, ET04 | 60 | 2 |
||||
| Elvox ERT01 | 40 | 2 | ||||
| 868.350 | Elvox ET08 | 60 | 3 |
|||
| ERONE | 433.920 | SETDS39433E2, SETDS39433E4 | 60 | 2 |
||
| Erone SETR2641-AM2.B, SETR2641-AM2.N, SETR2641-AM2.R, SETR2641-AM2.C, SETR2641AM1, S5TR2641E2, S5TR2641E4, S2TR2641-E2M, SETR2641-TM, TSW2641E1 | ![]() |
40 | 2 | |||
| 868.350 | Erone S2TR2681-E2, 2TR2681-E4, 2TR2681-E2M | ![]() |
40 | 2 | ||
| ERREKA | 433.920 | Erreka LUNA, SMAT RESON 1, RESON 2, Erreka RESON 3 | ![]() |
48 | 2 | |
| Erreka ROLLER-1, ROLLER-2, Erreka ROLL-2 JOY, Erreka Roll-4 JOY, Erreka LIRA, Erreka IRIS 2, IRIS 4 | ![]() |
40 | 3 | |||
| 868.300 | Erreka Roller 1 868, Roller 2 868, Erreka Roller 4 868 | 40 | 4 | |||
| EUROPE AUTOMATISME | 306.000 | ASMY1, ASMY2, ASMY4 | 60 | 8 | Original remote controls may be not stable in frequency | |
| 433.920 | ARMY1, ARMY2, ARMY4 | 60 | 2 | |||
| S1, S2, S3 | 60 | 2 | ||||
| FAAC | 300.000 | Faac TM300S, TM300S05 H Faac TM1 300, TM2 300, TM3 300 |
![]() |
34 |
6 |
Original remote controls may be not stable in frequency |
| 315.000 | Faac T1, T2, T3 Faac TM1 315, TM2 315, TM3 315 |
![]() |
34 |
4 |
Original remote controls may be not stable in frequency | |
| 330.000 | Faac TM1, TM2, TM3 Faac TM1 330, TM2 330, TM3 330 |
![]() |
34 |
11 |
Original remote controls may be not stable in frequency | |
| 418.000 | Faac TM1 418 DS, TM2 418 DS, TM3 418 DS | ![]() |
34 | 14 |
||
| Faac TM 418SL, TM1 418SL, TM2 418 SL, TM3 418SL | ![]() |
34 |
14 |
|||
| 433.920 | Faac TM1 433 DS, TM2 433 DS, TM3 433 DS TM1 433DS DPH, TM2 433DS DPH, TM3 433DS DPH |
![]() |
60 | 2 |
||
| Faac TML2 433 SLR, TML4 433 SLR, TML2-433-SLR, TML4-433-SLR, TML2 433 ESL, TML4 433 ESL | ![]() |
34 |
2 |
|||
| Faac TML2 433 SLP, TML4 433 SLP, TML2-433-SLP, TML4-433-SLP | 34 |
2 |
||||
| Faac T2 433 SLH, Faac T4 433 SLH |
40 | 2 | ||||
| Faac TML2 433 SLH, TML4 433 SLH | 40 | 2 | ||||
| Faac XT2 433 SLH, XT4 433 SLH | ![]() |
40 | 2 | |||
| 868.350 | Faac TM1 868 DS, TM2 868 DS, TM3 868 DS Faac TM1 868DS DPH, TM2 868DS DPH, TM3 868DS DPH |
![]() |
60 | 3 |
||
| Faac T2 868 SLH, Faac T4 868 SLH | 40 | 3 | ||||
|
Faac TML2 868 SLH, TML4 868 SLH |
40 | 3 | ||||
| Faac XT2 868 SLH, Faac XT4 868 SLH | ![]() |
40 |
3 |
|||
| Faac DL2 868 SLH, DL4 868 SLH | ![]() |
40 | 3 | |||
|
FADINI BPT |
315.000 | ASTRO75-1, ASTRO75-2, ASTRO75-4 | ![]() |
60 | 4 |
Original remote controls may be not stable in frequency |
| 433.920 | 433 2M, Astro43_2m | ![]() |
60 | 2 |
||
| Astro433-2, Astro433-4, Astro43-2, Astro43-4 | ![]() |
60 | 2 |
|||
| Fadini JUBI 433/2, JUBI 433/4, Fadini JUBI SMALL 433/2 | ![]() |
40 | 2 | |||
| Fadini SITI 2, Fadini SITI 4 | 40 | 2 | ||||
| 868.350 | Fadini BIRIO 2, Fadini BIRIO 4 | 40 | 3 | |||
| FERPORT | 433.920 | Tac1, Tac2, Tac4, Tac1k, Tac2k, Tac4k, Tac2kr | ![]() |
60 | 2 |
|
|
FUNKMODUL ELSECO |
433.920 | T433A2K1, T433A2K2 | 60 | 2 |
||
| T433A2K4, T433A2K4n | 60 | 2 |
||||
| GIBIDI | 306.000 | TS2M | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | Open TMB 433, OPEN TMQ 433, OPEN OUT 2, OPEN OUT 4 | ![]() |
60 | 2 |
||
| Gibidi Domino, AU1600, AU1610, AU1680, AU1680 wood, AU1810 | ![]() |
40 | 2 | |||
| GOBBATO | 306.000 | T306 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | TRA3S | 40 | 2 | |||
| GRIFFON | 403.55 | Griffon 404 MHz dip switch remotes and duplicating remotes | ![]() |
60 | 13 |
|
| 433.92 | Griffon 433 MHz dip switch remotes and duplicating remotes | ![]() |
60 | 2 |
||
| GTO | 318.000 | GTO Mighty Mule 1/2 buttons, RB741, RB742 | ![]() |
Not supported yet! |
||
| GTO Mighty Mule 3 buttons, RB743 | ![]() |
Not supported yet! |
||||
| GULLIVER | 306.000 | MDRQ 306 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | MDW 2E | ![]() |
60 | 2 |
||
| HAUSS | 433.920 | Pocket 3750-1, Pocket3750-2, Pocket 3750-4 | 60 | 2 |
||
| HEDDOF | 318.000 | P219-1, P219-2 | ![]() |
Not supported yet! |
||
| P220-1, P220-2, P220-3 | ![]() |
Not supported yet! |
||||
| HORMANN HOERMANN |
433.920 |
HSM2, HSM4, yellow buttons |
![]() |
30 |
2 |
|
| 868.300 | HS1, HS2, HS4, blue buttons |
|
30 |
3 |
||
| HSD2 | 30 |
3 |
||||
| HSE2, HSE4, blue buttons | 30 |
3 | ||||
| HSM2, HSM4, blue buttons | ![]() |
30 |
3 |
|||
| HSP4, blue buttons | ![]() |
30 |
3 |
|||
| HSS2, HSS4, blue buttons | 30 |
3 |
||||
| HSZ1-868, HSZ2-868 | ![]() |
30 |
3 |
|||
| HRC | 433.920 | 60 | 2 |
|||
| JAY | 433.920 | UBEI x1 SL1 | ![]() |
60 | 2 |
|
| UBET 11, UBET 21, UBET 31, UBET 41, UBET 61Â | ![]() |
60 | 2 |
|||
| KEY AUTOMATION | 433.920 | 900TXB-42, 900TXB-42N, 900TXP-42, 900TXP-42N | ![]() |
60 | 2 |
|
| 900TXB-44, 900TXG-44 | 60 | 2 |
||||
| 900SUB-44, 900SUB-44N, 900SUB-44W, 900SUB-44WN | |
60 | 2 |
|||
| 900TXK-42, 900TXW-42,900TXK-44, 900TXW-44 | ![]() |
60 | 2 |
|||
| Key TXB-42R, TXP-42R TXG-42R, TXG-44R, TXB-42R, TXB-44R SUB-44R TXW-42R, TXW-44R, TXK-42R, TXK-44R |
|
40 | 2 | |||
| KING | 433.920 | Not yet supported! |
||||
| LABEL IUPPITER |
306.000 | MDR, IUPPITER 306 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | RJW/1E, RJW/2E, RJW/4E, RJW/12E | ![]() |
60 | 2 |
||
| MDW/1E, MDW/2E | ![]() |
60 | 2 |
|||
| SPYCO1, SPYCO2, SPYCO3 | ![]() |
40 | 2 | |||
| LEB | 306.000 | TSA4 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | TMW | ![]() |
60 | 2 |
||
| TSAW2N, TSAW4N | ![]() |
60 | 2 |
|||
| TCP3Â (this is a code duplicator) | Variable |
2 |
Not sure it work, because this is a duplicator: check the original remote control | |||
| TRK4 | ![]() |
60 | 2 |
|||
| TPW4 | ![]() |
60 | 2 |
|||
| 868.300 | TPK4 | ![]() |
60 | 3 |
||
| LINCE | 433.920 | LR 2035 | 60 | 2 | ||
| LINEAR |
300.000 |
MULTI-CODE 308911, 308913, 1089 | ![]() |
60 | 6 or 9 |
Original remote controls may be not stable in frequency |
| MULTI-CODE 412001, 414001, 109410, 109710 | 60 | 6 or 9 |
Original remote controls may be not stable in frequency | |||
| MULTICODE 306010, 307010, 108210 | ![]() |
60 | 6 or 9 |
Original remote controls may be not stable in frequency | ||
| MULTI-CODE 308301, 308302 | 60 | 6 or 9 |
Original remote controls may be not stable in frequency | |||
| MULTI-CODE 105015 | ![]() |
60 | 6 or 9 |
Original remote controls may be not stable in frequency | ||
| 310.000 | Delta3 Moore-o-Matic: DT, DT2, DT2A, DT22A, DTC, DTD |
![]() |
60 | 9 | Not supported yet! | |
| Delta 3 Moore-o-Matic: DT3, DT4 | 60 | 9 | Not supported yet! |
|||
| Delta 3 Moore-o-Matic: Mini-T LB "LadyBug" | ![]() |
60 | 9 | Not supported yet! |
||
| 312.000 | Delta3 DTK (canada) | ![]() |
Not supported |
|||
| MA SYSTEM | 433.920 | MA TX1, MA TX2, MA TX3 | ![]() |
60 | 2 |
|
| MARANTEC | 418.000 | D212, D222, D232 | 34 |
14 |
||
| 433.920 | D101 | ![]() |
60 | 2 |
||
| D12 | ![]() |
60 | 2 | |||
| D212, D222, D232 | 60 | 2 | ||||
| Digital 302, D302 | ![]() |
34 |
2 | |||
| Digital 304, D304 | ![]() |
34 |
2 | |||
| 868.300 | Digital 302, D302 | ![]() |
34 |
3 | ||
| Digital 304, D304 | ![]() |
34 |
3 |
|||
| MCZ | 433.920 | Aster | 60 | 2 |
||
| MEIßNER MEISSNER |
433.920 | LW433-1, LW433-2, LW433-4 | 60 | 2 |
||
| Pocket 3750 1, 2, 4 | 60 | 2 |
||||
| MONSEIGNEUR | 433.920 | ARC2, ARC4 | ![]() |
60 | 2 |
|
| TDR 400 3845, TDR 400 3846, TDR 400 3847 T1SAW433, T2SAW433, T4SAW433 |
![]() |
60 | 2 |
|||
|
MOTORLINE |
433.920 | MX1, MX2, MX3, MX4, MX6 MX11, MX12, MX13 |
![]() |
60 | 2 |
|
| MOTOSTAR | 433.920 | CLIKSTAR2, CLICKSTAR4 CLICK-4M, CLICKSTAR RE 532, CLICKSTAR RE 534 |
60 | 2 |
||
| NICE | 306.000 | EASY S1, S2, S4 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | FLO1, FLO2, FLO4 | ![]() |
60 | 2 |
||
| VERY VE | 60 | 2 |
||||
| NOLOGO | 306.000 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
|
| 433.920 | ECO DIP | ![]() |
60 | 2 |
||
| NOVOTECNICA | 306.000 | BIT N1, BIT N2 | 60 | 8 |
Original remote controls may be not stable in frequency |
|
| BIT NT1, BIT NT2, BIT NT4 | 60 | 2 |
||||
| OG | 433.920 | OG62, OG64 | ![]() |
34 |
2 |
|
| O&O OeO O and O |
433.920 | T-COM DS 4-2, T-COM DS 4-4 | 60 | 2 |
||
| OeO T-COM R4-2, O&O TCOM R4-4 | 40 | 2 | ||||
| OeO ELIOT 2 - R4, O&O ELIOT 4 - R4 | ![]() |
40 | 2 | |||
| 868.350 | OeO T-COM R8-2, O&O TCOM R8-4 | ![]() |
40 | 3 | ||
| OPENOUT | 306.000 | TS2M | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | TMQ 433 2, TMQ 433 4 | ![]() |
60 | 2 |
||
| PIAZZETTA | 433.920 | 4 buttons for wood/pellet heater | 60 | 2 |
||
| PORTAMATIC | 433.920 | MPH01, MPH02 | ![]() |
60 | 2 |
|
|
POWERFIX Profi |
433.920 | RCB-A 3600R | 60 | 2 |
||
| PRASTEL | 306.000 | NCSMT1, NCSMT2P, NCSMT4P | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| KMFT2P, KMFT4P, KMFT2P93, KMFT4P93 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency | ||
| 433.920 | MPSTF2E, MPSTF4E | ![]() |
60 | 2 |
||
| PROEM | 433.920 | ER2C4ACM, ER4C4ACM | 60 | 2 |
||
| PROGET | 433.920 | ETY_433N2, ETY 433N4 | ![]() |
60 | 2 |
|
| EMI433-N2 | ![]() |
60 | 2 |
|||
| PROTECO | 433.920 | TX433 | ![]() |
60 | 2 |
|
| EUROMATIC | ![]() |
60 | 2 |
|||
| HIT | ![]() |
60 | 2 |
|||
| PUJOL | 288.000 | JCM TRINARIO 1, TRINARIO 2, TRINARIO 3 | ![]() |
60 | 5 |
Original remote controls may be not stable in frequency |
| 288.000 | TT1, TT2, TRINARIO 1, TRINARIO 2 | ![]() |
60 | 5 |
Original remote controls may be not stable in frequency | |
| PULSAR | 318.000 | 9931-318, 9931T-318 | ![]() |
Not supported yet! |
||
| QUASAR | 433.920 | 433 TANGO SLIM BLEU | ![]() |
40 |
2 |
|
| QUICK | 433.920 | Model: 302 | |
60 | 2 |
|
| ROGER | 433.920 | R80/TX12, R80/TX14, R80/TX12R, R80/TX14R | 40 | 2 |
||
| H80/TX22 | ![]() |
|||||
| G80/TX32, G80/TX34, G80/TX32R, G80/TX34R | ||||||
| SEA |
433.920 | ![]() |
60 | 2 |
||
| SMART433_TX2, SMART433_TX3 SMART433_TX2_COPY,SMART433_TX3_COPY Smart2, Smart3 |
![]() |
60 | 2 |
|||
| 868.350 | 231103, SEA868_4 | ![]() |
60 | 3 |
||
| 231103, Head2 Dip Switch | ![]() |
60 | 3 |
|||
| SMART868-TX2, SMART868-TX3 Smart2, Smart3 |
![]() |
60 | 3 |
|||
| SEAV | 306/330 |
TX1, TX2, TX3, TX4, TX1/330 |
![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 433.920 | TXS1, TXS2, TXS3, TXS4 | ![]() |
60 | 2 |
||
| Behappy S1, Behappy S2, Behappy S3 | 60 | 2 |
||||
| Seav Behappy RS1, Behappy RS2, Behappy RS3 | 40 | 2 | ||||
| Be Easy TX, Be Easy Murale2 | ![]() |
60 | 2 |
|||
| BeSmart S2, BeSmart S4 | 60 | 2 |
||||
| BeFree S1 | 60 | 2 |
||||
| 868.300 | BeSmart H2, BeSmart H4 | 60 | 3 |
|||
| BeFree H1 | 60 | 3 |
||||
| SECURVERA | 433.920 | SV R2C | ![]() |
60 | 2 |
|
| SV R2C | ![]() |
60 | 2 |
|||
| SV R4C | ![]() |
60 | 2 |
|||
| SV R6C | ![]() |
60 | 2 |
|||
| SENDER | 433.920 | 60 | 2 |
|||
|
SENTRY MARTIN ELECTRONICS |
403.550 | SENTRY binary, SENTRY trinary |
s |
60 | 13 |
|
| 433.920 | SENTRY binary | 60 | 2 |
|||
| SERAI | 310.000 | OG/32 | ![]() |
34 |
9 |
Original remote controls may be not stable in frequency |
| 433.920 | OG/52, OG/54, OG/82, OG/84 | ![]() |
34 |
2 |
||
| OG/28, OG/48, OG/62, OG/64 | ![]() |
34 |
2 |
|||
| OG/02, OG/04 | ![]() |
34 |
2 |
|||
| SICE | 433.920 | TX4 CLACK Bigfoot | ![]() |
Not supported! |
||
| SILVELOX - INTRA | 306.000 | Green case with black buttons | ![]() |
60 | 8 | Original remote controls may be not stable in frequency |
| 433.920 | Silvelox Intra HSM4 | ![]() |
30 | 2 | ||
| SIMBA | 433.920 | Simba RC1 | 60 | 2 | ||
| SIMINOR | 433.920 | ER2C4ACM, ER4C4ACM, ER2C4ACS, ER4C4ACS |
60 | 2 |
||
| SKYLINK |
300.000 |
MultiLink SD300M, Skylink 100, LD310M, SD310M |
![]() |
60 | 6 or 9 |
Original remote controls may be not stable in frequency |
| 318.000 | Skylink Mltilink PD-318M | ![]() |
Not supported yet! |
|||
| 390.000 | Multilink CB-390M, CD-390M (versions compatible with Chamberlain) |
![]() |
Not supported yet! |
|||
| SMD | 433.920 | LW433-1, LW433-2, LW433-4 : AM models only | 60 | 2 |
||
| SOMFY | 433.920 | LEB TMW | ![]() |
60 | 2 |
|
| STAGNOLI | 433.920 | ZEUS AZTR | ![]() |
60 | 2 |
|
| 868.350 | ZEUS AZTR | ![]() |
60 | 3 |
||
| STANLEY | 310.000 | 24286 | ![]() |
60 | 9 |
Original remote controls may be not stable in frequency |
| 1082 | ![]() |
60 | 9 |
Original remote controls may be not stable in frequency | ||
| 1050 | ![]() |
60 | 9 |
Original remote controls may be not stable in frequency | ||
| 1094 | 60 | 9 |
Original remote controls may be not stable in frequency | |||
| 1097 | ![]() |
60 | 9 |
Original remote controls may be not stable in frequency |
||
| STARTEC | 433.920 | TXQ2 | ![]() |
60 | 2 |
|
| STINGER | 300.000 310.000 318.000 390.000 |
300MCD21V, 300MCD22V 310MCD21V, 310LID21V, 310LID22V 318ALD31V 390LMD21V, 390LMPB1V |
diff. colors |
This is a compatible remote control: please look for the compatibility of the original retmotes! |
||
| TAU | 315.000 | 250 TXA2, 250 TXA4 | ![]() |
60 | 4 |
Original remote controls may be not stable in frequency |
| 433.920 | 250 SLIM, 250K-SLIM, 250K-SLIMC | ![]() |
60 | 2 |
||
| 250TXD2, 250TXD4 | ![]() |
60 | 2 |
|||
| 250BUG2, 250BUG4 | ![]() |
60 | 2 | |||
| 250T-4, 250T-4C | 60 | 2 |
||||
| TEC KEY | 300.000 | MK1010 | ![]() |
60 | 6 |
Original remote controls may be not stable in frequency |
| TECNOMATIC | 433.920 | TQ433 | 60 | 2 |
||
| TEDSEN BERNER GFA Elektromaten |
433.920 | SKX1MD, SKX2MD, SKX3MD, SKX4MD | ![]() |
60 | 2 |
|
| SKX1KD, SKX2KD, SKX4KD, SKX6KD | 60 | 2 |
||||
| SKX1DL, SKX2DL, SKX3DL, SKX4DL | ![]() |
60 | 2 | |||
| SKX1LC, SKX2LC, SKX3LC, SKX4LC | 60 | 2 | ||||
| SKX1SL, SKX2SL, SKX3SL, SKX4SL | 60 | 2 | ||||
| SKJ | ![]() |
60 | 2 | |||
| SKX1WD, SKX2WD, SKX4WD, SKX11WD, SKX22WD, SKX44WD | ![]() |
60 | 2 | |||
| TELCOMA | 306.000 | RCST2, RCST4 | 40 |
8 | Original remote controls may be not stable in frequency | |
| 433.920 | TELCOMA EDGE 2, TELCOMA EDGE 4 | 40 | 2 | |||
| TELCOMA TANGO 2 SW, TANGO4 SW | ![]() |
40 |
2 |
|||
| TANGO BLUE 2, TANGO 4 BLUE, TANGO BLEU 2, TANGO BLEU 4 | 40 |
2 |
||||
| TANGO 2 N, TANGO 4 N | 40 |
2 |
||||
| TANGO 2 SLIM, TANGO 4 SLIM | ![]() |
40 |
2 |
|||
| Telcoma Noire2, Noire4 |
34 |
2 | ||||
| TANGO WIN3 | ![]() |
40 |
2 | |||
| TANGO2, TANGO4 | 40 |
2 |
||||
| TELECO | 433.920 |
Teleco TXP433A01 |
![]() |
40 |
2 |
|
| TELEMATIC | 300.000 | TL1, TL2 | ![]() |
60 | 6 | Original remote controls may be not stable in frequency |
| TKC | 433.920 | TSAW433 | ![]() |
60 | 2 |
|
| TORAG | 433.920 | S429 1, S429 2, S429 4 | ![]() |
60 | 2 |
|
| TORMATIC DORMA NOVOFERM |
433.920 | HS, Dorma HS43 1E, HS43 2E, HS43 3E, HS43 4E | ![]() |
60 | 2 |
|
| MAHS, Siebau, Novoferm, Dorma | ![]() |
60 | 2 |
|||
| MHS, MHS43-1 | ![]() |
60 | 2 |
|||
| Tormatic Novoferm Novotron 502 Tormatic Novoferm Novotron 504 MCHS43, MNHS433-02, MNHS433-04 |
40 | 2 | ||||
| TREMA | 433.920 | TO93TV1, TO93TV2, TO93TV4 | ![]() |
60 | 2 |
|
| TUBAUTO | 433.920 | DIGITAL 101 433 | ![]() |
60 | 2 |
|
| V2 | 306.000 | TRR1_306 | ![]() |
60 | 8 |
Original remote controls may be not stable in frequency |
| 318.000 | TPS1K | ![]() |
60 | 10 | Original remote controls may be not stable in frequency | |
| 433.920 |
PHOENIX series: Phoenix2, Phoenix2P, Phoenix4, Phoenix4P, TXC2 Contr.47, TXC4 Contr.47, Handy2 Contr.47, Handy4 Contr.47, TRC4 Contr.47, TSC4 Contr.47 . |
|
34 |
2 |
||
| TCP3 | ![]() |
60 | 2 | |||
| TCP3, ARC3 | ![]() |
60 | 2 | |||
| TCP3 | ![]() |
60 | 2 | |||
| TPR | ![]() |
60 | 2 | |||
| T1SAW/433, T2SAW/433, T4SAW/433 | ![]() |
60 | 2 | |||
| TRR1, TRR2, TRR4 | ![]() |
60 | 2 | |||
| PMR2, PMR4 | ![]() |
60 | 2 | |||
| 868.300 | PHOENIX series: Phoenix2-868, Phoenix2P-868, Phoenix4-868, Phoenix4P-868. |
![]() |
34 | 3 | ||
| VISONIC | 315.000 | WT100, WT100A, WT101, WT101A, WT102, WT104,WT-201, WT-201A, WT-201WP, WT-201AWP | ![]() |
60 | 4 |
|
| 418.000 | WT-100, WT-100A, WT-101, WT-101A, WT-102, WT-104,WT-201, WT-201A, WT-201WP, WT-201AWP | 60 | 14 |
|||
| 433.920 | WT 100, WT 100A, WT 101, WT 101A, WT 102, WT 104,WT 201, WT 201A, WT 201WP, WT 201AWP | 60 | 2 |
|||
| VSEG | 433.920 | CR SLIM | 60 | 2 |
||
| WAINE-DALTON | 433.920 | S429-1, S429-2, S429-4, S429-mini | 48 | 2 |
||
| S425 | 48 | 2 |
||||
|
WECLA |
433.920 | 433, 433_2 | ![]() |
60 | 2 |
|
| ZULLAN | 315.000 | 250TXA1H, 250TXA2H, 250TXA4H | ![]() |
60 | 4 |
Original remote controls may be not stable in frequency |
| OEM | 315.000 |
|
![]() |
60 | 4 |
Original remote controls may be not stable in frequency |
Additional information:
Original remote controls may be not stable in frequency: it means that the original remote controls has a transmitter circuitry which frequency may be NOT accurate. Because the universal receiver has a narrow bandwidth receiver, in this case it's usable only with remote control duplicators that are stable in frequency, like Creasol Multi .
Not supported yet!: it means that this kind of remote control will be supported later, so at this moment the receiver ss not compatible with this kind of remote control.
Added 3 levels of power saving mode: power consumption (and dissipation) reduced at 40%, 25% or 20% by turning ON the receiver for 60ms and turning OFF for 120ms, 300ms or 500ms.
20dB attenuation during learning mode, to prevent learning remote controls which transmit from a remote location.
Restricted bandwidth at 288, 300, 303, 306, 310, 315, 318, 330, 390 MHz to improve the sensitivity in those frequency. Now bandwidth is 500KHz (+-250KHz). Bandwidth at 403.55, 418, 433.92 and 868.3 MHz is not modified (250KHz, +-125KHz).
Added support to FS20 protocol, used for domotic. Thanks to Martin P.
Added support to Domia and Home Easy remote controls (tested Chacon KCT-510 and LYCT-505) used for domotic / home automation). Thanks to Mickael V.
Ultimo aggiornamento (Martedì 15 Novembre 2011 22:10) Scritto da Webmaster Martedì 05 Ottobre 2010 07:18

This very small device, only 29x29x10mm, can be used to activate an electric lock (for entrance doors, pedestrian gates, ...) through a remote control like Creasol Multi.
It's very easy to be installed: only two wires should be connected in parallel with the existing switch used to supply the electric lock.
The operating frequency, 433.92 MHz, 868.3 MHz or 315 MHz, can be simply programmed using the Prog button, as like as the number of activation pulses and their length.
When the proper code is transmitted by the remote control, creLock shorts the supply wires, letting current flow through the electric lock. More information in the application note, below.
The maximum admitted current is 3.5Adc (direct current) or 3.2Aac (alternate current).
Creasol Lock instructions in PDF format
To activate this device, we suggest to use Creasol Four remote controls for 433.92MHz, and Creasol Multi for 433.92, 868.3 and 315 MHz. In this case you can use the same remote controls for up to 4 Creasol Lock devices, as like as for other supported devices (gate operators, barriers, garage doors, ...). If your operators works in different frequencies between 286 and 868.3 MHz, you can use Creasol Multi remote control to open, for example,
The device is supplied in blister, with instructions printed in many languages. We can also sell the product with customized instructions.

The following schema shows how to connect the receiver Creasol Lock to activate one or two electric locks. In this way it's possible, with a remote control like Creasol Four and Creasol Multi, to easily open for example the pedestrian gate and/or the entrance door.
This cheap solution is also very simple to be integrated in the house, thanks to the easy connection and the very compact dimensions.
Creasol Lock has only 3 wires: 1 as antenna that must be left open, and 2 wires that should be connected in parallel with the existing switch.
No need for additional supply or battery!
When a valid code is transmitted by the remote control, the two wires will be internally shorted by the Creasol Lock, letting the current (max 3,2A) flows through the electric lock, activating it.
Through the Prog button, the user can program the frequency (315, 433.92 or 868.3MHz), the number of activating pulses (1, 2, 3 or 4) and the pulse duration (100, 200, 400, 800ms).

Download this application note in PDF format
Lo schema seguente mostra come collegare il ricevitore CreasolLock in modo da poter attivare una o due serrature elettriche. In questo modo è possibile, con un telecomando come CreasolFour e CreasolMulti, per aprire facilmente per esempio il cancello pedonale e / o la porta d'ingresso.
Questa soluzione a basso costo è anche molto semplice da integrare nella casa, grazie al collegamento facile e le dimensioni molto compatte.
CreasolLock ha solo 3 fili: 1 come antenna che deve essere lasciata aperta, e 2 fili che dovrebbero essere collegati in parallelo con l'interruttore esistente.
Non necessita di alimentazione supplementare o la batteria!
Quando un codice valido è trasmesso da telecomando, i due conduttori saranno cortocircuitati internamente dal CreasolLock, lasciando che la corrente (max 3,2 A) passa attraverso la serratura elettrica attivazione.
Attraverso il pulsante Prog, l'utente può programmare la frequenza (315, 433,92 o 868.3MHz), il numero di impulsi di attivazione (1, 2, 3 o 4) e la durata dell'impulso (100, 200, 400, 800 ms).
Das folgende Schema zeigt, wie der Empfänger CreasolLock verbinden so dass es einen oder zwei elektrische Schlösser aktivieren können. Auf diese Weise ist es möglich, mit einer Fernbedienung wie CreasolFour und CreasolMulti, auf einfache Weise zum Beispiel die Fußgänger-Tor und / oder die Eingangstür zu öffnen.
Diese kostengünstige Lösung ist auch sehr einfach in das Haus integriert werden, dank der einfachen Anschluss und die sehr kompakten Abmessungen.
CreasolLock hat nur 3 Drähte: 1 als Antenne, muss offen gelassen werden, und 2 Drähte, die parallel zu den vorhandenen Switch angeschlossen werden soll.
Keine Notwendigkeit für zusätzliche Versorgung oder Batterie!
Wenn ein gültiger Code von der Fernbedienung gesendet wird, werden die beiden Drähte werden intern kurzgeschlossen durch die CreasolLock und ließ den Strom (max 3,2 A) fließt durch die elektrische Sperre aktiviert ist.
Durch die Prog-Taste kann der Anwender die gewünschte Frequenz (315, 433,92 oder 868.3MHz), die Anzahl der aktivierenden Impulse (1, 2, 3 oder 4) und der Pulsdauer (100, 200, 400, 800 ms).
Le schéma suivant montre comment connecter le récepteur afin CreasolLock il peut activer une ou deux serrures électriques. De cette façon il est possible, avec une télécommande, comme CreasolFour et CreasolMulti, d'ouvrir facilement la porte, par exemple des piétons et / ou la porte d'entrée.
Cette solution bon marché est aussi très simple à être intégré dans la maison, grâce à la connexion facile et les dimensions très compactes.
CreasolLock n'a que 3 fils: 1 comme antenne qui doit être laissée ouverte, et deux fils qui doivent être connectés en parallèle avec l'interrupteur existant.
Pas besoin d'alimentation supplémentaire ou de la batterie!
Quand un code valide est transmis par la télécommande, les deux fils seront interne court-circuité par le CreasolLock, laisser le courant (max 3,2 A) circule à travers la serrure électrique de l'activer.
Grâce à la touche PROG, l'utilisateur peut programmer la fréquence (315, 433.92 ou 868.3MHz), le nombre d'impulsions activation (1, 2, 3 ou 4) et la durée d'impulsion (100, 200, 400, 800ms).
El siguiente esquema muestra cómo conectar el receptor CreasolLock lo que se puede activar una o dos cerraduras eléctricas. De esta manera es posible, con un control remoto como CreasolFour y CreasolMulti, para abrir con facilidad, por ejemplo, la entrada para peatones y / o la puerta de entrada.
Esta solución barata es también muy fácil de integrar en la casa, gracias a la conexión fácil y dimensiones muy compactas.
CreasolLock sólo tiene 3 cables: uno como una antena que debe ser libre, y dos cables que se deben conectar en paralelo con el interruptor existente.
No hay necesidad de suministro adicional o la batería!
Cuando un código válido se transmite a través del mando a distancia, los dos cables será cortocircuitado internamente por el CreasolLock, dejar que la corriente (máx. 3,2 A) fluye a través de la cerradura eléctrica activarlo.
A través del botón Prog, el usuario puede programar la frecuencia (315, 433.92 o 868.3MHz), el número de pulsos de activación (1, 2, 3 ó 4) y la duración del pulso (100, 200, 400, 800 ms).
O esquema a seguir mostra como conectar o receptor CreasolLock para que ele possa ativar uma ou duas fechaduras elétricas. Desta forma é possível, com um controle remoto como CreasolFour e CreasolMulti, para facilmente abrir, por exemplo, o portão de pedestres e / ou a porta de entrada.
Esta solução barata é também muito simples de ser integrado na casa, graças à conexão fácil e as dimensões muito compactas.
CreasolLock tem apenas 3 fios: 1 como antena que deve ser deixada em aberto, e dois fios que deve ser conectado em paralelo com o interruptor existente.
Não há necessidade de oferta adicional ou bateria!
Quando um código válido é transmitida pelo controle remoto, os dois fios será internamente em curto pela CreasolLock, deixando a corrente (max 3,2 A) flui através da fechadura elétrica ativá-lo.
Através do botão Prog, o usuário pode programar a freqüência (315, 433.92 ou 868.3MHz), o número de pulsos de ativação (1, 2, 3 ou 4) e a duração do pulso (100, 200, 400, 800ms).